Diferencia entre revisiones de «API SMS Gigas»

De GIGAS DOCS
Saltar a: navegación, buscar
(→‎JSON)
(→‎SUBACCOUNT)
 
(No se muestran 5 ediciones intermedias del mismo usuario)
Línea 5816: Línea 5816:
 
valid, i.e. only the last SMS will allow the user to complete the authentication process.
 
valid, i.e. only the last SMS will allow the user to complete the authentication process.
  
−
==== ENDPOINT ====
+
=== ENDPOINT ===
 
https://api.gateway360.com/api/2fa/request
 
https://api.gateway360.com/api/2fa/request
  
−
==== REQUEST ====
+
=== REQUEST ===
−
[[Archivo:test.jpg]]
+
 
 +
==== Parameters ====
 +
 
 +
{|class=wikitable
 +
|style="color:#fe0000;"|api_key
 +
|Your API Key.
 +
|-
 +
|style="color:#fe0000;"|msisdn
 +
|Mobile number to verify in international format (must include country calling code).
 +
|-
 +
|style="color:#fe0000;"|sender
 +
|Sender field for the SMS (max 15 numeric or 11 alphanumeric characters).
 +
|-
 +
|style="color:#fe0000;"|hlr_lookup
 +
|Perform a HLR lookup to guarantee the validity of the MSISDN provided. Use this parameter to avoid the SMS being sent to invalid numbers. If set to 1 the operation will fail if the HLR query fails. Possible values 1 or 0. Defaults to 1.
 +
|-
 +
|sms_text
 +
|Text for the SMS. If specified, it must contain the placeholder string {PIN} exactly once, to be replaced by the generated PIN code. Max SMS length is 160 characters minus the length of the PIN code.
 +
|-
 +
|report_url
 +
|Callback url to receive the SMS delivery report (DLR). For details on the format of this dlr, see Get Reports (Callback). Note that this delivery report only contains the status of the SMS sent to the user, not the actual verification process.
 +
|-
 +
|pin_params
 +
|
 +
{|class=wikitable
 +
|type
 +
|Type of characters for the generated PIN code. Allowed values are numeric, alpha and alphanumeric. Letters will always be uppercase. Defaults to numeric.
 +
|-
 +
|length
 +
|Length of the generated PIN code. Between 4 and 16. Defaults to 6.
 +
|-
 +
|expires_in
 +
|Seconds until the PIN code expires and is rendered invalid. 0 for unlimited validity (not recommended). Defaults to 3600 (1 hour).
 +
|-
 +
|max_tries
 +
|Maximum number of failed confirmation attempts before the code is rendered invalid permanently. 0 for unlimited retries (not recommended). Defaults to 3.
 +
|}
 +
|}
  
 
==== JSON ====
 
==== JSON ====
−
[[Archivo:test.jpg]]
+
 
 +
<pre>
 +
{
 +
    "api_key":"399d2b438a53ebed3db8a7d52107f846",
 +
    "msisdn":"34666666111",
 +
    "sender":"GOOD PIZZA",
 +
    "hlr_lookup":1
 +
}
 +
</pre>
  
 
==== PHP ====
 
==== PHP ====
 +
 +
<pre>
 +
$request = '{
 +
    "api_key":"399d2b438a53ebed3db8a7d52107f846",
 +
    "msisdn":"34666666111",
 +
    "sender":"GOOD PIZZA",
 +
    "hlr_lookup":1
 +
}';
 +
       
 +
$headers = array('Content-Type: application/json');       
 +
 +
$ch = curl_init('https://api.gateway360.com/api/2fa/request');
 +
curl_setopt($ch, CURLOPT_POST, 1);
 +
curl_setopt($ch, CURLOPT_RETURNTRANSFER,true);
 +
curl_setopt($ch, CURLOPT_HTTPHEADER, $headers);
 +
curl_setopt($ch, CURLOPT_POSTFIELDS, $request);
 +
 +
$result = curl_exec($ch);
 +
 +
if (curl_errno($ch) != 0 ){
 +
die("curl error: ".curl_errno($ch));
 +
}       
 +
</pre>
 +
 +
==== Java ====
 +
 +
<pre>
 +
/** Imports */
 +
import org.apache.http.HttpResponse;
 +
import org.apache.http.client.HttpClient;
 +
import org.apache.http.client.methods.HttpPost;
 +
import org.apache.http.entity.StringEntity;
 +
import org.apache.http.impl.client.HttpClientBuilder;
 +
/** End imports */
 +
 +
 +
HttpClient httpClient = HttpClientBuilder.create().build();
 +
HttpPost request = new HttpPost("https://api.gateway360.com/api/2fa/request");
 +
 +
StringEntity params = new StringEntity(
 +
"{" +
 +
"    \"api_key\":\"399d2b438a53ebed3db8a7d52107f846\"," +
 +
"    \"msisdn\":\"34666666111\"," +
 +
"    \"sender\":\"GOOD PIZZA\"," +
 +
"    \"hlr_lookup\":1" +
 +
"}");
 +
 +
request.addHeader("content-type", "application/json");
 +
request.addHeader("Accept","application/json");
 +
request.setEntity(params);
 +
HttpResponse response = httpClient.execute(request);
 +
.asString();
 +
</pre>
 +
 +
=== RESPONSE ===
 +
 +
==== Parameters ====
 +
 +
{|class=wikitable
 +
|status
 +
|Final status of request - either "ok" or "error"
 +
|-
 +
|error_id
 +
|In case of status being "error", this will indicate the error code.
 +
|-
 +
|error_msg
 +
|In case of status being "error", this param will contain additional information. Should only be used for debugging.
 +
|-
 +
|}
 +
 +
==== Example 1 ====
 +
 +
===== 200 OK =====
 +
<pre>
 +
{
 +
    "status":"ok"
 +
}
 +
</pre>
 +
:''Two messages successfully processed''
 +
 +
==== Example 2 ====
 +
 +
===== 200 OK =====
 +
<pre>
 +
{
 +
    "status":"error",
 +
    "error_id":"INVALID_NUMBER",
 +
    "error_msg":"HLR query returned error."
 +
}
 +
 +
</pre>
 +
:''We didn't continue processing your request because the MSISDN wasn't valid.''
 +
 +
==== Example 3 ====
 +
 +
===== 401 Unauthorized =====
 +
<pre>
 +
{
 +
    "status":"error",
 +
    "error_id":"UNAUTHORIZED",
 +
    "error_msg":"Your API key may be invalid or your IP is blocked."
 +
}
 +
</pre>
 +
:''We didn't continue processing your request because your API Key wasn't valid.''
 +
 +
==== Example 3 ====
 +
 +
===== 400 Bad Request =====
 +
<pre>
 +
{
 +
    "status":"error",
 +
    "error_id":"JSON_PARSE_ERROR",
 +
    "error_msg":"Your JSON was formatted incorrectly."
 +
}
 +
</pre>
 +
:''We couldn't process your request.''
  
 
==== ERRORS ====
 
==== ERRORS ====
−
Error ID Explanation
+
 
−
INVALID_CONTENT_TYPE The content type must be: Content-Type: application/json
+
{|class=wikitable
−
JSON_PARSE_ERROR Your JSON was formatted incorrectly or was considered otherwise
+
|Error ID Explanation
−
improper or incomplete. Check it here.
+
|-
−
MISSING_PARAMS Your request is incomplete and missing some mandatory parameters.
+
|INVALID_CONTENT_TYPE
−
BAD_PARAMS One or more of your parameters has incorrect format or value.
+
|The content type must be: Content-Type: application/json
−
UNAUTHORIZED Your API key may be invalid, double-check that your API key was input
+
|-
−
correctly or see if the IP is blocked in your account API settings.
+
|JSON_PARSE_ERROR
−
INVALID_HLR_LOOKUP_PARAM Invalid hlr_lookup param provided.
+
|Your JSON was formatted incorrectly or was considered otherwise improper or incomplete. Check it here.
−
INVALID_PIN_PARAMS Invalid pin configuration parameters provided.
+
|-
−
INVALID_SMS_TEXT The SMS text was deemed invalid. Either too long or mising the {PIN}
+
|MISSING_PARAMS
−
placeholder.
+
|Your request is incomplete and missing some mandatory parameters.
−
FACTOR AUTHENTICATION FLOW 97
+
|-
−
INVALID_SENDER
+
|BAD_PARAMS
−
The sender address (from parameter) was not allowed for this
+
|One or more of your parameters has incorrect format or value.
−
message.
+
|-
−
INVALID_NUMBER HLR query returned error. The number must be in MSISDN
+
|UNAUTHORIZED
−
format. Check format here.
+
|Your API key may be invalid, double-check that your API key was input correctly or see if the IP is blocked in your account API settings.
−
NOT_ENOUGH_BALANCE
+
|-
−
Your account has no funds to process this request, add credits to your
+
|INVALID_HLR_LOOKUP_PARAM
−
account and try again.
+
|Invalid hlr_lookup param provided.
−
UNKNOWN_ERROR The system threw an unknown error.
+
|-
 +
|INVALID_PIN_PARAMS
 +
|Invalid pin configuration parameters provided.
 +
|-
 +
|INVALID_SMS_TEXT
 +
|The SMS text was deemed invalid. Either too long or mising the {PIN} placeholder.
 +
|-
 +
|INVALID_SENDER
 +
|The sender address (from parameter) was not allowed for this message.
 +
|-
 +
|INVALID_NUMBER
 +
|HLR query returned error. The number must be in MSISDN format. Check format here.
 +
|-
 +
|NOT_ENOUGH_BALANCE
 +
|Your account has no funds to process this request, add credits to your account and try again.
 +
|-
 +
|UNKNOWN_ERROR
 +
|The system threw an unknown error.
 +
|-
 +
|}
  
 
=== VERIFY PIN ===
 
=== VERIFY PIN ===
  
−
Use this method to verify the PIN code provided by a user. Submit the number (msisdn) along
+
Use this method to verify the PIN code provided by a user. Submit the number (msisdn) along the PIN code that was previously delivered to them via SMS with the 'Request' method to verify against our records.
−
the PIN code that was previously delivered to them via SMS with the 'Request' method to
+
 
−
verify against our records.
+
In order for verification to succeed, you must provide a valid MSISDN-PIN pair that has not expired nor exhausted its allowed maximum validation attempts, as per the settings specified with the 'Request' method.
−
In order for verification to succeed, you must provide a valid MSISDN-PIN pair that has not
+
 
−
expired nor exhausted its allowed maximum validation attempts, as per the settings specified
+
If verification fails a number of times greater than was specified with the max_tries setting (3 by default), the PIN code will be rendered invalid
−
with the 'Request' method.
+
 
−
If verification fails a number of times greater than was specified with the max_tries setting (3
+
==== ENDPOINT ====
−
by default), the PIN code wil be rendered invalid
+
 
 +
[https://api.gateway360.com/api/2fa/verify https://api.gateway360.com/api/2fa/verify]
 +
 
 +
==== REQUEST ====
 +
 
 +
===== Parameters =====
 +
 
 +
{|class=wikitable
 +
|style="color:#fe0000;"|api_key
 +
|Your API Key.
 +
|-
 +
|style="color:#fe0000;"|msisdn
 +
|A mobile number that has previously requested verification.
 +
|-
 +
|style="color:#fe0000;"|pin
 +
|The verification pin received by the user.
 +
|}
 +
 
 +
===== JSON =====
 +
 
 +
<pre>
 +
{
 +
    "api_key":"399d2b438a53ebed3db8a7d52107f846",
 +
    "msisdn":"34666666111",
 +
    "pin":"581365"
 +
}
 +
</pre>
 +
===== PHP =====
 +
 
 +
<pre>
 +
$request = '{
 +
    "api_key":"399d2b438a53ebed3db8a7d52107f846",
 +
    "msisdn":"34666666111",
 +
    "pin":"581365"
 +
}';
 +
       
 +
$headers = array('Content-Type: application/json');       
 +
 
 +
$ch = curl_init('https://api.gateway360.com/api/2fa/verify');
 +
curl_setopt($ch, CURLOPT_POST, 1);
 +
curl_setopt($ch, CURLOPT_RETURNTRANSFER,true);
 +
curl_setopt($ch, CURLOPT_HTTPHEADER, $headers);
 +
curl_setopt($ch, CURLOPT_POSTFIELDS, $request);
 +
 
 +
$result = curl_exec($ch);
 +
 +
if (curl_errno($ch) != 0 ){
 +
die("curl error: ".curl_errno($ch));
 +
}     
 +
</pre>
 +
 
 +
===== Java =====
 +
 
 +
<pre>
 +
/** Imports */
 +
import org.apache.http.HttpResponse;
 +
import org.apache.http.client.HttpClient;
 +
import org.apache.http.client.methods.HttpPost;
 +
import org.apache.http.entity.StringEntity;
 +
import org.apache.http.impl.client.HttpClientBuilder;
 +
/** End imports */
 +
 
 +
 
 +
HttpClient httpClient = HttpClientBuilder.create().build();
 +
HttpPost request = new HttpPost("https://api.gateway360.com/api/2fa/verify");
 +
 
 +
StringEntity params = new StringEntity(
 +
"{" +
 +
"    \"api_key\":\"399d2b438a53ebed3db8a7d52107f846\"," +
 +
"    \"msisdn\":\"34666666111\"," +
 +
"    \"pin\":\"581365\"" +
 +
"}");
 +
 
 +
request.addHeader("content-type", "application/json");
 +
request.addHeader("Accept","application/json");
 +
request.setEntity(params);
 +
HttpResponse response = httpClient.execute(request);
 +
</pre>
 +
:''.asString();''
 +
 
 +
==== RESPONSE ====
 +
 
 +
[https://panel.smspubli.com/api/3.0/docs/2factor/verify#parameters-response Parameters]
 +
 
 +
{| class="wikitable"
 +
|-
 +
| style="font-weight:bold;" | status
 +
| colspan="2" | Final request status - either "ok" or "error"
 +
|-
 +
| rowspan="5" style="text-align:center; font-weight:bold;" | result
 +
| colspan="2" | In case of status being "ok", result will contain details about the operation
 +
|-
 +
| style="text-align:center; font-weight:bold;" | verified
 +
| true or false
 +
|-
 +
| style="text-align:center; vertical-align:middle; font-weight:bold; background-color:#FFF; color:#5D5C5E;" | previously_verified
 +
| Only if verified is true. Indicates whether the PIN has already been verified at least once
 +
|-
 +
| style="text-align:center; font-weight:bold;" | tries_remaining
 +
| Only if verified is false and the max_tries setting is not 0. Indicates the number of attempts remaining to verify the specified msisdn.
 +
|-
 +
| style="text-align:center; font-weight:bold;" | message
 +
| A human readable message explaining the obtained result.
 +
|-
 +
| style="font-weight:bold;" | error_id
 +
| colspan="2" | In case of status being "error", this param will contain the error id.
 +
|-
 +
| style="font-weight:bold; background-color:#FFF; color:#5D5C5E;" | error_msg
 +
| colspan="2" | In case of status being "error", this param will contain additional information. Should only be used for debugging
 +
|}
 +
 
 +
[https://panel.smspubli.com/api/3.0/docs/2factor/verify#parameters-response Examples]
 +
 
 +
200 OK
 +
 
 +
<pre>
 +
{
 +
" status ": "ok" ,
 +
" result ":
 +
{
 +
"verified":true,
 +
"previously_verified":false,
 +
"message":"PIN code verified."
 +
}
 +
}
 +
</pre>
 +
 
 +
User successfully verified
 +
 
 +
200 OK
 +
 
 +
<pre>
 +
{
 +
" status ": "ok" ,
 +
" result ":
 +
{
 +
"verified":false,
 +
"tries_remaining":2,
 +
"message":"Invalid PIN code."
 +
}
 +
}
 +
</pre>
 +
 
 +
Unsuccesful verification. 2 Tries remaining.
 +
 
 +
401 Unauthorized
 +
 
 +
<pre>
 +
{
 +
" status ": "error" ,
 +
" error_id ": "UNAUTHORIZED" ,
 +
" error_msg ": "Your API key may be invalid or your IP is blocked."
 +
}
 +
</pre>
 +
 
 +
We didn't continue processing your request because your API Key wasn't valid.
 +
 
 +
400 Bad Request
 +
 
 +
<pre>
 +
{
 +
" status ": "error" ,
 +
" error_id ": "INVALID_CONTENT_TYPE" ,
 +
" error_msg ": "Invalid Content-Type; must be application/json."
 +
}
 +
</pre>
 +
 
 +
We couldn't process your request.
 +
 
 +
==== ERRORS ====
 +
 
 +
{| class="wikitable" style="font-weight:bold;"
 +
|- style="font-weight:normal;"
 +
! Error ID
 +
! Explanation
 +
|-
 +
| INVALID_CONTENT_TYPE
 +
| style="font-weight:normal;" | The content type must be: Content-Type: application/json
 +
|-
 +
| JSON_PARSE_ERROR
 +
| style="font-weight:normal;" | https://jsonlint.com/
 +
|-
 +
| MISSING_PARAMS
 +
| style="font-weight:normal;" | Your request is incomplete and missing some mandatory parameters.
 +
|-
 +
| BAD_PARAMS
 +
| style="font-weight:normal;" | One or more of your parameters has incorrect format or value.
 +
|-
 +
| UNAUTHORIZED
 +
| style="font-weight:normal;" | Your API key may be invalid, double-check that your API key was input correctly or see if the IP is blocked in your account API settings.
 +
|-
 +
| RECORD_NOT_FOUND
 +
| style="font-weight:normal;" | No valid record found for the specified MSISDN-PIN pair.
 +
|-
 +
| NOT_VERIFIED
 +
| style="font-weight:normal;" | The verification pin is invalid.
 +
|}
 +
 
 +
== ACCOUNT ==
 +
 
 +
=== GET BALANCE ===
 +
 
 +
Check your account balance or a subaccount balance.
 +
 
 +
==== ENDPOINT ====
 +
 
 +
[https://api.gateway360.com/api/3.0/account/get-balance https://api.gateway360.com/api/3.0/account/get-balance]
 +
 
 +
==== REQUEST ====
 +
 
 +
[https://panel.smspubli.com/api/3.0/docs/account/get-balance#parameters-request PARAMETERS]
 +
{| class="wikitable"
 +
|-
 +
| api_key
 +
| Your API Key
 +
|}
 +
 
 +
[https://panel.smspubli.com/api/3.0/docs/account/get-balance#example-request-json JSON]
 +
 
 +
<pre>
 +
{
 +
" api_key ": "399d2b438a53ebed3db8a7d52107f846"
 +
}
 +
</pre>
 +
 
 +
[https://panel.smspubli.com/api/3.0/docs/account/get-balance#example-request-php PHP]
 +
 
 +
<pre>
 +
$request = '{
 +
"api_key":"399d2b438a53ebed3db8a7d52107f846"
 +
}' ;
 +
$headers = array( 'Content-Type: application/json' );
 +
$ch = curl_init( 'https://api.gateway360.com/api/3.0/account/get-balance' );
 +
curl_ setopt ( $ch , CURLOPT_POST, 1 );
 +
curl_ setopt ( $ch , CURLOPT_RETURNTRANSFER, true );
 +
curl_ setopt ( $ch , CURLOPT_HTTPHEADER, $headers );
 +
curl_ setopt ( $ch , CURLOPT_POSTFIELDS, $request );
 +
$result = curl_ exec ( $ch );
 +
if ( !curl_errno( $ch ) )
 +
$result = json_decode( $result );
 +
else
 +
$result = curl_error( $ch );
 +
 
 +
print _r( $result );
 +
</pre>
 +
 
 +
[https://panel.smspubli.com/api/3.0/docs/account/get-balance#example-request-java JAVA]
 +
 
 +
<pre>
 +
/** Imports */
 +
import org.apache.http.HttpResponse;
 +
import org.apache.http.client.HttpClient;
 +
import org.apache.http.client.methods.HttpPost;
 +
import org.apache.http.entity.StringEntity;
 +
import org.apache.http.impl.client.HttpClientBuilder;
 +
/** End imports */
 +
HttpClient httpClient = HttpClientBuilder.create().build();
 +
HttpPost request = new HttpPost( "https://api.gateway360.com/api/3.0/account/ge
 +
t-balance" );
 +
StringEntity params = new StringEntity(
 +
"{" +
 +
" \"api_key\":\"399d2b438a53ebed3db8a7d52107f846\"" +
 +
"}" );
 +
request.addHeader( "content-type" , "application/json" );
 +
request.addHeader( "Accept" , "application/json" );
 +
request.setEntity(params);
 +
HttpResponse response = httpClient.execute(request);
 +
</pre>
 +
 
 +
==== RESPONSE ====
 +
 
 +
[https://panel.smspubli.com/api/3.0/docs/account/get-balance#parameters-response PARAMETERS]
 +
 
 +
{| class="wikitable"
 +
|-
 +
| style="font-weight:bold;" | status
 +
| colspan="2" | The sending status of request - either "ok", "error"
 +
|-
 +
| rowspan="3" style="text-align:center; font-weight:bold;" | result
 +
| colspan="2" | Object with the result.
 +
|-
 +
| style="font-weight:bold;" | balance
 +
| The balance amount of your account, not that it's with 4 decimals, Ex: 155.2493
 +
|-
 +
| style="font-weight:bold;" | currency
 +
| Either EUR, USD, GBP, CREDITS, SMS, ...
 +
|-
 +
| style="font-weight:bold;" | error_id
 +
| colspan="2" | In case the status values "error" we will indicate you here the error id.
 +
|-
 +
| style="font-weight:bold;" | error_msg
 +
| colspan="2" | In case the status values "error" this param has additional information. This param should be use just for debugging.
 +
|}
 +
 
 +
[https://panel.smspubli.com/api/3.0/docs/account/get-balance#example-response-1 EXAMPLE 1]
 +
 
 +
200 OK
 +
<pre>
 +
{
 +
" status ": "ok" ,
 +
" result ": {
 +
"balance":"350.1234",
 +
"currency":"EUR"
 +
}
 +
}
 +
</pre>
 +
Your account has 350,12 €
 +
 
 +
==== ERRORS ====
 +
 
 +
{| class="wikitable"
 +
|-
 +
| Error ID
 +
| Explanation
 +
|-
 +
| INVALID_CONTENT_TYPE
 +
| The content type must be: Content-Type: application/json
 +
|-
 +
| JSON_PARSE_ERROR
 +
| Your JSON was formatted incorrectly or was considered otherwise improper or incomplete. https://jsonlint.com/
 +
|-
 +
| MISSING_PARAMS
 +
| Your request is incomplete and missing some mandatory parameters
 +
|-
 +
| UNAUTHORIZED
 +
| Your API key may be invalid, double-check that your API key was input correctly or see if your current IP is blocked in your account API settings.
 +
|}
 +
 
 +
=== GET PRICING ===
 +
 
 +
Check your account pricing
 +
 
 +
==== Pricing for a given country ====
 +
 
 +
===== ENDPOINT =====
 +
 
 +
[https://api.gateway360.com/api/3.0/account/pricing/sms/get-country-pricing https://api.gateway360.com/api/3.0/account/pricing/sms/get-country-pricing]
 +
 
 +
===== REQUEST =====
 +
 
 +
[https://panel.smspubli.com/api/3.0/docs/account/get-pricing#parameters-request PARAMETERS]
 +
 
 +
{| class="wikitable" style="font-weight:bold;"
 +
|-
 +
| style="background-color:#FFF; color:#E85C42;" | api_key
 +
| style="font-weight:normal;" | Your API Key.
 +
|-
 +
| country_code
 +
| style="font-weight:normal;" | A country in ISO alpha2 format. If the parameter isn't passed, all countries will be returned
 +
|- style="font-weight:normal;"
 +
| style="background-color:#fe0000;" |
 +
| Mandatory
 +
|- style="font-weight:normal;"
 +
| style="background-color:#000000;" |
 +
| Optional
 +
|}
 +
 
 +
[https://panel.smspubli.com/api/3.0/docs/account/get-pricing#example-request-json JSON]
 +
 
 +
<pre>
 +
{
 +
" api_key ": "399d2b438a53ebed3db8a7d52107f846" ,
 +
" country_code ": "ES" ,
 +
}
 +
</pre>
 +
 
 +
[https://panel.smspubli.com/api/3.0/docs/account/get-pricing#example-request-php PHP]
 +
 
 +
<pre>
 +
$request = '{
 +
"api_key":"399d2b438a53ebed3db8a7d52107f846",
 +
"country_code":"ES",
 +
}' ;
 +
$headers = array( 'Content-Type: application/json' );
 +
$ch = curl_init( 'https://api.gateway360.com/api/3.0/account/pricing/sms/get-cou
 +
ntry-pricing' );
 +
curl_ setopt ( $ch , CURLOPT_POST, 1 );
 +
curl_ setopt ( $ch , CURLOPT_RETURNTRANSFER, true );
 +
curl_ setopt ( $ch , CURLOPT_HTTPHEADER, $headers );
 +
curl_ setopt ( $ch , CURLOPT_POSTFIELDS, $request );
 +
$result = curl_ exec ( $ch );
 +
if ( !curl_errno( $ch ) )
 +
$result = json_decode( $result );
 +
else
 +
$result = curl_error( $ch );
 +
 
 +
print _r( $result );
 +
</pre>
 +
 
 +
[https://panel.smspubli.com/api/3.0/docs/account/get-pricing#example-request-java JAVA]
 +
 
 +
<pre>
 +
/** Imports */
 +
import org.apache.http.HttpResponse;
 +
import org.apache.http.client.HttpClient;
 +
import org.apache.http.client.methods.HttpPost;
 +
import org.apache.http.entity.StringEntity;
 +
import org.apache.http.impl.client.HttpClientBuilder;
 +
/** End imports */
 +
HttpClient httpClient = HttpClientBuilder.create().build();
 +
HttpPost request = new HttpPost( "https://api.gateway360.com/api/3.0/account/ge
 +
t-balance" );
 +
StringEntity params = new StringEntity(
 +
"{" +
 +
" \"api_key\":\"399d2b438a53ebed3db8a7d52107f846\"" +
 +
" \"country_code\":\"ES\"" +
 +
"}" );
 +
request.addHeader( "content-type" , "application/json" );
 +
request.addHeader( "Accept" , "application/json" );
 +
request.setEntity(params);
 +
HttpResponse response = httpClient.execute(request);
 +
</pre>
 +
 
 +
===== RESPONSE =====
 +
 
 +
[https://panel.smspubli.com/api/3.0/docs/account/get-pricing#parameters-response PARAMETERS]
 +
 
 +
{| class="wikitable" style="font-weight:bold;"
 +
|-
 +
| status
 +
| style="font-weight:normal;" | Status of request - either "ok" or "error"
 +
|-
 +
| name
 +
| style="font-weight:normal;" | Name of the country.
 +
|-
 +
| prefix
 +
| style="font-weight:normal;" | Prefix for that country.
 +
|-
 +
| networks
 +
| style="font-weight:normal;" | Available networks for that country.
 +
|-
 +
| code
 +
| style="font-weight:normal;" | Mobile Country Code (first 3 characters) and Mobile Network Code.
 +
|-
 +
| network
 +
| style="font-weight:normal;" | Specific network.
 +
|-
 +
| price
 +
| style="font-weight:normal;" | Price for that network.
 +
|-
 +
| error_id
 +
| style="font-weight:normal;" | In case of status being "error", this param will contain the error id.
 +
|-
 +
| error_msg
 +
| style="font-weight:normal;" | In case of status being "error", this param will contain additional information. Should only be used for debugging.
 +
|}
 +
 
 +
[https://panel.smspubli.com/api/3.0/docs/account/get-pricing#example-response-1 EXAMPLE]
 +
 
 +
200 OK
 +
 
 +
<pre>
 +
{
 +
" status ": "ok" ,
 +
" result ": {
 +
"ES":{
 +
"name":"Spain",
 +
"prefix":"34",
 +
"networks":{
 +
"0":{
 +
"code":"21401",
 +
"network":"MNO - Vodafone Espana",
 +
"price":"0.0520"
 +
},
 +
"1":{
 +
"code":"21403",
 +
"network":"MNO - Orange Espana",
 +
"price":"0.0520"
 +
},
 +
"2":{
 +
"code":"21407",
 +
"network":"MNO - Movistar (Telefonica Moviles Esp
 +
ana)",
 +
"price":"0.0520"
 +
},
 +
"3":{
 +
"code":"21404",
 +
"network":"MNO - Yoigo (Xfera Moviles)",
 +
"price":"0.0520"
 +
}
 +
}
 +
}
 +
}
 +
}
 +
</pre>
 +
 
 +
===== ERRORS =====
 +
 
 +
{| class="wikitable"
 +
|-
 +
| Error ID
 +
| Explanation
 +
|-
 +
| INVALID_CONTENT_TYPE
 +
| The content type must be: Content-Type: application/json
 +
|-
 +
| JSON_PARSE_ERROR
 +
| Your JSON was formatted incorrectly or was considered otherwise improper or incomplete. https://jsonlint.com/
 +
|-
 +
| MISSING_PARAMS
 +
| Your request is incomplete and missing some mandatory parameters.
 +
|-
 +
| UNAUTHORIZED
 +
| Your API key may be invalid, double-check that your API key was input correctly or see if your current IP is blocked in your account API settings.
 +
|}
 +
 
 +
=== Pricing for a given prefix ===
 +
 
 +
==== ENDPOINT ====
 +
 
 +
[https://api.gateway360.com/api/3.0/account/pricing/sms/get-prefix-pricing  https://api.gateway360.com/api/3.0/account/pricing/sms/get-prefix-pricing]
 +
 
 +
==== REQUEST ====
 +
 
 +
[https://panel.smspubli.com/api/3.0/docs/account/get-pricing#example-request-json-prefix JSON]
 +
 
 +
<pre>
 +
{
 +
" api_key ": "399d2b438a53ebed3db8a7d52107f846" ,
 +
" prefix ": "34" ,
 +
}
 +
</pre>
 +
 
 +
[https://panel.smspubli.com/api/3.0/docs/account/get-pricing#example-request-php-prefix PHP]
 +
 
 +
<pre>
 +
$request = '{
 +
"api_key":"399d2b438a53ebed3db8a7d52107f846",
 +
"prefix":"34",
 +
}' ;
 +
$headers = array( 'Content-Type: application/json' );
 +
$ch = curl_init( 'https://api.gateway360.com/api/3.0/account/pricing/sms/get-pre
 +
fix-pricing' );
 +
curl_ setopt ( $ch , CURLOPT_POST, 1 );
 +
curl_ setopt ( $ch , CURLOPT_RETURNTRANSFER, true );
 +
curl_ setopt ( $ch , CURLOPT_HTTPHEADER, $headers );
 +
curl_ setopt ( $ch , CURLOPT_POSTFIELDS, $request );
 +
$result = curl_ exec ( $ch );
 +
if ( !curl_errno( $ch ) )
 +
$result = json_decode( $result );
 +
else
 +
$result = curl_error( $ch );
 +
print _r( $result );
 +
</pre>
 +
 
 +
[https://panel.smspubli.com/api/3.0/docs/account/get-pricing#example-request-java-prefix JAVA]
 +
 
 +
<pre>
 +
/** Imports */
 +
import org.apache.http.HttpResponse;
 +
import org.apache.http.client.HttpClient;
 +
import org.apache.http.client.methods.HttpPost;
 +
import org.apache.http.entity.StringEntity;
 +
import org.apache.http.impl.client.HttpClientBuilder;
 +
/** End imports */
 +
HttpClient httpClient = HttpClientBuilder.create().build();
 +
HttpPost request = new HttpPost( "https://api.gateway360.com/api/3.0/account/ge
 +
t-balance" );
 +
StringEntity params = new StringEntity(
 +
"{" +
 +
" \"api_key\":\"399d2b438a53ebed3db8a7d52107f846\"" +
 +
" \"prefix\":\"34\"" +
 +
"}" );
 +
request.addHeader( "content-type" , "application/json" );
 +
request.addHeader( "Accept" , "application/json" );
 +
request.setEntity(params);
 +
HttpResponse response = httpClient.execute(request);
 +
</pre>
 +
 
 +
==== RESPONSE ====
 +
 
 +
[https://panel.smspubli.com/api/3.0/docs/account/get-pricing#parameters-response-prefix RESPONSE]
 +
 
 +
{| class="wikitable"
 +
|-
 +
| status
 +
| Status of request - either "ok" or "error"
 +
|-
 +
| name
 +
| Name of the country.
 +
|-
 +
| prefix
 +
| Prefix for that country
 +
|-
 +
| networks
 +
| Available networks for that country
 +
|-
 +
| code
 +
| Mobile Country Code (first 3 characters) and Mobile Network Code.
 +
|-
 +
| network
 +
| Specific network.
 +
|-
 +
| price
 +
| Price for that network.
 +
|-
 +
| error_id
 +
| In case of status being "error", this param will contain the error id
 +
|-
 +
| error_msg
 +
| In case of status being "error", this param will contain additional information. Should only be used for debugging.
 +
|}
 +
 
 +
[https://panel.smspubli.com/api/3.0/docs/account/get-pricing#example-response-1-prefix EXAMPLE]
 +
 
 +
200 OK
 +
 
 +
<pre>
 +
{
 +
" status ": "ok" ,
 +
" result ": {
 +
"ES":{
 +
"name":"Spain",
 +
"prefix":"34",
 +
"networks":{
 +
"0":{
 +
"code":"21401",
 +
"network":"MNO - Vodafone Espana",
 +
"price":"0.0520"
 +
},
 +
"1":{
 +
"code":"21403",
 +
"network":"MNO - Orange Espana",
 +
"price":"0.0520"
 +
},
 +
"2":{
 +
"code":"21407",
 +
"network":"MNO - Movistar (Telefonica Moviles Esp
 +
ana)",
 +
"price":"0.0520"
 +
},
 +
"3":{
 +
"code":"21404",
 +
"network":"MNO - Yoigo (Xfera Moviles)",
 +
"price":"0.0520"
 +
}
 +
}
 +
}
 +
}
 +
}
 +
</pre>
 +
 
 +
==== ERRORS ====
 +
 
 +
{| class="wikitable"
 +
|-
 +
! Error ID
 +
! Explanation
 +
|-
 +
| INVALID_CONTENT_TYPE
 +
| The content type must be: Content-Type: application/json
 +
|-
 +
| JSON_PARSE_ERROR
 +
| Your JSON was formatted incorrectly or was considered otherwise improper or incomplete. https://jsonlint.com/
 +
|-
 +
| MISSING_PARAMS
 +
| Your request is incomplete and missing some mandatory parameters
 +
|-
 +
| UNAUTHORIZED
 +
| Your API key may be invalid, double-check that your API key was input correctly or see if your current IP is blocked in your account API settings.
 +
|}
 +
 
 +
 
 +
== SUBACCOUNT ==
 +
 
 +
=== GET BALANCE ===
 +
 
 +
Check your subaccount balance.
 +
 
 +
 
 +
==== ENDPOINT ====
 +
 
 +
[https://api.gateway360.com/api/3.0/subaccount/get-balance https://api.gateway360.com/api/3.0/subaccount/get-balance]
 +
 
 +
 
 +
==== REQUEST ====
 +
 
 +
===== Parameters =====
 +
 
 +
{|class=wikitable
 +
|api_key
 +
|Parent account API Key.
 +
|-
 +
|user_name
 +
|Username of a subaccount.
 +
 
 +
|}
 +
 
 +
===== JSON =====
 +
 
 +
<pre>
 +
{
 +
    "api_key":"399d2b438a53ebed3db8a7d52107f846",
 +
    "user_name":"subaccount_user_name"
 +
}
 +
</pre>
 +
 
 +
===== PHP =====
 +
 
 +
<pre>
 +
$request = '{
 +
    "api_key":"399d2b438a53ebed3db8a7d52107f846",
 +
    "user_name":"subaccount_user_name"
 +
}';
 +
 
 +
$headers = array('Content-Type: application/json');           
 +
 
 +
$ch = curl_init('https://api.gateway360.com/api/3.0/subaccount/get-balance');
 +
 
 +
curl_setopt($ch, CURLOPT_POST, 1);
 +
curl_setopt($ch, CURLOPT_RETURNTRANSFER,true);
 +
curl_setopt($ch, CURLOPT_HTTPHEADER, $headers);
 +
curl_setopt($ch, CURLOPT_POSTFIELDS, $request);
 +
 
 +
$result = curl_exec($ch);
 +
 
 +
if( !curl_errno($ch) )
 +
    $result = json_decode($result);
 +
else
 +
    $result = curl_error($ch);
 +
   
 +
print_r($result);
 +
</pre>
 +
 
 +
===== Java =====
 +
 
 +
<pre>
 +
/** Imports */
 +
import org.apache.http.HttpResponse;
 +
import org.apache.http.client.HttpClient;
 +
import org.apache.http.client.methods.HttpPost;
 +
import org.apache.http.entity.StringEntity;
 +
import org.apache.http.impl.client.HttpClientBuilder;
 +
/** End imports */
 +
 
 +
 
 +
HttpClient httpClient = HttpClientBuilder.create().build();
 +
HttpPost request = new HttpPost("https://api.gateway360.com/api/3.0/subaccount/get-balance");
 +
 
 +
StringEntity params = new StringEntity(
 +
"{" +
 +
"    \"api_key\":\"399d2b438a53ebed3db8a7d52107f846\"," +
 +
"    \"user_name\":\"subaccount_user_name\"" +
 +
"}");
 +
 
 +
request.addHeader("content-type", "application/json");
 +
request.addHeader("Accept","application/json");
 +
request.setEntity(params);
 +
HttpResponse response = httpClient.execute(request);
 +
</pre>
 +
 
 +
 
 +
==== RESPONSE ====
 +
 
 +
===== Parameters =====
 +
 
 +
{|class=wikitable
 +
|status
 +
|The sending status of request - either "ok", "error"
 +
|-
 +
|result
 +
|Object with the result.
 +
{|class=wikitable
 +
|balance
 +
|The balance amount of your subaccount, not that it's with 4 decimals, Ex: 155.2493
 +
|-
 +
|currency
 +
|Either EUR, USD, GBP, CREDITS, SMS, ...
 +
|}
 +
|-
 +
|error_id
 +
|In case the status values "error" we will indicate you here the error id.
 +
|-
 +
|error_msg
 +
|In case the status values "error" this param has additional information. This param should be use just for debugging.
 +
|}
 +
 
 +
===== Example 1 =====
 +
 
 +
''200 OK''
 +
<pre>
 +
{
 +
    "status":"ok",
 +
    "result":{
 +
        "balance":"350.1234",
 +
        "currency":"EUR"
 +
    }
 +
}
 +
</pre>
 +
:''Your subaccount has 350,12 €''
 +
 
 +
 
 +
==== ERRORS ====
 +
 
 +
{|
 +
|Error ID
 +
|Explanation
 +
|-
 +
|INVALID_CONTENT_TYPE
 +
|The content type must be: Content-Type: application/json
 +
|-
 +
|JSON_PARSE_ERROR
 +
|Your JSON was formatted incorrectly or was considered otherwise improper or incomplete. Check it here.
 +
|-
 +
|MISSING_PARAMS
 +
|Your request is incomplete and missing some mandatory parameters.
 +
|-
 +
|UNAUTHORIZED
 +
|Your API key may be invalid, double-check that your API key was input correctly or see if your current IP is blocked in your account API settings.
 +
|}
 +
 
 +
=== ADD BALANCE ===
 +
 
 +
Add balance to a subaccount.
 +
 
 +
 
 +
==== ENDPOINT ====
 +
 
 +
[https://api.gateway360.com/api/3.0/subaccount/add-balance https://api.gateway360.com/api/3.0/subaccount/add-balance]
 +
 
 +
==== REQUEST ====
 +
 
 +
===== Parameters =====
 +
 
 +
{|class=wikitable
 +
|api_key
 +
|Parent account API Key.
 +
|-
 +
|user_name
 +
|Username of a subaccount.
 +
|-
 +
|amount
 +
|Amount to add
 +
|}
 +
 
 +
===== JSON =====
 +
 
 +
<pre>
 +
{
 +
    "api_key":"399d2b438a53ebed3db8a7d52107f846",
 +
    "user_name":"subaccount_user_name",
 +
    "amount":"150",
 +
}
 +
</pre>
 +
 
 +
===== PHP =====
 +
 
 +
<pre>
 +
$request = '{
 +
    "api_key":"399d2b438a53ebed3db8a7d52107f846",
 +
    "user_name":"subaccount_user_name",
 +
    "amount":"150",
 +
}';
 +
 
 +
$headers = array('Content-Type: application/json');           
 +
 
 +
$ch = curl_init('https://api.gateway360.com/api/3.0/subaccount/add-balance');
 +
 
 +
curl_setopt($ch, CURLOPT_POST, 1);
 +
curl_setopt($ch, CURLOPT_RETURNTRANSFER,true);
 +
curl_setopt($ch, CURLOPT_HTTPHEADER, $headers);
 +
curl_setopt($ch, CURLOPT_POSTFIELDS, $request);
 +
 
 +
$result = curl_exec($ch);
 +
 
 +
if( !curl_errno($ch) )
 +
    $result = json_decode($result);
 +
else
 +
    $result = curl_error($ch);
 +
   
 +
print_r($result);
 +
</pre>
 +
 
 +
===== Java =====
 +
 
 +
<pre>
 +
/** Imports */
 +
import org.apache.http.HttpResponse;
 +
import org.apache.http.client.HttpClient;
 +
import org.apache.http.client.methods.HttpPost;
 +
import org.apache.http.entity.StringEntity;
 +
import org.apache.http.impl.client.HttpClientBuilder;
 +
/** End imports */
 +
 
 +
 
 +
HttpClient httpClient = HttpClientBuilder.create().build();
 +
HttpPost request = new HttpPost("https://api.gateway360.com/api/3.0/subaccount/add-balance");
 +
 
 +
StringEntity params = new StringEntity(
 +
"{" +
 +
"    \"api_key\":\"399d2b438a53ebed3db8a7d52107f846\"," +
 +
"    \"user_name\":\"subaccount_user_name\"," +
 +
"    \"amount\":\"150\"" +
 +
"}");
 +
 
 +
request.addHeader("content-type", "application/json");
 +
request.addHeader("Accept","application/json");
 +
request.setEntity(params);
 +
HttpResponse response = httpClient.execute(request);
 +
</pre>
 +
 
 +
 
 +
==== RESPONSE ====
 +
 
 +
===== Parameters =====
 +
 
 +
{|class=wikitable
 +
|status
 +
|The sending status of request - either "ok", "error"
 +
|-
 +
|result
 +
|Object with the result.
 +
{|class=wikitable
 +
|balance
 +
|The new balance amount of your subaccount, not that it's with 4 decimals, Ex: 155.2493
 +
|-
 +
|currency
 +
|Either EUR, USD, GBP, CREDITS, SMS, ...
 +
|}
 +
|-
 +
|error_id
 +
|In case the status values "error" we will indicate you here the error id.
 +
|-
 +
|error_msg
 +
|In case the status values "error" this param has additional information. This param should be use just for debugging.
 +
|}
 +
 
 +
===== Example 1 =====
 +
 
 +
''200 OK''
 +
<pre>
 +
{
 +
    "status":"ok",
 +
    "result":{
 +
        "balance":"350.1234",
 +
        "currency":"EUR"
 +
    }
 +
}
 +
</pre>
 +
:''Balance added. Your subaccount has now 350,12 €''
 +
 
 +
==== ERRORS ====
 +
 
 +
{|class=wikitable
 +
|Error ID
 +
|Explanation
 +
|-
 +
|INVALID_CONTENT_TYPE
 +
|The content type must be: Content-Type: application/json
 +
|-
 +
|JSON_PARSE_ERROR
 +
|Your JSON was formatted incorrectly or was considered otherwise improper or incomplete. [http://jsonlint.com/ Check it here].
 +
|-
 +
|MISSING_PARAMS
 +
|Your request is incomplete and missing some mandatory parameters.
 +
|-
 +
|INVALID_NAME
 +
|Your username may be invalid or doesn't exist.
 +
|-
 +
|INVALID_AMOUNT
 +
|The amount must be a positive number
 +
|-
 +
|UNAUTHORIZED
 +
|Your API key may be invalid, double-check that your API key was input correctly or see if your current IP is blocked in your account API settings.
 +
|}
 +
 
 +
 
 +
=== DEDUCT BALANCE ===
 +
 
 +
Deduct subaccount balance
 +
 
 +
 
 +
==== ENDPOINT ====
 +
 
 +
[https://api.gateway360.com/api/3.0/subaccount/deduct-balance https://api.gateway360.com/api/3.0/subaccount/deduct-balance]
 +
 
 +
 
 +
==== REQUEST ====
 +
 
 +
===== Parameters =====
 +
 
 +
{|class=wikitable
 +
|api_key
 +
|Parent account API Key.
 +
|-
 +
|user_name
 +
|Username of a subaccount.
 +
|-
 +
|amount
 +
|Amount to deduct
 +
|}
 +
 
 +
 
 +
===== JSON =====
 +
 
 +
<pre>
 +
{
 +
    "api_key":"399d2b438a53ebed3db8a7d52107f846",
 +
    "user_name":"subaccount_user_name",
 +
    "amount":"150",
 +
}
 +
</pre>
 +
 
 +
===== PHP =====
 +
 
 +
<pre>
 +
$request = '{
 +
    "api_key":"399d2b438a53ebed3db8a7d52107f846",
 +
    "user_name":"subaccount_user_name",
 +
    "amount":"150",
 +
}';
 +
 
 +
$headers = array('Content-Type: application/json');           
 +
 
 +
$ch = curl_init('https://api.gateway360.com/api/3.0/subaccount/deduct-balance');
 +
 
 +
curl_setopt($ch, CURLOPT_POST, 1);
 +
curl_setopt($ch, CURLOPT_RETURNTRANSFER,true);
 +
curl_setopt($ch, CURLOPT_HTTPHEADER, $headers);
 +
curl_setopt($ch, CURLOPT_POSTFIELDS, $request);
 +
 
 +
$result = curl_exec($ch);
 +
 
 +
if( !curl_errno($ch) )
 +
    $result = json_decode($result);
 +
else
 +
    $result = curl_error($ch);
 +
   
 +
print_r($result);
 +
</pre>
 +
 
 +
===== Java =====
 +
 
 +
<pre>
 +
/** Imports */
 +
import org.apache.http.HttpResponse;
 +
import org.apache.http.client.HttpClient;
 +
import org.apache.http.client.methods.HttpPost;
 +
import org.apache.http.entity.StringEntity;
 +
import org.apache.http.impl.client.HttpClientBuilder;
 +
/** End imports */
 +
 
 +
 
 +
HttpClient httpClient = HttpClientBuilder.create().build();
 +
HttpPost request = new HttpPost("https://api.gateway360.com/api/3.0/subaccount/deduct-balance");
 +
 
 +
StringEntity params = new StringEntity(
 +
"{" +
 +
"    \"api_key\":\"399d2b438a53ebed3db8a7d52107f846\"," +
 +
"    \"user_name\":\"subaccount_user_name\"," +
 +
"    \"amount\":\"150\"" +
 +
"}");
 +
 
 +
request.addHeader("content-type", "application/json");
 +
request.addHeader("Accept","application/json");
 +
request.setEntity(params);
 +
HttpResponse response = httpClient.execute(request);
 +
</pre>
 +
 
 +
 
 +
==== RESPONSE ====
 +
 
 +
===== Parameters =====
 +
 
 +
{|class=wikitable
 +
|status
 +
|The sending status of request - either "ok", "error"
 +
|-
 +
|result
 +
|Object with the result.
 +
{|class=wikitable
 +
|balance
 +
|The new balance amount of your subaccount, not that it's with 4 decimals, Ex: 155.2493
 +
|-
 +
|currency
 +
|Either EUR, USD, GBP, CREDITS, SMS, ...
 +
|}
 +
|-
 +
|error_id
 +
|In case the status values "error" we will indicate you here the error id.
 +
|-
 +
|error_msg
 +
|In case the status values "error" this param has additional information. This param should be use just for debugging.
 +
|}
 +
 
 +
===== Example 1 =====
 +
 
 +
''200 OK''
 +
<pre>
 +
{
 +
    "status":"ok",
 +
    "result":{
 +
        "balance":"350.1234",
 +
        "currency":"EUR"
 +
    }
 +
}
 +
</pre>
 +
:''Balance deducted. Your subaccount has now 350,12 €''
 +
 
 +
==== ERRORS ====
 +
 
 +
{|class=wikitable
 +
|Error ID
 +
|Explanation
 +
|-
 +
|INVALID_CONTENT_TYPE
 +
|The content type must be: Content-Type: application/json
 +
|-
 +
|JSON_PARSE_ERROR
 +
|Your JSON was formatted incorrectly or was considered otherwise improper or incomplete. [http://jsonlint.com/ Check it here].
 +
|-
 +
|MISSING_PARAMS
 +
|Your request is incomplete and missing some mandatory parameters.
 +
|-
 +
|INVALID_NAME
 +
|Your username may be invalid or doesn't exist.
 +
|-
 +
|INVALID_AMOUNT
 +
|The amount must be a positive number
 +
|-
 +
|UNAUTHORIZED
 +
|Your API key may be invalid, double-check that your API key was input correctly or see if your current IP is blocked in your account API settings.
 +
|}
 +
 
 +
 
 +
=== GET INFO ===
 +
 
 +
Check your subaccount info
 +
 
 +
==== ENDPOINT ====
 +
 
 +
[https://api.gateway360.com/api/3.0/subaccount/get-info https://api.gateway360.com/api/3.0/subaccount/get-info]
 +
 
 +
 
 +
==== REQUEST ====
 +
 
 +
===== Parameters =====
 +
 
 +
{|class=wikitable
 +
|api_key
 +
|Parent account API Key.
 +
|-
 +
|user_name
 +
|Username of a subaccount.
 +
|}
 +
 
 +
===== JSON =====
 +
 
 +
<pre>
 +
{
 +
    "api_key":"399d2b438a53ebed3db8a7d52107f846",
 +
    "user_name":"subaccount_user_name"
 +
}
 +
</pre>
 +
 
 +
===== PHP =====
 +
 
 +
<pre>
 +
$request = '{
 +
    "api_key":"399d2b438a53ebed3db8a7d52107f846",
 +
    "user_name":"subaccount_user_name"
 +
}';
 +
 
 +
$headers = array('Content-Type: application/json');           
 +
 
 +
$ch = curl_init('https://api.gateway360.com/api/3.0/subaccount/get-info');
 +
 
 +
curl_setopt($ch, CURLOPT_POST, 1);
 +
curl_setopt($ch, CURLOPT_RETURNTRANSFER,true);
 +
curl_setopt($ch, CURLOPT_HTTPHEADER, $headers);
 +
curl_setopt($ch, CURLOPT_POSTFIELDS, $request);
 +
 
 +
$result = curl_exec($ch);
 +
 
 +
if( !curl_errno($ch) )
 +
    $result = json_decode($result);
 +
else
 +
    $result = curl_error($ch);
 +
   
 +
print_r($result);
 +
</pre>
 +
 
 +
===== Java =====
 +
 
 +
<pre>
 +
/** Imports */
 +
import org.apache.http.HttpResponse;
 +
import org.apache.http.client.HttpClient;
 +
import org.apache.http.client.methods.HttpPost;
 +
import org.apache.http.entity.StringEntity;
 +
import org.apache.http.impl.client.HttpClientBuilder;
 +
/** End imports */
 +
 
 +
 
 +
HttpClient httpClient = HttpClientBuilder.create().build();
 +
HttpPost request = new HttpPost("https://api.gateway360.com/api/3.0/subaccount/get-info");
 +
 
 +
StringEntity params = new StringEntity(
 +
"{" +
 +
"    \"api_key\":\"399d2b438a53ebed3db8a7d52107f846\"," +
 +
"    \"user_name\":\"subaccount_user_name\"" +
 +
"}");
 +
 
 +
request.addHeader("content-type", "application/json");
 +
request.addHeader("Accept","application/json");
 +
request.setEntity(params);
 +
HttpResponse response = httpClient.execute(request);
 +
</pre>
 +
 
 +
 
 +
==== RESPONSE ====
 +
 
 +
===== Parameters =====
 +
 
 +
{|class=wikitable
 +
|status
 +
|The sending status of request - either "ok", "error"
 +
|-
 +
|result
 +
|Object with the result.
 +
{|class=wikitable
 +
|user_name
 +
|Subaccount username
 +
|-
 +
|email
 +
|Subaccount email
 +
|-
 +
|balance
 +
|The balance amount of your subaccount, not that it's with 4 decimals, Ex: 155.2493
 +
|-
 +
|currency
 +
|Either EUR, USD, GBP, CREDITS, SMS, ...
 +
|}
 +
|-
 +
|error_id
 +
|In case the status values "error" we will indicate you here the error id.
 +
|-
 +
|error_msg
 +
|In case the status values "error" this param has additional information. This param should be use just for debugging.
 +
|}
 +
 
 +
 
 +
===== Example 1 =====
 +
 
 +
''200 OK''
 +
<pre>
 +
{
 +
    "status":"ok",
 +
    "result":{
 +
"user_name":"subaccount_user_name",
 +
"email":"me@email.com",
 +
        "balance":"350.1234",
 +
        "currency":"EUR"
 +
    }
 +
}
 +
</pre>
 +
:''Your subaccount has 350,12 €''
 +
 
 +
 
 +
==== ERRORS ====
 +
 
 +
{|class=wikitable
 +
|Error ID
 +
|Explanation
 +
|-
 +
|INVALID_CONTENT_TYPE
 +
|The content type must be: Content-Type: application/json
 +
|-
 +
|JSON_PARSE_ERROR
 +
|Your JSON was formatted incorrectly or was considered otherwise improper or incomplete. [http://jsonlint.com/ Check it here.]
 +
|-
 +
|MISSING_PARAMS
 +
|Your request is incomplete and missing some mandatory parameters.
 +
|-
 +
|UNAUTHORIZED
 +
|Your API key may be invalid, double-check that your API key was input correctly or see if your current IP is blocked in your account API settings.
 +
|}

Revisión actual del 21:30 9 dic 2021

Contenido

GETTING STARTED

Welcome to API documentation. To integrate the API, you'll need some programming skills. If you’re ready to get started, read on.

JSON

For this version of our API we only support JSON. So instead of XML, HTTP POST parameters, or other serialization formats, all POST/PATCH requests require a valid JSON object for the body.

ENDPOINT

This is the URL you have to request where {app} is the application and {function} the function you want to call.

https://api.gateway360.com/api/3.0/{app}/{funcion}

AUTHENTICATION

Most api requests will require authentication of the user account. This is always done through the API key associated with your account. You can find your API Key details in your account.

ENCODING

All the parameters must be encoded and they must be in UTF-8.

CONTENT TYPE

When you submit a request it's really important to set Content-Type: application/json

ERROR HANDLING

Plan to encounter errors of varying degrees. From an invalid request to the rare outage, you'll see the errors appear as an HTTP Response code. 400-series errors (code 400-499) indicate a bad request. Do not retry without fixing this error first. 500-series errors (500-599) indicate a problem on our servers.

SEND SMS

With this method you can send bulk SMS easily. This method has been extremely optimized to send more than 500.000 SMS in less than one hour.

ENDPOINT

https://api.gateway360.com/api/3.0/sms/send

REQUEST

Parameters

api_key
 Your API Key. 
messages
 Array of messages you want to send. 
from
 Originator address (sender). Up to 15 numeric or 11 alphanumeric characters. All characters non-ASCII will be replaced with its equivalent if exist any (á => a), empty in another case. 
to
 Destination mobile number in international format. Country code must be included.Ex: to=447525812121 when sending to UK. 
text
 Body of the text message (with a maximum length of 459 characters)
custom Include any reference string for your reference. Useful for your internal reports. Maximum 32 alphanumeric characters.
send_at When this message should be sent as timestamp in YYYY-MM-DD HH:MM:SS format. If you specify a time in the past, the message will be sent immediately.
report_url URL where you want to receive the delivery report (DLR).
concat Set to 1 if you want to allow concatenated messages (more than 160 characters). If concat is 0 (or it's not present) only first 160 chars will be sent.
encoding Set to UCS2 if you want to send messages UCS2 (70 Unicode characters per SMS) with accents, emoticons and special characters. If encoding is GSM7 (or it's not present) the SMS will be treated as GSM7 (160 non Unicode characters per SMS). The Unicode encoding is only applicable to the text of message.
fake Set to 1 if you want to simulate submitting messages, it's perfect for testing and debugging, it has no cost.

Tabla1.png

JSON

{
    "api_key":"399d2b438a53ebed3db8a7d52107f846",
    "report_url":"http://yourserver.com/callback/script",
    "link":"https://www.ebay.es",
    "concat":1,
    "messages":[
        {
            "from":"GOOD PIZZA",
            "to":"34666666111",
            "text":"Hi John! See our new offers only available for you: {LINK}",
            "send_at":"2018-02-18 17:30:00"
        },
        {
            "from":"GOOD PIZZA",
            "to":"34666666112",
            "text":"Hi Maria! See our new offers only available for you: {LINK}",
            "custom":"MyMsgID-12345",
            "send_at":"2018-02-18 17:30:00"
        }
    ]
}

PHP

$request = '{
    "api_key":"399d2b438a53ebed3db8a7d52107f846",
    "report_url":"http://yourserver.com/callback/script",
    "link":"https://www.ebay.es",
    "concat":1,
    "messages":[
        {
            "from":"GOOD PIZZA",
            "to":"34666666111",
            "text":"Hi John! See our new offers only available for you: {LINK}",
            "send_at":"2018-02-18 17:30:00"
        },
        {
            "from":"GOOD PIZZA",
            "to":"34666666112",
            "text":"Hi Maria! See our new offers only available for you: {LINK}",
            "custom":"MyMsgID-12345",
            "send_at":"2018-02-18 17:30:00"
        }
    ]
}';
        	
$headers = array('Content-Type: application/json');        	

$ch = curl_init('https://api.gateway360.com/api/3.0/sms/send-link');
curl_setopt($ch, CURLOPT_POST, 1);
curl_setopt($ch, CURLOPT_RETURNTRANSFER,true);
curl_setopt($ch, CURLOPT_HTTPHEADER, $headers);
curl_setopt($ch, CURLOPT_POSTFIELDS, $request);

$result = curl_exec($ch);
 
if (curl_errno($ch) != 0 ){
	die("curl error: ".curl_errno($ch));
}

JAVA

/** Imports */
import org.apache.http.HttpResponse;
import org.apache.http.client.HttpClient;
import org.apache.http.client.methods.HttpPost;
import org.apache.http.entity.StringEntity;
import org.apache.http.impl.client.HttpClientBuilder;
/** End imports */


HttpClient httpClient = HttpClientBuilder.create().build();
HttpPost request = new HttpPost("https://api.gateway360.com/api/3.0/sms/send-link");

StringEntity params = new StringEntity(
"{" +
"    \"api_key\":\"399d2b438a53ebed3db8a7d52107f846\"," +
"    \"report_url\":\"http://yourserver.com/callback/script\"," +
"    \"link\":\"https://ebay.es\"," +
"    \"concat\":1," +
"    \"messages\":["  +
"		{"               +
"    		\"from\":\"GOOD PIZZA\"," +
"    		\"to\":\"34666666111\","  +
"    		\"text\":\"Hi John! See our new offers only available for you: {LINK}\"," +
"    		\"send_at\":\"2018-02-18 17:30:00\""+
"		},"     +
"		{"               +
"    		\"from\":\"GOOD PIZZA\"," +
"    		\"to\":\"34666666112\","  +
"    		\"text\":\"Hi Maria! See our new offers only available for you: {LINK}\"," +
"    		\"send_at\":\"2018-02-18 17:30:00\""+
"		}"     +
"	]"  +
"}");

request.addHeader("content-type", "application/json");
request.addHeader("Accept","application/json");
request.setEntity(params);
HttpResponse response = httpClient.execute(request);

RESPONSE

Parameters

status The sending status of request - either "ok", "error"
result Array of results in the same order you submitted.
status The status of the message - either "ok", "error"
sms_id Operator message id (with a maximum length of 32 characters). This is helpful for delivery reports.
custom Custom field sent in request.
error_id In case the status values "error" this param gives you the error id.
error_msg In case the status values "error" this param has additional information. This param should be use just for debugging.
error_id In case the status values "error" we will indicate you here the error id.
error_msg In case the status values "error" this param has additional information. This param should be use just for debugging.

Example 1

200 OK
{
    "status":"ok",
    "result":[
        {
            "status":"ok",
            "sms_id":"1a8940dc7471427db3021cde5b464444",
            "custom":"test"
        },
        {
            "status":"ok",
            "sms_id":"1a8940dc7471427db3021cde5b464481",
            "custom":""
        }
    ]
}
Two messages successfully processed

Example 2

200 OK
{
    "status":"ok",
    "result":[
        {
            "status":"ok",
            "sms_id":"1a8940dc7471427db3021cde5b464444",
            "custom":"test"
        },
        {
            "status":"error",
            "error_id":"INVALID_SENDER",
            "error_msg":"Sender cannot exceed 11 alphanumeric or 15 numeric characters.",
            "custom":""
        },
        {
            "status":"error",
            "error_id":"INVALID_DESTINATION",
            "error_msg":"Destination number must be in international format.",
            "custom":"12345"
        },
        {
            "status":"error",
            "error_id":"NOT_ENOUGH_BALANCE",
            "error_msg":"Your account has no funds.",
            "custom":""
        },
        {
            "status":"error",
            "error_id":"INVALID_DATETIME",
            "error_msg":"Invalid datetime format.",
            "custom":""
        }
    ]
}
One message successfully processed, and the rest with several errors.

Example 3

401 Unauthorized
{
    "status":"error",
    "error_id":"UNAUTHORIZED",
    "error_msg":"Your API key may be invalid or your IP is blocked."
}
We didn't continue processing your request because your API Key wasn't valid.

Example 4

400 Bad Request
{
    "status":"error",
    "error_id":"JSON_PARSE_ERROR",
    "error_msg":"Your JSON was formatted incorrectly."
}
We couldn't process your request

ERRORS

Error ID Explanation
INVALID_CONTENT_TYPE The content type must be: Content-Type: application/json
JSON_PARSE_ERROR Your JSON was formatted incorrectly or was considered otherwise improper or incomplete. Check it here.
MISSING_PARAMS Your request is incomplete and missing some mandatory parameters.
BAD_PARAMS One or more of your parameters has incorrect format or value.
UNAUTHORIZED correctly or see if the IP is blocked in your account API settings.
INVALID_SENDER The sender address (from parameter) was not allowed for this message.
INVALID_DESTINATION Our Gateway was unable to process your destination. The number must be in MSISDN format. Check format here.
INVALID_TEXT The field was empty or is corrupt.
INVALID_DATETIME The format we were expecting was: YYYY-MM-DD HH:MM:SS
NOT_ENOUGH_BALANCE Your account has no funds to process this request, add credits to your account and try again.
LIMIT_EXCEEDED Your request has exceeded the maximum of 1000 sms requests per batch.

SPECIAL LONG CHARACTERS

There are 9 special characters that are counted as 2 individual characters when GSM encoded. This could result in a message becoming longer and therefore being concatenated.The following table identifies these characters.

Symbol Name Symbol Name
[ Open square | Vertical bar
\ Backslash } Right brace
] Close square ~ Tilde
^ Caret € Euro symbol
{ Left brace

GSM ENCODING

According to GSM specification, a standard SMS message can contain up to 140 bytes of data (payload). Standard latin (ISO-8859-1) character encoding represents a single character using 1 byte, which is 8 bits. Therefore, the maximum number of latin 1 characters that could be included in an sms is 140.

GSM encoding represents characters using 7 bits instead of 8. This therefore provides a maximum of 160 characters per SMS. (140 * 8 bits) / 7 bits = 160

This effectively halves the number of characters that the GSM character set can support, compared to ISO-8859-1. In order to include common characters that are usually represented using the 8th bit, these characters as well as other symbol characters must be re-mapped to a combination of lower bits. These re-mapped characters are often referred to as special characters. This re-mapping, in combination with packing 7-bit characters into 8- bit bytes is called GSM Encoding. 

NOTE
The below table lists the 7-bit default alphabet as specified by GSM 03.38
Hex Character name Character ISO-8859-1 Hex
0x00 COMMERCIAL AT @ 40
0x01 POUND SIGN £ A3
0x02 DOLLAR SIGN $ 24
0x03 YEN SIGN ¥ A5
0x04 LATIN SMALL LETTER E WITH GRAVE è E8
0x05 LATIN SMALL LETTER E WITH ACUTE é E9
0x06 LATIN SMALL LETTER U WITH GRAVE ù F9
0x07 LATIN SMALL LETTER I WITH GRAVE ì EC
0x08 LATIN SMALL LETTER O WITH GRAVE ò F2
0x09 LATIN SMALL LETTER C WITH CEDILLA (casechanged) Ç C7
0x0A Line Feed A
0x0B LATIN CAPITAL LETTER O WITH STROKE Ø D8
0x0C LATIN SMALL LETTER O WITH STROKE ø F8
0x0D Carriage Return D
0x0E LATIN CAPITAL LETTER A WITH RING ABOVE Å C5
0x0F LATIN SMALL LETTER A WITH RING ABOVE å E5
0x10 GREEK CAPITAL LETTER Δ
0x11 LOW LINE _ 5F
0x12 GREEK CAPITAL LETTER Φ
0x13 GREEK CAPITAL LETTER Γ
0x14 GREEK CAPITAL LETTER Λ
0x15 GREEK CAPITAL LETTER Ω
0x16 GREEK CAPITAL LETTER Π
0x17 GREEK CAPITAL LETTER Ψ
0x18 GREEK CAPITAL LETTER Σ
0x19 GREEK CAPITAL LETTER Θ
0x1A GREEK CAPITAL LETTER Ξ
0x1B ESCAPE TO EXTENSION
0x1B0A FORM FEED 12
0x1B14 CIRCUMFLEX ACCENT ^ 5E
0x1B28 LEFT CURLY BRACKET { 7B
0x1B29 RIGHT CURLY BRACKET } 7D
0x1B2F REVERSE SOLIDUS (BACKSLASH) \ 5C
0x1B3C LEFT SQUARE BRACKET [ 5B
0x1B3D TILDE ~ 7E
0x1B3E RIGHT SQUARE BRACKET ] 5D
0x1B40 VERTICAL BAR | 7C
0x1B65 EURO SIGN € A4 (ISO-8859-15)
0x1C LATIN CAPITAL LETTER AE Æ C6
0x1D LATIN SMALL LETTER AE æ E6
0x1E LATIN SMALL LETTER SHARP S (German) ß DF
0x1F LATIN CAPITAL LETTER E WITH ACUTE É C9
0x20 SPACE 20
0x21 EXCLAMATION MARK ! 21
0x22 QUOTATION MARK " 22
0x23 NUMBER SIGN # 23
0x25 PERCENT SIGN % 25
0x26 AMPERSAND & 26
0x27 APOSTROPHE 27
0x28 LEFT PARENTHESIS ( 28
0x29 RIGHT PARENTHESIS ) 29
0x2A ASTERISK * 2A
0x2B PLUS SIGN + 2B
0x2C COMMA , 2C
0x2D HYPHEN-MINUS - 2D
0x2E FULL STOP . 2E
0x2F SOLIDUS (SLASH) / 2F
0x30 DIGIT ZERO 0 30
0x31 DIGIT ONE 1 31
0x32 DIGIT TWO 2 32
0x33 DIGIT THREE 3 33
0x34 DIGIT FOUR 4 34
0x35 DIGIT FIVE 5 35
0x36 DIGIT SIX 6 36
0x37 DIGIT SEVEN 7 37
0x38 DIGIT EIGHT 8 38
0x39 DIGIT NINE 9 39
0x3A COLON : 3A
0x3B SEMICOLON ; 3B
0x3C LESS-THAN SIGN < 3C
0x3D EQUALS SIGN = 3D
0x3E GREATER-THAN SIGN > 3E
0x3F QUESTION MARK ? 3F
0x40 INVERTED EXCLAMATION MARK ¡ A1
0x41 LATIN CAPITAL LETTER A A 41
0x42 LATIN CAPITAL LETTER B B 42
0x43 LATIN CAPITAL LETTER C C 43
0x44 LATIN CAPITAL LETTER D D 44
0x45 LATIN CAPITAL LETTER E E 45
0x46 LATIN CAPITAL LETTER F F 46
0x47 LATIN CAPITAL LETTER G G 47
0x48 LATIN CAPITAL LETTER H H 48
0x49 LATIN CAPITAL LETTER I I 49
0x4A LATIN CAPITAL LETTER J J 4A
0x4B LATIN CAPITAL LETTER K K 4B
0x4C LATIN CAPITAL LETTER L L 4C
0x4D LATIN CAPITAL LETTER M M 4D
0x4E LATIN CAPITAL LETTER N N 4E
0x4F LATIN CAPITAL LETTER O O 4F
0x50 LATIN CAPITAL LETTER P P 50
0x51 LATIN CAPITAL LETTER Q Q 51
0x52 LATIN CAPITAL LETTER R R 52
0x53 LATIN CAPITAL LETTER S S 53
0x54 LATIN CAPITAL LETTER T T 54
0x55 LATIN CAPITAL LETTER U U 55
0x56 LATIN CAPITAL LETTER V V 56
0x57 LATIN CAPITAL LETTER W W 57
0x58 LATIN CAPITAL LETTER X X 58
0x59 LATIN CAPITAL LETTER Y Y 59
0x5A LATIN CAPITAL LETTER Z Z 5A
0x5B LATIN CAPITAL LETTER A WITH DIAERESIS Ä C4
0x5C LATIN CAPITAL LETTER O WITH DIAERESIS Ö D6
0x5D LATIN CAPITAL LETTER N WITH TILDE Ñ D1
0x5E LATIN CAPITAL LETTER U WITH DIAERESIS Ü DC
0x5F SECTION SIGN § A7
0x60 INVERTED QUESTION MARK ¿ BF
0x61 LATIN SMALL LETTER A a 61
0x62 LATIN SMALL LETTER B b 62
0x63 LATIN SMALL LETTER C c 63
0x64 LATIN SMALL LETTER D d 64
0x65 LATIN SMALL LETTER E e 65
0x66 LATIN SMALL LETTER F f 66
0x67 LATIN SMALL LETTER G g 67
0x68 LATIN SMALL LETTER H h 68
0x69 LATIN SMALL LETTER I i 69
0x6A L ATIN SMALL LETTER J j 6A
0x6B LATIN SMALL LETTER K k 6B
0x6C LATIN SMALL LETTER L l 6C
0x6D LATIN SMALL LETTER M m 6D
0x6E LATIN SMALL LETTER N n 6E
0x6F LATIN SMALL LETTER O o 6F
0x70 LATIN SMALL LETTER P p 70
0x71 LATIN SMALL LETTER Q q 71
0x72 LATIN SMALL LETTER R r 72
0x73 LATIN SMALL LETTER S s 73
0x74 LATIN SMALL LETTER T t 74
0x75 LATIN SMALL LETTER U u 75
0x76 LATIN SMALL LETTER V v 76
0x77 LATIN SMALL LETTER W w 77
0x78 LATIN SMALL LETTER X x 78
0x79 LATIN SMALL LETTER Y y 79
0x7A LATIN SMALL LETTER Z z 7A
0x7B LATIN SMALL LETTER A WITH DIAERESIS ä E4
0x7C LATIN SMALL LETTER O WITH DIAERESIS ö F6
0x7D LATIN SMALL LETTER N WITH TILDE ñ F1
0x7E LATIN SMALL LETTER U WITH DIAERESIS ü FC
0x7F LATIN SMALL LETTER A WITH GRAVE à E0

UCS2 ENCODING

UCS2 is the Unicode format required for SMS, as opposed to the later format UTF-16. Since each UCS2 character requires 2 bytes, the SMS message length is reduced to 70 characters: 140 bytes / 2 bytes = 70 characters. You must also set the correct Data Coding Scheme value, 0 x 08 or 8 in the case of UCS2. UCS2 encoding allows the use of emoticons in SMS and these are treated as characters so you can write it in your SMS as any other character. Unicode messages can be concatenated. The concatenation headers reduce the characters available for content as follows:

Number of SMS Maximum Message Length
1 70 characters.
2 134 characters.
3 201 characters.
4 268 characters.
5 335 characters.
6 402 characters.
7 469 characters.
8 536 characters.

JSON

{
    "api_key":"399d2b438a53ebed3db8a7d52107f846",
    "report_url":"http://yourserver.com/callback/script",
    "concat":1,
    "messages":[
        {
            "from":"GOOD PIZZA",
            "to":"34666666111",
            "text":"Hi John, today 2x1 in pizzas, watch the game like a boss with our new pepperoni pizza!",
            "send_at":"2018-02-18 17:30:00"
        },
        {
            "from":"GOOD PIZZA",
            "to":"34666666112",
            "text":"Hi Maria, , today 2x1 in pizzas, watch the game like a boss with our new pepperoni pizza!",
            "custom":"MyMsgID-12345",
            "send_at":"2018-02-18 17:30:00"
        }
    ]
}

cURL

curl - X POST \
- H 'Content-Type: application/json' \
- H 'Accept: application/json' \
-d '{
 "api_key":"399d2b438a53ebed3db8a7d52107f846",
 "report_url":"http://yourserver.com/callback/script",
 "concat":1,
 "messages":[
 {
 "from":"GOOD PIZZA",
 "to":"34666666111",
 "text":"Hi John, today 2x1 in pizzas, watch the game like a boss
with our new pepperoni pizza!",
 "send_at":"2018-02-18 17:30:00"
 },
SEND SMS 8
 {
 "from":"GOOD PIZZA",
 "to":"34666666112",
 "text":"Hi Maria, , today 2x1 in pizzas, watch the game like a bo
ss with our new pepperoni pizza!",
 "custom":"MyMsgID-12345",
 "send_at":"2018-02-18 17:30:00"
 }
 ]
}' https: / /api.gateway360.com/api/3.0/sms/send

PHP

$request = '{
    "api_key":"399d2b438a53ebed3db8a7d52107f846",
    "report_url":"http://yourserver.com/callback/script",
    "concat":1,
    "messages":[
        {
            "from":"GOOD PIZZA",
            "to":"34666666111",
            "text":"Hi John, today 2x1 in pizzas, watch the game like a boss with our new pepperoni pizza!",
            "send_at":"2018-02-18 17:30:00"
        },
        {
            "from":"GOOD PIZZA",
            "to":"34666666112",
            "text":"Hi Maria, , today 2x1 in pizzas, watch the game like a boss with our new pepperoni pizza!",
            "custom":"MyMsgID-12345",
            "send_at":"2018-02-18 17:30:00"
        }
    ]
}';
        	
$headers = array('Content-Type: application/json');        	

$ch = curl_init('https://api.gateway360.com/api/3.0/sms/send');
curl_setopt($ch, CURLOPT_POST, 1);
curl_setopt($ch, CURLOPT_RETURNTRANSFER,true);
curl_setopt($ch, CURLOPT_HTTPHEADER, $headers);
curl_setopt($ch, CURLOPT_POSTFIELDS, $request);

$result = curl_exec($ch);
 
if (curl_errno($ch) != 0 ){
	die("curl error: ".curl_errno($ch));
}

Java

/** Imports */
import org.apache.http.HttpResponse;
import org.apache.http.client.HttpClient;
import org.apache.http.client.methods.HttpPost;
import org.apache.http.entity.StringEntity;
import org.apache.http.impl.client.HttpClientBuilder;
/** End imports */


HttpClient httpClient = HttpClientBuilder.create().build();
HttpPost request = new HttpPost("https://api.gateway360.com/api/3.0/sms/send");

StringEntity params = new StringEntity(
"{" +
"    \"api_key\":\"399d2b438a53ebed3db8a7d52107f846\"," +
"    \"report_url\":\"http://yourserver.com/callback/script\"," +
"    \"concat\":1," +
"    \"messages\":["  +
"		{"               +
"    		\"from\":\"GOOD PIZZA\"," +
"    		\"to\":\"34666666111\","  +
"    		\"text\":\"Hi John, today 2x1 in pizzas, watch the game like a boss with our new pepperoni pizza!\"," +
"    		\"send_at\":\"2018-02-18 17:30:00\""+
"		},"     +
"		{"               +
"    		\"from\":\"GOOD PIZZA\"," +
"    		\"to\":\"34666666112\","  +
"    		\"text\":\"Hi Maria, , today 2x1 in pizzas, watch the game like a boss with our new pepperoni pizza!\"," +
"    		\"send_at\":\"2018-02-18 17:30:00\""+
"		}"     +
"	]"  +
"}");

request.addHeader("content-type", "application/json");
request.addHeader("Accept","application/json");
request.setEntity(params);
HttpResponse response = httpClient.execute(request);

Ruby

require 'uri'
require 'net/http'

url = URI("https://api.gateway360.com/api/3.0/sms/send")

http = Net::HTTP.new(url.host, url.port)
http.use_ssl = true
http.verify_mode = OpenSSL::SSL::VERIFY_NONE

request = Net::HTTP::Post.new(url)
request["content-type"] = 'application/json'
request["accept"] = 'application/json'

request.body = '{
    "api_key":"399d2b438a53ebed3db8a7d52107f846",
    "report_url":"http://yourserver.com/callback/script",
    "concat":1,
    "messages":[
        {
            "from":"GOOD PIZZA",
            "to":"34666666111",
            "text":"Hi John, today 2x1 in pizzas, watch the game like a boss with our new pepperoni pizza!",
            "send_at":"2018-02-18 17:30:00"
        },
        {
            "from":"GOOD PIZZA",
            "to":"34666666112",
            "text":"Hi Maria, , today 2x1 in pizzas, watch the game like a boss with our new pepperoni pizza!",
            "custom":"MyMsgID-12345",
            "send_at":"2018-02-18 17:30:00"
        }
    ]
}'

response = http.request(request)
puts response.read_body

Python

conn = http.client.HTTPSConnection("api.gateway360.com")

payload = """{
    "api_key":"399d2b438a53ebed3db8a7d52107f846",
    "report_url":"http://yourserver.com/callback/script",
    "concat":1,
    "messages":[
        {
            "from":"GOOD PIZZA",
            "to":"34666666111",
            "text":"Hi John, today 2x1 in pizzas, watch the game like a boss with our new pepperoni pizza!",
            "send_at":"2018-02-18 17:30:00"
        },
        {
            "from":"GOOD PIZZA",
            "to":"34666666112",
            "text":"Hi Maria, , today 2x1 in pizzas, watch the game like a boss with our new pepperoni pizza!",
            "custom":"MyMsgID-12345",
            "send_at":"2018-02-18 17:30:00"
        }
    ]
}"""

headers = {
    'content-type': "application/json",
    'accept': "application/json"
    }

conn.request("POST", "/api/3.0/sms/send", payload, headers)

res = conn.getresponse()
data = res.read()

print(data.decode("utf-8"))

RESPONSE

Parameters

status The sending status of request - either "ok", "error"
result Array of results in the same order you submitted.
status The status of the message - either "ok", "error"
sms_id Operator message id (with a maximum length of 32 characters). This is helpful for delivery reports.
custom Custom field sent in request.
error_id In case the status values "error" this param gives you the error id.
error_msg In case the status values "error" this param has additional information. This param should be use just for debugging.
error_id In case the status values "error" we will indicate you here the error id.
error_msg In case the status values "error" this param has additional information. This param should be use just for debugging.

Example 1

200 OK
{
    "status":"ok",
    "result":[
        {
            "status":"ok",
            "sms_id":"1a8940dc7471427db3021cde5b464444",
            "custom":"test"
        },
        {
            "status":"ok",
            "sms_id":"1a8940dc7471427db3021cde5b464481",
            "custom":""
        }
    ]
}
Two messages successfully processed

Example 2

200 OK
{
    "status":"ok",
    "result":[
        {
            "status":"ok",
            "sms_id":"1a8940dc7471427db3021cde5b464444",
            "custom":"test"
        },
        {
            "status":"error",
            "error_id":"INVALID_SENDER",
            "error_msg":"Sender cannot exceed 11 alphanumeric or 15 numeric characters.",
            "custom":""
        },
        {
            "status":"error",
            "error_id":"INVALID_DESTINATION",
            "error_msg":"Destination number must be in international format.",
            "custom":"12345"
        },
        {
            "status":"error",
            "error_id":"NOT_ENOUGH_BALANCE",
            "error_msg":"Your account has no funds.",
            "custom":""
        },
        {
            "status":"error",
            "error_id":"INVALID_DATETIME",
            "error_msg":"Invalid datetime format.",
            "custom":""
        }
    ]
}
One message successfully processed, and the rest with several errors.

Example 3

401 Unauthorized
{
    "status":"error",
    "error_id":"UNAUTHORIZED",
    "error_msg":"Your API key may be invalid or your IP is blocked."
}
We didn't continue processing your request because your API Key wasn't valid.

Example 4

400 Bad Request
{
    "status":"error",
    "error_id":"JSON_PARSE_ERROR",
    "error_msg":"Your JSON was formatted incorrectly."
}
We couldn't process your request

ERRORS

Error ID Explanation
INVALID_CONTENT_TYPE The content type must be: Content-Type: application/json
JSON_PARSE_ERROR Your JSON was formatted incorrectly or was considered otherwise improper or incomplete. Check it here.
MISSING_PARAMS Your request is incomplete and missing some mandatory parameters.
BAD_PARAMS One or more of your parameters has incorrect format or value.
UNAUTHORIZED Your API key may be invalid, double-check that your API key was input correctly or see if the IP is blocked in your account API settings.
INVALID_SENDER The sender address (from parameter) was not allowed for this message.
INVALID_DESTINATION Our Gateway was unable to process your destination. The number must be in MSISDN format. Check format here.
INVALID_TEXT The field was empty or is corrupt.
INVALID_DATETIME The format we were expecting was: YYYY-MM-DD HH:MM:SS
NOT_ENOUGH_BALANCE Your account has no funds to process this request, add credits to your account and try again.
LIMIT_EXCEEDED Your request has exceeded the maximum of 1000 sms requests per batch.

SPECIAL LONG CHARACTERS

There are 9 special characters that are counted as 2 individual characters when GSM encoded. This could result in a message becoming longer and therefore being concatenated.The following table identifies these characters.

Symbol Name Symbol Name
[ Open square | Vertical bar
\ Backslash } Right brace
] Close square ~ Tilde
^ Caret € Euro symbol
{ Left brace

CONCATENATED GSM MESSAGES

Also referred to as a long message, multipart message or extended message, a concatenatedmessage is formed from several standard SMS containing a 7 byte concatenation header at the beginning of each one. Since this 7 byte header is within the message, it reduces the total size of each SMS to 153 characters each. The table below shows the maximum message length per number of SMS used for plain 7-bit messages. If you want to send a concatenated message, don’t forget you must set the parameter "concat" to value 1.

Number of SMS Maximum Message Length
1 160 characters.
2 306 characters.
3 459 characters.
4 612 characters.
5 765 characters.
6 918 characters.
7 1071 characters.
8 1224 characters.

GSM ENCODING

According to GSM specification, a standard SMS message can contain up to 140 bytes of data (payload). Standard latin (ISO-8859-1) character encoding represents a single character using 1 byte, which is 8 bits. Therefore, the maximum number of latin 1 characters that could be included in an sms is 140. GSM encoding represents characters using 7 bits instead of 8. This therefore provides a maximum of 160 characters per SMS. (140 * 8 bits) / 7 bits = 160 This effectively halves the number of characters that the GSM character set can support, compared to ISO-8859-1. In order to include common characters that are usually represented using the 8th bit, these characters as well as other symbol characters must be re-mapped to a combination of lower bits. These re-mapped characters are often referred to as special characters. This re-mapping, in combination with packing 7-bit characters into 8- bit bytes is called GSM Encoding. 

NOTE
The below table lists the 7-bit default alphabet as specified by GSM 03.38
Hex Character name Character ISO-8859-1 Hex
0x00 COMMERCIAL AT @ 40
0x01 POUND SIGN £ A3
0x02 DOLLAR SIGN $ 24
0x03 YEN SIGN ¥ A5
0x04 LATIN SMALL LETTER E WITH GRAVE è E8
0x05 LATIN SMALL LETTER E WITH ACUTE é E9
0x06 LATIN SMALL LETTER U WITH GRAVE ù F9
0x07 LATIN SMALL LETTER I WITH GRAVE ì EC
0x08 LATIN SMALL LETTER O WITH GRAVE ò F2
0x09 LATIN SMALL LETTER C WITH CEDILLA (casechanged) Ç C7
0x0A Line Feed A
0x0B LATIN CAPITAL LETTER O WITH STROKE Ø D8
0x0C LATIN SMALL LETTER O WITH STROKE ø F8
0x0D Carriage Return D
0x0E LATIN CAPITAL LETTER A WITH RING ABOVE Å C5
0x0F LATIN SMALL LETTER A WITH RING ABOVE å E5
0x10 GREEK CAPITAL LETTER Δ
0x11 LOW LINE _ 5F
0x12 GREEK CAPITAL LETTER Φ
0x13 GREEK CAPITAL LETTER Γ
0x14 GREEK CAPITAL LETTER Λ
0x15 GREEK CAPITAL LETTER Ω
0x16 GREEK CAPITAL LETTER Π
0x17 GREEK CAPITAL LETTER Ψ
0x18 GREEK CAPITAL LETTER Σ
0x19 GREEK CAPITAL LETTER Θ
0x1A GREEK CAPITAL LETTER Ξ
0x1B ESCAPE TO EXTENSION
0x1B0A FORM FEED 12
0x1B14 CIRCUMFLEX ACCENT ^ 5E
0x1B28 LEFT CURLY BRACKET { 7B
0x1B29 RIGHT CURLY BRACKET } 7D
0x1B2F REVERSE SOLIDUS (BACKSLASH) \ 5C
0x1B3C LEFT SQUARE BRACKET [ 5B
0x1B3D TILDE ~ 7E
0x1B3E RIGHT SQUARE BRACKET ] 5D
0x1B40 VERTICAL BAR | 7C
0x1B65 EURO SIGN € A4 (ISO-8859-15)
0x1C LATIN CAPITAL LETTER AE Æ C6
0x1D LATIN SMALL LETTER AE æ E6
0x1E LATIN SMALL LETTER SHARP S (German) ß DF
0x1F LATIN CAPITAL LETTER E WITH ACUTE É C9
0x20 SPACE 20
0x21 EXCLAMATION MARK ! 21
0x22 QUOTATION MARK " 22
0x23 NUMBER SIGN # 23
0x25 PERCENT SIGN % 25
0x26 AMPERSAND & 26
0x27 APOSTROPHE 27
0x28 LEFT PARENTHESIS ( 28
0x29 RIGHT PARENTHESIS ) 29
0x2A ASTERISK * 2A
0x2B PLUS SIGN + 2B
0x2C COMMA , 2C
0x2D HYPHEN-MINUS - 2D
0x2E FULL STOP . 2E
0x2F SOLIDUS (SLASH) / 2F
0x30 DIGIT ZERO 0 30
0x31 DIGIT ONE 1 31
0x32 DIGIT TWO 2 32
0x33 DIGIT THREE 3 33
0x34 DIGIT FOUR 4 34
0x35 DIGIT FIVE 5 35
0x36 DIGIT SIX 6 36
0x37 DIGIT SEVEN 7 37
0x38 DIGIT EIGHT 8 38
0x39 DIGIT NINE 9 39
0x3A COLON : 3A
0x3B SEMICOLON ; 3B
0x3C LESS-THAN SIGN < 3C
0x3D EQUALS SIGN = 3D
0x3E GREATER-THAN SIGN > 3E
0x3F QUESTION MARK ? 3F
0x40 INVERTED EXCLAMATION MARK ¡ A1
0x41 LATIN CAPITAL LETTER A A 41
0x42 LATIN CAPITAL LETTER B B 42
0x43 LATIN CAPITAL LETTER C C 43
0x44 LATIN CAPITAL LETTER D D 44
0x45 LATIN CAPITAL LETTER E E 45
0x46 LATIN CAPITAL LETTER F F 46
0x47 LATIN CAPITAL LETTER G G 47
0x48 LATIN CAPITAL LETTER H H 48
0x49 LATIN CAPITAL LETTER I I 49
0x4A LATIN CAPITAL LETTER J J 4A
0x4B LATIN CAPITAL LETTER K K 4B
0x4C LATIN CAPITAL LETTER L L 4C
0x4D LATIN CAPITAL LETTER M M 4D
0x4E LATIN CAPITAL LETTER N N 4E
0x4F LATIN CAPITAL LETTER O O 4F
0x50 LATIN CAPITAL LETTER P P 50
0x51 LATIN CAPITAL LETTER Q Q 51
0x52 LATIN CAPITAL LETTER R R 52
0x53 LATIN CAPITAL LETTER S S 53
0x54 LATIN CAPITAL LETTER T T 54
0x55 LATIN CAPITAL LETTER U U 55
0x56 LATIN CAPITAL LETTER V V 56
0x57 LATIN CAPITAL LETTER W W 57
0x58 LATIN CAPITAL LETTER X X 58
0x59 LATIN CAPITAL LETTER Y Y 59
0x5A LATIN CAPITAL LETTER Z Z 5A
0x5B LATIN CAPITAL LETTER A WITH DIAERESIS Ä C4
0x5C LATIN CAPITAL LETTER O WITH DIAERESIS Ö D6
0x5D LATIN CAPITAL LETTER N WITH TILDE Ñ D1
0x5E LATIN CAPITAL LETTER U WITH DIAERESIS Ü DC
0x5F SECTION SIGN § A7
0x60 INVERTED QUESTION MARK ¿ BF
0x61 LATIN SMALL LETTER A a 61
0x62 LATIN SMALL LETTER B b 62
0x63 LATIN SMALL LETTER C c 63
0x64 LATIN SMALL LETTER D d 64
0x65 LATIN SMALL LETTER E e 65
0x66 LATIN SMALL LETTER F f 66
0x67 LATIN SMALL LETTER G g 67
0x68 LATIN SMALL LETTER H h 68
0x69 LATIN SMALL LETTER I i 69
0x6A L ATIN SMALL LETTER J j 6A
0x6B LATIN SMALL LETTER K k 6B
0x6C LATIN SMALL LETTER L l 6C
0x6D LATIN SMALL LETTER M m 6D
0x6E LATIN SMALL LETTER N n 6E
0x6F LATIN SMALL LETTER O o 6F
0x70 LATIN SMALL LETTER P p 70
0x71 LATIN SMALL LETTER Q q 71
0x72 LATIN SMALL LETTER R r 72
0x73 LATIN SMALL LETTER S s 73
0x74 LATIN SMALL LETTER T t 74
0x75 LATIN SMALL LETTER U u 75
0x76 LATIN SMALL LETTER V v 76
0x77 LATIN SMALL LETTER W w 77
0x78 LATIN SMALL LETTER X x 78
0x79 LATIN SMALL LETTER Y y 79
0x7A LATIN SMALL LETTER Z z 7A
0x7B LATIN SMALL LETTER A WITH DIAERESIS ä E4
0x7C LATIN SMALL LETTER O WITH DIAERESIS ö F6
0x7D LATIN SMALL LETTER N WITH TILDE ñ F1
0x7E LATIN SMALL LETTER U WITH DIAERESIS ü FC
0x7F LATIN SMALL LETTER A WITH GRAVE à E0

UCS2 ENCODING

UCS2 is the Unicode format required for SMS, as opposed to the later format UTF-16. Since each UCS2 character requires 2 bytes, the SMS message length is reduced to 70 characters: 140 bytes / 2 bytes = 70 characters. You must also set the correct Data Coding Scheme value, 0 x 08 or 8 in the case of UCS2. UCS2 encoding allows the use of emoticons in SMS and these are treated as characters so you can write it in your SMS as any other character. Unicode messages can be concatenated. The concatenation headers reduce the characters available for content as follows:

Number of SMS Maximum Message Length
1 70 characters.
2 134 characters.
3 201 characters.
4 268 characters.
5 335 characters.
6 402 characters.
7 469 characters.
8 536 characters.


GET REPORTS

Once you have submitted a message and the message has been delivered to the handset, the operator responds with a delivery report. It could take seconds or 48 hours to receive the delivery report from the operator, depending on the network. 

NOTE
To use this method you need to specify the url callback in the param "report_url" when
you send the message.

REQUEST TO YOUR SERVER

When we receive delivery reports we will send to your server instantly in batches, so each request can contain up to 1,000 delivery reports in a JSON format.

Parameters

Array of delivery reports founds.
sms_id The message id.
from The sender of the message you sent.
to The destination number of the message you sent.
custom The custom value of the message you sent.
sms_date The date & time of the message you sent in the format: YYYY-MM-DD HH:MM:SS
status The status of the message, check the following table to see possible values.
dlr_date The date & time of the status.

JSON

[
    {
        "sms_id":"034d2acec0eb44af842de6a00bf4d934",
        "from":"SUPERGOL",
        "to":"34666666666",
        "custom":"YourReferenceID-774843",
        "sms_date":"2015-06-02 01:43:47",
        "status":"DELIVRD",
        "dlr_date":"2015-06-02 01:43:50"
    },
    {
        "sms_id":"034d2acec0eb44af842de6a00bf4d892",
        "from":"SUPERGOL",
        "to":"34666666666",
        "custom":"YourReferenceID-774849",
        "sms_date":"2015-06-02 01:43:47",
        "status":"DELIVRD",
        "dlr_date":"2015-06-02 01:43:49"
    }
]
Two delivery reports sent

STATUS VALUES

DELIVRD Message delivered to destination.
ACCEPTD Message is in accepted state, this state is temporary.
EXPIRED Message validity period has expired, the expiration of a message is 48 hours if not specified.
DELETED Message has been deleted due to the operator's reasons.
UNDELIV Message wasn't delivered by SMSC, expiration, not reachable, operator problems, portability...
UNKNOWN Message is in unknown state, the operator is trying, maybe the cellphone is turned off.
REJECTD Message is in rejected state, the destination or the operator rejected the message.


YOUR SERVER RESPONSE

In order to accept the delivery reports, your server must respond with HTTP status code 200 OK. If you cannot process the data at this time, for example, due to a database problem, you can return any other error such as status code 500. If a status code other than 200 is received, the request will be retried every 30 minutes for a period of 6 hours.

SEND SMS LANDING

With this method you can send bulk SMS Landing easily. This method has been extremely optimized to send more than 500.000 SMS in less than one hour. To send SMS Landing via API, you must first have it created in your account in your user panel, since you will need `landing_id` to send it.

Api sms1.png

ENDPOINT

https://api.gateway360.com/api/3.0/sms/send-landing

REQUEST

Parameters

api_key Your API Key.
messages Array of messages you want to send.
from Originator address (sender). Up to 15 numeric or 11 alphanumeric characters. All characters non-ASCII will be replaced with its equivalent if exist any (á => a), empty in another case.
to Destination mobile number in international format. Country code must be included.Ex: to=447525812121 when sending to UK.
text Body of the text message including the tag {LANDING} (with a maximum length of 459 characters). Ex: "Déjà vu, you can find it and more in our shop: {LANDING}"
custom Include any reference string for your reference. Useful for your internal reports. Maximum 32 alphanumeric characters.
send_at When this message should be sent as timestamp in YYYY-MM-DD HH:MM:SS format. If you specify a time in the past, the message will be sent immediately.
landing_id ID of the landing template created in your account.
campaign_name Name of the campaign in case your want to group more than one SMS in a unique campaign to see it in your panel (otherway no one campaign will be created).
report_url URL where you want to receive the delivery report (DLR) and the events of the landing as your client open it or click in some link or action.
concat Set to 1 if you want to allow concatenated messages (more than 160 characters). If concat is 0 (or it's not present) only first 160 chars will be sent.
encoding Set to UCS2 if you want to send messages UCS2 (70 Unicode characters per SMS) with accents, emoticons and special characters. If encoding is GSM7 (or it's not present) the SMS will be treated as GSM7 (160 non Unicode characters per SMS). The Unicode encoding is only applicable to the text of message.
fake Set to 1 if you want to simulate submitting messages, it's perfect for testing and debugging, it has no cost.

JSON

{
    "api_key":"399d2b438a53ebed3db8a7d52107f846",
    "report_url":"http://yourserver.com/callback/script",
    "landing_id":2749,
    "concat":1,
    "messages":[
        {
            "from":"GOOD PIZZA",
            "to":"34666666111",
            "text":"Hi John! See our new offers only available for you: {LANDING}",
            "send_at":"2018-02-18 17:30:00"
        },
        {
            "from":"GOOD PIZZA",
            "to":"34666666112",
            "text":"Hi Maria! See our new offers only available for you: {LANDING}",
            "custom":"MyMsgID-12345",
            "send_at":"2018-02-18 17:30:00"
        }
    ]
}

cURL

curl -X POST \
 -H 'Content-Type: application/json' \
 -H 'Accept: application/json' \
 -d '{
    "api_key":"399d2b438a53ebed3db8a7d52107f846",
    "report_url":"http://yourserver.com/callback/script",
    "landing_id":2749,
    "concat":1,
    "messages":[
        {
            "from":"GOOD PIZZA",
            "to":"34666666111",
            "text":"Hi John! See our new offers only available for you: {LANDING}",
            "send_at":"2018-02-18 17:30:00"
        },
        {
            "from":"GOOD PIZZA",
            "to":"34666666112",
            "text":"Hi Maria! See our new offers only available for you: {LANDING}",
            "custom":"MyMsgID-12345",
            "send_at":"2018-02-18 17:30:00"
        }
    ]
}' https://api.gateway360.com/api/3.0/sms/send-landing

PHP

$request = '{
    "api_key":"399d2b438a53ebed3db8a7d52107f846",
    "report_url":"http://yourserver.com/callback/script",
    "landing_id":2749,
    "concat":1,
    "messages":[
        {
            "from":"GOOD PIZZA",
            "to":"34666666111",
            "text":"Hi John! See our new offers only available for you: {LANDING}",
            "send_at":"2018-02-18 17:30:00"
        },
        {
            "from":"GOOD PIZZA",
            "to":"34666666112",
            "text":"Hi Maria! See our new offers only available for you: {LANDING}",
            "custom":"MyMsgID-12345",
            "send_at":"2018-02-18 17:30:00"
        }
    ]
}';
        	
$headers = array('Content-Type: application/json');        	

$ch = curl_init('https://api.gateway360.com/api/3.0/sms/send-landing');
curl_setopt($ch, CURLOPT_POST, 1);
curl_setopt($ch, CURLOPT_RETURNTRANSFER,true);
curl_setopt($ch, CURLOPT_HTTPHEADER, $headers);
curl_setopt($ch, CURLOPT_POSTFIELDS, $request);

$result = curl_exec($ch);
 
if (curl_errno($ch) != 0 ){
	die("curl error: ".curl_errno($ch));
}


Java

/** Imports */
import org.apache.http.HttpResponse;
import org.apache.http.client.HttpClient;
import org.apache.http.client.methods.HttpPost;
import org.apache.http.entity.StringEntity;
import org.apache.http.impl.client.HttpClientBuilder;
/** End imports */


HttpClient httpClient = HttpClientBuilder.create().build();
HttpPost request = new HttpPost("https://api.gateway360.com/api/3.0/sms/send-landing");

StringEntity params = new StringEntity(
"{" +
"    \"api_key\":\"399d2b438a53ebed3db8a7d52107f846\"," +
"    \"report_url\":\"http://yourserver.com/callback/script\"," +
"    \"landing_id\":2749," +
"    \"concat\":1," +
"    \"messages\":["  +
"		{"               +
"    		\"from\":\"GOOD PIZZA\"," +
"    		\"to\":\"34666666111\","  +
"    		\"text\":\"Hi John! See our new offers only available for you: {LANDING}\"," +
"    		\"send_at\":\"2018-02-18 17:30:00\""+
"		},"     +
"		{"               +
"    		\"from\":\"GOOD PIZZA\"," +
"    		\"to\":\"34666666112\","  +
"    		\"text\":\"Hi Maria! See our new offers only available for you: {LANDING}\"," +
"    		\"send_at\":\"2018-02-18 17:30:00\""+
"		}"     +
"	]"  +
"}");

request.addHeader("content-type", "application/json");
request.addHeader("Accept","application/json");
request.setEntity(params);
HttpResponse response = httpClient.execute(request);

RESPONSE

Parameters

status The sending status of request - either "ok", "error"
result Array of results in the same order you submitted.
status The status of the message - either "ok", "error"
sms_id Operator message id (with a maximum length of 32 characters). This is helpful for delivery reports.
custom Custom field sent in request.
error_id In case the status values "error" this param gives you the error id.
error_msg In case the status values "error" this param has additional information. This param should be use just for debugging.
error_id In case the status values "error" we will indicate you here the error id.
error_msg In case the status values "error" this param has additional information. This param should be use just for debugging.

Example 1

200 OK
{
    "status":"ok",
    "result":[
        {
            "status":"ok",
            "sms_id":"1a8940dc7471427db3021cde5b464444",
            "custom":"test"
        },
        {
            "status":"ok",
            "sms_id":"1a8940dc7471427db3021cde5b464481",
            "custom":""
        }
    ]
}
Two messages successfully processed

Example 2

200 OK
{
    "status":"ok",
    "result":[
        {
            "status":"ok",
            "sms_id":"1a8940dc7471427db3021cde5b464444",
            "custom":"test"
        },
        {
            "status":"error",
            "error_id":"INVALID_SENDER",
            "error_msg":"Sender cannot exceed 11 alphanumeric or 15 numeric characters.",
            "custom":""
        },
        {
            "status":"error",
            "error_id":"INVALID_DESTINATION",
            "error_msg":"Destination number must be in international format.",
            "custom":"12345"
        },
        {
            "status":"error",
            "error_id":"NOT_ENOUGH_BALANCE",
            "error_msg":"Your account has no funds.",
            "custom":""
        },
        {
            "status":"error",
            "error_id":"INVALID_DATETIME",
            "error_msg":"Invalid datetime format.",
            "custom":""
        }
    ]
}
One message successfully processed, and the rest with several errors.

Example 3

401 Unauthorized
{
    "status":"error",
    "error_id":"UNAUTHORIZED",
    "error_msg":"Your API key may be invalid or your IP is blocked."
}
We didn't continue processing your request because your API Key wasn't valid.

Example 4

400 Bad Request
{
    "status":"error",
    "error_id":"JSON_PARSE_ERROR",
    "error_msg":"Your JSON was formatted incorrectly."
}
We couldn't process your request


GET REPORTS (SMS LANDING)

Once you have submitted a message and the message has been delivered to the handset, the operator responds with a delivery report. It could take seconds or 48 hours to receive the delivery report from the operator, depending on the network. In addition, SMS Landing can send you reports whenever your client will open the landing page and when he click in any link, map or action button of the landing page. 

NOTE
To use this method you need to specify the url callback in the param "report_url" when
you send the message.

REQUEST TO YOUR SERVER

When we receive delivery reports we will send to your server instantly in batches, so each request can contain up to 1,000 delivery reports in a JSON format.

DLR REQUEST

Parameters

Array of delivery reports founds.
sms_id The message id.
from The sender of the message you sent.
to The destination number of the message you sent.
custom The custom value of the message you sent.
sms_date The date & time of the message you sent in the format: YYYY-MM-DD HH:MM:SS
status The status of the message, check the following table to see possible values.
dlr_date The date & time of the status.


JSON

[
    {
        "sms_id":"034d2acec0eb44af842de6a00bf4d934",
        "from":"SUPERGOL",
        "to":"34666666666",
        "custom":"YourReferenceID-774843",
        "sms_date":"2015-06-02 01:43:47",
        "status":"DELIVRD",
        "dlr_date":"2015-06-02 01:43:50"
    },
    {
        "sms_id":"034d2acec0eb44af842de6a00bf4d892",
        "from":"SUPERGOL",
        "to":"34666666666",
        "custom":"YourReferenceID-774849",
        "sms_date":"2015-06-02 01:43:47",
        "status":"DELIVRD",
        "dlr_date":"2015-06-02 01:43:49"
    }
]
Two delivery reports sent

STATUS VALUES

DELIVRD Message delivered to destination.
ACCEPTD Message is in accepted state, this state is temporary.
EXPIRED Message validity period has expired, the expiration of a message is 48 hours if not specified.
DELETED Message has been deleted due to the operator's reasons.
UNDELIV Message wasn't delivered by SMSC, expiration, not reachable, operator problems, portability...
UNKNOWN Message is in unknown state, the operator is trying, maybe the cellphone is turned off.
REJECTD Message is in rejected state, the destination or the operator rejected the message.

LANDING OPEN REQUEST

Parameters

sms_id The message id.
msisdn The destination number of the message you sent and who has opened the landing page.
timestamp The datetime when your client has opened the landing in the format: YYYY-MM-DD HH:MM:SS.
ip The ip from the landing page has been opened.
city The city from the landing page has been opened.
device The device OS (Operative System) from the landing page has been opened.
user_agent The user_agent of the device from the landing page has been opened.
brand The brand of the device from the landing page has been opened.
model The model of the device from the landing page has been opened.
full_name The model full name of the device from the landing page has been opened.
marketing_name The marketing name of the device from the landing page has been opened.

JSON

{
        "034d2acec0eb44af842de6a00bf4d934":
		{
		"msisdn":"34666666666",
		"timestamp":"2017-08-07 17:05:35",
		"ip":"8.8.8.8",
		"city":"Madrid",
		"device":"Android",
		"user_agent":"Mozilla/5.0 (Linux; Android 7.0; SAMSUNG SM-G950F Build/NRD90M) AppleWebKit/537.36",
		"brand":"Samsung",
		"model":"Galaxy S8",
		"full_name":"Samsung Galaxy S8",
		"marketing_name":"SAMSUNG SM-G950F"
	}
}

YOUR SERVER RESPONSE

In order to accept the delivery reports, your server must respond with HTTP status code 200 OK. If you cannot process the data at this time, for example, due to a database problem, you can return any other error such as status code 500. If a status code other than 200 is received, the request will be retried every 30 minutes for a period of 6 hours.

LANDING CLICK REQUEST

Parameters

sms_id The message id.
msisdn The destination number of the message you sent and who has opened the landing page.
timestamp The datetime when your client has clicked the link in the format: YYYY-MM-DD HH:MM:SS.
click The link (button, map, image...) which your client have clicked.

JSON

{
        "034d2acec0eb44af842de6a00bf4d934":
		{
		"msisdn":"34666666666",
		"timestamp":"2017-08-07 17:06:15",
		"click":"https://yourpage.com/more-information",
	}
}

YOUR SERVER RESPONSE

In order to accept the delivery reports, your server must respond with HTTP status code 200 OK. If you cannot process the data at this time, for example, due to a database problem, you can return any other error such as status code 500. If a status code other than 200 is received, the request will be retried every 30 minutes for a period of 6 hours.

SEND SMS SURVEY

With this method you can send bulk SMS Survey easily. This method has been extremely optimized to send more than 500.000 SMS in less than one hour. To send SMS Survey via API, you must first have it created in your account in your user panel, since you will need `survey_id` to send it.

Api sms2.png

ENDPOINT

https://api.gateway360.com/api/3.0/sms/send-survey

REQUEST

Parameters

api_key
 Your API Key. 
messages
 Array of messages you want to send. 
from
 Originator address (sender). Up to 15 numeric or 11 alphanumeric characters. All characters non-ASCII will be replaced with its equivalent if exist any (á => a), empty in another case. 
to
 Destination mobile number in international format. Country code must be included.Ex: to=447525812121 when sending to UK. 
text
 Body of the text message including the tag {SURVEY} (with a maximum length of 459 characters). Ex: "Déjà vu, you can find it and more in our shop: {SURVEY}"
custom Include any reference string for your reference. Useful for your internal reports. Maximum 32 alphanumeric characters.
send_at When this message should be sent as timestamp in YYYY-MM-DD HH:MM:SS format. If you specify a time in the past, the message will be sent immediately. 
survey_id
 ID of the survey template created in your account.
campaign_name Name of the campaign in case your want to group more than one SMS in a unique campaign to see it in your panel (otherway no one campaign will be created).
report_url URL where you want to receive the delivery report (DLR) and the events of the survey as your client open it or complete it.
concat Set to 1 if you want to allow concatenated messages (more than 160 characters). If concat is 0 (or it's not present) only first 160 chars will be sent.
encoding Set to UCS2 if you want to send messages UCS2 (70 Unicode characters per SMS) with accents, emoticons and special characters. If encoding is GSM7 (or it's not present) the SMS will be treated as GSM7 (160 non Unicode characters per SMS). The Unicode encoding is only applicable to the text of message
fake Set to 1 if you want to simulate submitting messages, it's perfect for testing and debugging, it has no cost.

Tabla1.png

JSON

{
    "api_key":"399d2b438a53ebed3db8a7d52107f846",
    "report_url":"http://yourserver.com/callback/script",
    "survey_id":573,
    "concat":1,
    "messages":[
        {
            "from":"GOOD PIZZA",
            "to":"34666666111",
            "text":"Hi John, thanks for your order! Please, complete this survey to improve our service: {SURVEY}",
            "send_at":"2018-02-18 17:30:00"
        },
        {
            "from":"GOOD PIZZA",
            "to":"34666666112",
            "text":"Hi Maria, thanks for your order! Please, complete this survey to improve our service: {SURVEY}",
            "custom":"MyMsgID-12345",
            "send_at":"2018-02-18 17:30:00"
        }
    ]
}

PHP

$request = '{
    "api_key":"399d2b438a53ebed3db8a7d52107f846",
    "report_url":"http://yourserver.com/callback/script",
    "survey_id":573,
    "concat":1,
    "messages":[
        {
            "from":"GOOD PIZZA",
            "to":"34666666111",
            "text":"Hi John, thanks for your order! Please, complete this survey to improve our service: {SURVEY}",
            "send_at":"2018-02-18 17:30:00"
        },
        {
            "from":"GOOD PIZZA",
            "to":"34666666112",
            "text":"Hi Maria, thanks for your order! Please, complete this survey to improve our service: {SURVEY}",
            "custom":"MyMsgID-12345",
            "send_at":"2018-02-18 17:30:00"
        }
    ]
}';
        	
$headers = array('Content-Type: application/json');        	

$ch = curl_init('https://api.gateway360.com/api/3.0/sms/send-survey');
curl_setopt($ch, CURLOPT_POST, 1);
curl_setopt($ch, CURLOPT_RETURNTRANSFER,true);
curl_setopt($ch, CURLOPT_HTTPHEADER, $headers);
curl_setopt($ch, CURLOPT_POSTFIELDS, $request);

$result = curl_exec($ch);
 
if (curl_errno($ch) != 0 ){
	die("curl error: ".curl_errno($ch));
}

JAVA

/** Imports */
import org.apache.http.HttpResponse;
import org.apache.http.client.HttpClient;
import org.apache.http.client.methods.HttpPost;
import org.apache.http.entity.StringEntity;
import org.apache.http.impl.client.HttpClientBuilder;
/** End imports */


HttpClient httpClient = HttpClientBuilder.create().build();
HttpPost request = new HttpPost("https://api.gateway360.com/api/3.0/sms/send-survey");

StringEntity params = new StringEntity(
"{" +
"    \"api_key\":\"399d2b438a53ebed3db8a7d52107f846\"," +
"    \"report_url\":\"http://yourserver.com/callback/script\"," +
"    \"survey_id\":573," +
"    \"concat\":1," +
"    \"messages\":["  +
"		{"               +
"    		\"from\":\"GOOD PIZZA\"," +
"    		\"to\":\"34666666111\","  +
"    		\"text\":\"Hi John, today 2x1 in pizzas, watch the game like a boss with our new pepperoni pizza!\"," +
"    		\"send_at\":\"2018-02-18 17:30:00\""+
"		},"     +
"		{"               +
"    		\"from\":\"GOOD PIZZA\"," +
"    		\"to\":\"34666666112\","  +
"    		\"text\":\"Hi Maria, , today 2x1 in pizzas, watch the game like a boss with our new pepperoni pizza!\"," +
"    		\"send_at\":\"2018-02-18 17:30:00\""+
"		}"     +
"	]"  +
"}");

request.addHeader("content-type", "application/json");
request.addHeader("Accept","application/json");
request.setEntity(params);
HttpResponse response = httpClient.execute(request);

RESPONSE

status The sending status of request - either "ok", "error"
result Array of results in the same order you submitted.
status The status of the message - either "ok", "error"
sms_id Operator message id (with a maximum length of 32 characters). This is helpful for delivery reports.
custom Custom field sent in request.
error_id In case the status values "error" this param gives you the error id.
error_msg In case the status values "error" this param has additional information. This param should be use just for debugging.
error_id In case the status values "error" we will indicate you here the error id.
error_msg In case the status values "error" this param has additional information. This param should be use just for debugging.


Example 1

200 OK
{
    "status":"ok",
    "result":[
        {
            "status":"ok",
            "sms_id":"1a8940dc7471427db3021cde5b464444",
            "custom":"test"
        },
        {
            "status":"ok",
            "sms_id":"1a8940dc7471427db3021cde5b464481",
            "custom":""
        }
    ]
}
Two messages successfully processed

Example 2

200 OK
{
    "status":"ok",
    "result":[
        {
            "status":"ok",
            "sms_id":"1a8940dc7471427db3021cde5b464444",
            "custom":"test"
        },
        {
            "status":"error",
            "error_id":"INVALID_SENDER",
            "error_msg":"Sender cannot exceed 11 alphanumeric or 15 numeric characters.",
            "custom":""
        },
        {
            "status":"error",
            "error_id":"INVALID_DESTINATION",
            "error_msg":"Destination number must be in international format.",
            "custom":"12345"
        },
        {
            "status":"error",
            "error_id":"NOT_ENOUGH_BALANCE",
            "error_msg":"Your account has no funds.",
            "custom":""
        },
        {
            "status":"error",
            "error_id":"INVALID_DATETIME",
            "error_msg":"Invalid datetime format.",
            "custom":""
        }
    ]
}
One message successfully processed, and the rest with several errors.

Example 3

401 Unauthorized
{
    "status":"error",
    "error_id":"UNAUTHORIZED",
    "error_msg":"Your API key may be invalid or your IP is blocked."
}
We didn't continue processing your request because your API Key wasn't valid.

Example 4

400 Bad Request
{
    "status":"error",
    "error_id":"JSON_PARSE_ERROR",
    "error_msg":"Your JSON was formatted incorrectly."
}
We couldn't process your request

ERRORS

Error ID Explanation
INVALID_CONTENT_TYPE The content type must be: Content-Type: application/json
JSON_PARSE_ERROR Your JSON was formatted incorrectly or was considered otherwise improper or incomplete. Check it here.
MISSING_PARAMS Your request is incomplete and missing some mandatory parameters.
BAD_PARAMS One or more of your parameters has incorrect format or value.
UNAUTHORIZED correctly or see if the IP is blocked in your account API settings.
INVALID_SENDER The sender address (from parameter) was not allowed for this message.
INVALID_DESTINATION Our Gateway was unable to process your destination. The number must be in MSISDN format. Check format here.
INVALID_TEXT The field was empty or is corrupt.
INVALID_DATETIME The format we were expecting was: YYYY-MM-DD HH:MM:SS
NOT_ENOUGH_BALANCE Your account has no funds to process this request, add credits to your account and try again.
LIMIT_EXCEEDED Your request has exceeded the maximum of 1000 sms requests per batch.

SPECIAL LONG CHARACTERS

There are 9 special characters that are counted as 2 individual characters when GSM encoded. This could result in a message becoming longer and therefore being concatenated.The following table identifies these characters.

Symbol Name Symbol Name
[ Open square | Vertical bar
\ Backslash } Right brace
] Close square ~ Tilde
^ Caret € Euro symbol
{ Left brace

GSM ENCODING

According to GSM specification, a standard SMS message can contain up to 140 bytes of data (payload). Standard latin (ISO-8859-1) character encoding represents a single character using 1 byte, which is 8 bits. Therefore, the maximum number of latin 1 characters that could be included in an sms is 140.

GSM encoding represents characters using 7 bits instead of 8. This therefore provides a maximum of 160 characters per SMS. (140 * 8 bits) / 7 bits = 160

This effectively halves the number of characters that the GSM character set can support, compared to ISO-8859-1. In order to include common characters that are usually represented using the 8th bit, these characters as well as other symbol characters must be re-mapped to a combination of lower bits. These re-mapped characters are often referred to as special characters. This re-mapping, in combination with packing 7-bit characters into 8- bit bytes is called GSM Encoding. 

NOTE
The below table lists the 7-bit default alphabet as specified by GSM 03.38
Hex Character name Character ISO-8859-1 Hex
0x00 COMMERCIAL AT @ 40
0x01 POUND SIGN £ A3
0x02 DOLLAR SIGN $ 24
0x03 YEN SIGN ¥ A5
0x04 LATIN SMALL LETTER E WITH GRAVE è E8
0x05 LATIN SMALL LETTER E WITH ACUTE é E9
0x06 LATIN SMALL LETTER U WITH GRAVE ù F9
0x07 LATIN SMALL LETTER I WITH GRAVE ì EC
0x08 LATIN SMALL LETTER O WITH GRAVE ò F2
0x09 LATIN SMALL LETTER C WITH CEDILLA (casechanged) Ç C7
0x0A Line Feed A
0x0B LATIN CAPITAL LETTER O WITH STROKE Ø D8
0x0C LATIN SMALL LETTER O WITH STROKE ø F8
0x0D Carriage Return D
0x0E LATIN CAPITAL LETTER A WITH RING ABOVE Å C5
0x0F LATIN SMALL LETTER A WITH RING ABOVE å E5
0x10 GREEK CAPITAL LETTER Δ
0x11 LOW LINE _ 5F
0x12 GREEK CAPITAL LETTER Φ
0x13 GREEK CAPITAL LETTER Γ
0x14 GREEK CAPITAL LETTER Λ
0x15 GREEK CAPITAL LETTER Ω
0x16 GREEK CAPITAL LETTER Π
0x17 GREEK CAPITAL LETTER Ψ
0x18 GREEK CAPITAL LETTER Σ
0x19 GREEK CAPITAL LETTER Θ
0x1A GREEK CAPITAL LETTER Ξ
0x1B ESCAPE TO EXTENSION
0x1B0A FORM FEED 12
0x1B14 CIRCUMFLEX ACCENT ^ 5E
0x1B28 LEFT CURLY BRACKET { 7B
0x1B29 RIGHT CURLY BRACKET } 7D
0x1B2F REVERSE SOLIDUS (BACKSLASH) \ 5C
0x1B3C LEFT SQUARE BRACKET [ 5B
0x1B3D TILDE ~ 7E
0x1B3E RIGHT SQUARE BRACKET ] 5D
0x1B40 VERTICAL BAR | 7C
0x1B65 EURO SIGN € A4 (ISO-8859-15)
0x1C LATIN CAPITAL LETTER AE Æ C6
0x1D LATIN SMALL LETTER AE æ E6
0x1E LATIN SMALL LETTER SHARP S (German) ß DF
0x1F LATIN CAPITAL LETTER E WITH ACUTE É C9
0x20 SPACE 20
0x21 EXCLAMATION MARK ! 21
0x22 QUOTATION MARK " 22
0x23 NUMBER SIGN # 23
0x25 PERCENT SIGN % 25
0x26 AMPERSAND & 26
0x27 APOSTROPHE 27
0x28 LEFT PARENTHESIS ( 28
0x29 RIGHT PARENTHESIS ) 29
0x2A ASTERISK * 2A
0x2B PLUS SIGN + 2B
0x2C COMMA , 2C
0x2D HYPHEN-MINUS - 2D
0x2E FULL STOP . 2E
0x2F SOLIDUS (SLASH) / 2F
0x30 DIGIT ZERO 0 30
0x31 DIGIT ONE 1 31
0x32 DIGIT TWO 2 32
0x33 DIGIT THREE 3 33
0x34 DIGIT FOUR 4 34
0x35 DIGIT FIVE 5 35
0x36 DIGIT SIX 6 36
0x37 DIGIT SEVEN 7 37
0x38 DIGIT EIGHT 8 38
0x39 DIGIT NINE 9 39
0x3A COLON : 3A
0x3B SEMICOLON ; 3B
0x3C LESS-THAN SIGN < 3C
0x3D EQUALS SIGN = 3D
0x3E GREATER-THAN SIGN > 3E
0x3F QUESTION MARK ? 3F
0x40 INVERTED EXCLAMATION MARK ¡ A1
0x41 LATIN CAPITAL LETTER A A 41
0x42 LATIN CAPITAL LETTER B B 42
0x43 LATIN CAPITAL LETTER C C 43
0x44 LATIN CAPITAL LETTER D D 44
0x45 LATIN CAPITAL LETTER E E 45
0x46 LATIN CAPITAL LETTER F F 46
0x47 LATIN CAPITAL LETTER G G 47
0x48 LATIN CAPITAL LETTER H H 48
0x49 LATIN CAPITAL LETTER I I 49
0x4A LATIN CAPITAL LETTER J J 4A
0x4B LATIN CAPITAL LETTER K K 4B
0x4C LATIN CAPITAL LETTER L L 4C
0x4D LATIN CAPITAL LETTER M M 4D
0x4E LATIN CAPITAL LETTER N N 4E
0x4F LATIN CAPITAL LETTER O O 4F
0x50 LATIN CAPITAL LETTER P P 50
0x51 LATIN CAPITAL LETTER Q Q 51
0x52 LATIN CAPITAL LETTER R R 52
0x53 LATIN CAPITAL LETTER S S 53
0x54 LATIN CAPITAL LETTER T T 54
0x55 LATIN CAPITAL LETTER U U 55
0x56 LATIN CAPITAL LETTER V V 56
0x57 LATIN CAPITAL LETTER W W 57
0x58 LATIN CAPITAL LETTER X X 58
0x59 LATIN CAPITAL LETTER Y Y 59
0x5A LATIN CAPITAL LETTER Z Z 5A
0x5B LATIN CAPITAL LETTER A WITH DIAERESIS Ä C4
0x5C LATIN CAPITAL LETTER O WITH DIAERESIS Ö D6
0x5D LATIN CAPITAL LETTER N WITH TILDE Ñ D1
0x5E LATIN CAPITAL LETTER U WITH DIAERESIS Ü DC
0x5F SECTION SIGN § A7
0x60 INVERTED QUESTION MARK ¿ BF
0x61 LATIN SMALL LETTER A a 61
0x62 LATIN SMALL LETTER B b 62
0x63 LATIN SMALL LETTER C c 63
0x64 LATIN SMALL LETTER D d 64
0x65 LATIN SMALL LETTER E e 65
0x66 LATIN SMALL LETTER F f 66
0x67 LATIN SMALL LETTER G g 67
0x68 LATIN SMALL LETTER H h 68
0x69 LATIN SMALL LETTER I i 69
0x6A L ATIN SMALL LETTER J j 6A
0x6B LATIN SMALL LETTER K k 6B
0x6C LATIN SMALL LETTER L l 6C
0x6D LATIN SMALL LETTER M m 6D
0x6E LATIN SMALL LETTER N n 6E
0x6F LATIN SMALL LETTER O o 6F
0x70 LATIN SMALL LETTER P p 70
0x71 LATIN SMALL LETTER Q q 71
0x72 LATIN SMALL LETTER R r 72
0x73 LATIN SMALL LETTER S s 73
0x74 LATIN SMALL LETTER T t 74
0x75 LATIN SMALL LETTER U u 75
0x76 LATIN SMALL LETTER V v 76
0x77 LATIN SMALL LETTER W w 77
0x78 LATIN SMALL LETTER X x 78
0x79 LATIN SMALL LETTER Y y 79
0x7A LATIN SMALL LETTER Z z 7A
0x7B LATIN SMALL LETTER A WITH DIAERESIS ä E4
0x7C LATIN SMALL LETTER O WITH DIAERESIS ö F6
0x7D LATIN SMALL LETTER N WITH TILDE ñ F1
0x7E LATIN SMALL LETTER U WITH DIAERESIS ü FC
0x7F LATIN SMALL LETTER A WITH GRAVE à E0

UCS2 ENCODING

UCS2 is the Unicode format required for SMS, as opposed to the later format UTF-16. Since each UCS2 character requires 2 bytes, the SMS message length is reduced to 70 characters: 140 bytes / 2 bytes = 70 characters. You must also set the correct Data Coding Scheme value, 0 x 08 or 8 in the case of UCS2. UCS2 encoding allows the use of emoticons in SMS and these are treated as characters so you can write it in your SMS as any other character. Unicode messages can be concatenated. The concatenation headers reduce the characters available for content as follows:

Number of SMS Maximum Message Length
1 70 characters.
2 134 characters.
3 201 characters.
4 268 characters.
5 335 characters.
6 402 characters.
7 469 characters.
8 536 characters.

GET REPORTS (SMS SURVEY)

Once you have submitted a message and the message has been delivered to the handset, the operator responds with a delivery report. It could take seconds or 48 hours to receive the delivery report from the operator, depending on the network. In addition, SMS Landing can send you reports whenever your client will open the landing page and when he click in any link, map or action button of the landing page. 

NOTE
To use this method you need to specify the url callback in the param "report_url" when
you send the message.

REQUEST TO YOUR SERVER

When we receive delivery reports we will send to your server instantly in batches, so each request can contain up to 1,000 delivery reports in a JSON format.

DLR REQUEST

Parameters

Array of delivery reports founds.
sms_id The message id.
from The sender of the message you sent.
to The destination number of the message you sent.
custom The custom value of the message you sent.
sms_date The date & time of the message you sent in the format: YYYY-MM-DD HH:MM:SS
status The status of the message, check the following table to see possible values.
dlr_date The date & time of the status.

JSON

[
    {
        "sms_id":"034d2acec0eb44af842de6a00bf4d934",
        "from":"SUPERGOL",
        "to":"34666666666",
        "custom":"YourReferenceID-774843",
        "sms_date":"2015-06-02 01:43:47",
        "status":"DELIVRD",
        "dlr_date":"2015-06-02 01:43:50"
    },
    {
        "sms_id":"034d2acec0eb44af842de6a00bf4d892",
        "from":"SUPERGOL",
        "to":"34666666666",
        "custom":"YourReferenceID-774849",
        "sms_date":"2015-06-02 01:43:47",
        "status":"DELIVRD",
        "dlr_date":"2015-06-02 01:43:49"
    }
]
Two delivery reports sent

STATUS VALUES

DELIVRD Message delivered to destination.
ACCEPTD Message is in accepted state, this state is temporary.
EXPIRED Message validity period has expired, the expiration of a message is 48 hours if not specified.
DELETED Message has been deleted due to the operator's reasons.
UNDELIV Message wasn't delivered by SMSC, expiration, not reachable, operator problems, portability...
UNKNOWN Message is in unknown state, the operator is trying, maybe the cellphone is turned off.
REJECTD Message is in rejected state, the destination or the operator rejected the message.

SURVEY OPEN REQUEST

Parameters

sms_id The message id.
msisdn The destination number of the message you sent and who has opened the survey page.
timestamp The datetime when your client has opened the survey in the format: YYYY-MM-DD HH:MM:SS.
ip The ip from the survey page has been opened.
city The city from the survey page has been opened.
device The device OS (Operative System) from the survey page has been opened.
user_agent The user_agent of the device from the survey page has been opened.
brand The brand of the device from the survey page has been opened.
model The model of the device from the survey page has been opened.
full_name The model full name of the device from the survey page has been opened.
marketing_name The marketing name of the device from the survey page has been opened.

JSON

{
        "034d2acec0eb44af842de6a00bf4d934":
		{
		"msisdn":"34666666666",
		"timestamp":"2017-08-07 17:05:35",
		"ip":"8.8.8.8",
		"city":"Madrid",
		"device":"Android",
		"user_agent":"Mozilla/5.0 (Linux; Android 7.0; SAMSUNG SM-G950F Build/NRD90M) AppleWebKit/537.36",
		"brand":"Samsung",
		"model":"Galaxy S8",
		"full_name":"Samsung Galaxy S8",
		"marketing_name":"SAMSUNG SM-G950F"
	}
}

SURVEY COMPLETED REQUEST

The response obtained in this request will depends of the structure of the survey created in your account and the sequence of those fields will be the same, being this the list of possible fields:

  • checkbox-X
  • radio-X
  • textarea-X
  • select-X
  • date-X
  • time-X

X value corresponds to an identifier of the number of elements of that type, starting at 1

Parameters

sms_id The message id.
msisdn The destination number of the message you sent and who has opened the landing page.
timestamp The datetime when your client has completed the survey in the format: YYYY-MM-DD HH:MM:SS.
response The objects returned in this parameter will depend on the survey as well as its fields.

JSON

{
        "034d2acec0eb44af842de6a00bf4d934":
		{
		"msisdn":"34666666666",
		"timestamp":"2017-08-07 16:54:53",
		"response":{
			"radio-1": {
				"type": "radio",
				"question": "Have you bought in our shop before?",
				"answers": {
				  "predefined": [
					"No"
				  ]
				}
			  },
			  "textarea-1": {
				"type": "textarea",
				"question": "How did you find the purchase process?",
				"answers": {
				  "predefined": [
					"Really good and simple"
				  ]
				}
			  },
			  "radio-2": {
				"type": "radio",
				"question": "On a scale from 1 to 10, what score would you give us?",
				"answers": {
				  "predefined": [
					"9"
				  ]
				}
			  },
			  "checkbox-1": {
				"type": "checkbox",
				"question": "What did you like most about our brand?",
				"answers": {
				  "predefined": [
					"Simplicity",
					"Price"
				  ],
				  "other": [
					"You're awesome!"
				  ]
				}
			  }
		}
	}
}

YOUR SERVER RESPONSE

In order to accept the delivery reports, your server must respond with HTTP status code 200 OK. If you cannot process the data at this time, for example, due to a database problem, you can return any other error such as status code 500. If a status code other than 200 is received, the request will be retried every 30 minutes for a period of 6 hours.

SEND SMS LINK

With this method you can send bulk SMS Link easily. This method has been extremely optimized to send more than 500.000 SMS in less than one hour.

ENDPOINT

https://api.gateway360.com/api/3.0/sms/send-link

REQUEST

Parameters

api_key Your API Key.
messages Array of messages you want to send.
from Originator address (sender). Up to 15 numeric or 11 alphanumeric characters. All characters non-ASCII will be replaced with its equivalent if exist any (á => a), empty in another case.
to Destination mobile number in international format. Country code must be included.Ex: to=447525812121 when sending to UK.
text Body of the text message including the tag {LINK} (with a maximum length of 459 characters). Ex: "Déjà vu, you can find it and more in our shop: {LINK}"
custom Include any reference string for your reference. Useful for your internal reports. Maximum 32 alphanumeric characters.
send_at When this message should be sent as timestamp in YYYY-MM-DD HH:MM:SS format. If you specify a time in the past, the message will be sent immediately.
link URL you want to track when your client has click on it to access.
campaign_name Name of the campaign in case your want to group more than one SMS in a unique campaign to see it in your panel (otherway no one campaign will be created).
report_url URL where you want to receive the delivery report (DLR) and the event of the link as your client open it.
concat Set to 1 if you want to allow concatenated messages (more than 160 characters). If concat is 0 (or it's not present) only first 160 chars will be sent.
encoding Set to UCS2 if you want to send messages UCS2 (70 Unicode characters per SMS) with accents, emoticons and special characters. If encoding is GSM7 (or it's not present) the SMS will be treated as GSM7 (160 non Unicode characters per SMS). The Unicode encoding is only applicable to the text of message.
fake Set to 1 if you want to simulate submitting messages, it's perfect for testing and debugging, it has no cost.
Mandatory
Optional


JSON 

{
 " api_key ": "399d2b438a53ebed3db8a7d52107f846" ,
 " report_url ": "http://yourserver.com/callback/script" ,
 " link ": "https://www.ebay.es" ,
 " concat ": 1 ,
 " messages ": [
 {
 "from":"GOOD PIZZA",
 "to":"34666666111",
 "text":"Hi John! See our new offers only available for you: {LINK
}",
 "send_at":"2018-02-18 17:30:00"
 },
 {
 "from":"GOOD PIZZA",
 "to":"34666666112",
 "text":"Hi Maria! See our new offers only available for you: {LIN
K}",
 "custom":"MyMsgID-12345",
 "send_at":"2018-02-18 17:30:00"
 }
 ]
}

PHP 

$request = '{
    "api_key":"399d2b438a53ebed3db8a7d52107f846",
    "report_url":"http://yourserver.com/callback/script",
    "link":"https://www.ebay.es",
    "concat":1,
    "messages":[
        {
            "from":"GOOD PIZZA",
            "to":"34666666111",
            "text":"Hi John! See our new offers only available for you: {LINK}",
            "send_at":"2018-02-18 17:30:00"
        },
        {
            "from":"GOOD PIZZA",
            "to":"34666666112",
            "text":"Hi Maria! See our new offers only available for you: {LINK}",
            "custom":"MyMsgID-12345",
            "send_at":"2018-02-18 17:30:00"
        }
    ]
}';
        	
$headers = array('Content-Type: application/json');        	

$ch = curl_init('https://api.gateway360.com/api/3.0/sms/send-link');
curl_setopt($ch, CURLOPT_POST, 1);
curl_setopt($ch, CURLOPT_RETURNTRANSFER,true);
curl_setopt($ch, CURLOPT_HTTPHEADER, $headers);
curl_setopt($ch, CURLOPT_POSTFIELDS, $request);

$result = curl_exec($ch);
 
if (curl_errno($ch) != 0 ){
	die("curl error: ".curl_errno($ch));
}

JAVA 

/** Imports */
import org.apache.http.HttpResponse;
import org.apache.http.client.HttpClient;
import org.apache.http.client.methods.HttpPost;
import org.apache.http.entity.StringEntity;
import org.apache.http.impl.client.HttpClientBuilder;
/** End imports */


HttpClient httpClient = HttpClientBuilder.create().build();
HttpPost request = new HttpPost("https://api.gateway360.com/api/3.0/sms/send-link");

StringEntity params = new StringEntity(
"{" +
"    \"api_key\":\"399d2b438a53ebed3db8a7d52107f846\"," +
"    \"report_url\":\"http://yourserver.com/callback/script\"," +
"    \"link\":\"https://ebay.es\"," +
"    \"concat\":1," +
"    \"messages\":["  +
"		{"               +
"    		\"from\":\"GOOD PIZZA\"," +
"    		\"to\":\"34666666111\","  +
"    		\"text\":\"Hi John! See our new offers only available for you: {LINK}\"," +
"    		\"send_at\":\"2018-02-18 17:30:00\""+
"		},"     +
"		{"               +
"    		\"from\":\"GOOD PIZZA\"," +
"    		\"to\":\"34666666112\","  +
"    		\"text\":\"Hi Maria! See our new offers only available for you: {LINK}\"," +
"    		\"send_at\":\"2018-02-18 17:30:00\""+
"		}"     +
"	]"  +
"}");

request.addHeader("content-type", "application/json");
request.addHeader("Accept","application/json");
request.setEntity(params);
HttpResponse response = httpClient.execute(request);

RESPONSE

Parameters


status The sending status of request - either "ok", "error"
result Array of results in the same order you submitted.
status The status of the message - either "ok", "error"
sms_id Operator message id (with a maximum length of 32 characters). This is helpful for delivery reports.
custom Custom field sent in request.
error_id In case the status values "error" this param gives you the error id.
error_msg In case the status values "error" this param has additional information. This param should be use just for debugging.
error_id In case the status values "error" we will indicate you here the error id.
error_msg In case the status values "error" this param has additional information. This param should be use just for debugging.

EXAMPLES

200 OK 

{
    "status":"ok",
    "result":[
        {
            "status":"ok",
            "sms_id":"1a8940dc7471427db3021cde5b464444",
            "custom":"test"
        },
        {
            "status":"ok",
            "sms_id":"1a8940dc7471427db3021cde5b464481",
            "custom":""
        }
    ]
}

Two messages successfully processed

200 OK 

{
 " status ": "ok" ,
 " result ": [
 {
 "status":"ok",
 "sms_id":"1a8940dc7471427db3021cde5b464444",
 "custom":"test"
 },
 {
 "status":"error",
 "error_id":"INVALID_SENDER",
 "error_msg":"Sender cannot exceed 11 alphanumeric or 15 numeric c
haracters.",
 "custom":""
 },
 {
 "status":"error",
 "error_id":"INVALID_DESTINATION",
 "error_msg":"Destination number must be in international format."
,
 "custom":"12345"
 },
 {
 "status":"error",
 "error_id":"NOT_ENOUGH_BALANCE",
 "error_msg":"Your account has no funds.",
 "custom":""
 },
 {
 "status":"error",
 "error_id":"INVALID_DATETIME",
 "error_msg":"Invalid datetime format.",
 "custom":""
 }
 ]
}

One message successfully processed, and the rest with several errors.

401 Unauthorized 

{
 " status ": "error" ,
 " error_id ": "UNAUTHORIZED" ,
 " error_msg ": "Your API key may be invalid or your IP is blocked."
}

We didn't continue processing your request because your API Key wasn't valid

400 Bad Request 

{
 " status ": "error" ,
 " error_id ": "JSON_PARSE_ERROR" ,
 " error_msg ": "Your JSON was formatted incorrectly."
}

We couldn't process your request.

ERRORS

Error ID Explanation
INVALID_CONTENT_TYPE The content type must be: Content-Type: application/json
JSON_PARSE_ERROR https://jsonlint.com/
MISSING_PARAMS Your request is incomplete and missing some mandatory parameters.
BAD_PARAMS One or more of your parameters has incorrect format or value.
UNAUTHORIZED Your API key may be invalid, double-check that your API key was input correctly or see if the IP is blocked in your account API settings
INVALID_SENDER The sender address (from parameter) was not allowed for this message
INVALID_DESTINATION https://en.wikipedia.org/wiki/MSISDN
INVALID_TEXT The field was empty or is corrupt.
INVALID_DATETIME The format we were expecting was: YYYY-MM-DD HH:MM:SS
NOT_ENOUGH_BALANCE Your account has no funds to process this request, add credits to your account and try again.
LIMIT_EXCEEDED Your request has exceeded the maximum of 1000 sms requests per batch.

SPECIAL LONG CHARACTERS

There are 9 special characters that are counted as 2 individual characters when GSM encoded. This could result in a message becoming longer and therefore being concatenated.The following table identifies these characters.

Symbol Name Symbol Name
[ Open square Vertical bar
\ Backslash } Right brace
] Close square ~ Tilde
^ Caret € Euro symbol
{ Left brace

CONCATENATED GSM MESSAGES

Also referred to as a long message, multipart message or extended message, a concatenated message is formed from several standard SMS containing a 7 byte concatenation header at the beginning of each one. Since this 7 byte header is within the message, it reduces the total size of each SMS to 153 characters each. The table below shows the maximum message length per number of SMS used for plain 7-bit messages. If you want to send a concatenated message, don’t forget you must set the parameter "concat" to value 1.

Number of SMS Maximum Message Length
1 160 characters.
2 306 characters.
3 459 characters.
4 612 characters.
5 765 characters.
6 918 characters.
7 1071 characters.
8 1224 characters.

GSM ENCODING

According to GSM specification, a standard SMS message can contain up to 140 bytes of data (payload). Standard latin (ISO-8859-1) character encoding represents a single character using 1 byte, which is 8 bits. Therefore, the maximum number of latin 1 characters that could be included in an sms is 140. GSM encoding represents characters using 7 bits instead of 8. This therefore provides a maximum of 160 characters per SMS. (140 * 8 bits) / 7 bits = 160 This effectively halves the number of characters that the GSM character set can support, compared to ISO-8859-1. In order to include common characters that are usually represented using the 8th bit, these characters as well as other symbol characters must be re-mapped to a combination of lower bits. These re-mapped characters are often referred to as special characters. This re-mapping, in combination with packing 7-bit characters into 8- bit bytes is called GSM Encoding. 

NOTE
The below table lists the 7-bit default alphabet as specified by [https://en.wikipedia.org/wiki/GSM_03.38 GSM 03.38]
Hex Character name Character ISO-8859-1 Hex
0x00 COMMERCIAL AT @ 40
0x01 POUND SIGN £ A3
0x02 DOLLAR SIGN $ 24
0x03 YEN SIGN ¥ A5
0x04 LATIN SMALL LETTER E WITH GRAVE è E8
0x05 LATIN SMALL LETTER E WITH ACUTE é E9
0x06 LATIN SMALL LETTER U WITH GRAVE ù F9
0x07 LATIN SMALL LETTER I WITH GRAVE ì EC
0x08 LATIN SMALL LETTER O WITH GRAVE ò F2
0x09 LATIN SMALL LETTER C WITH CEDILLA (casechanged) Ç C7
0x0A Line Feed A
0x0B LATIN CAPITAL LETTER O WITH STROKE Ø D8
0x0C LATIN SMALL LETTER O WITH STROKE ø F8
0x0D Carriage Return D
0x0E LATIN CAPITAL LETTER A WITH RING ABOVE Å C5
0x0F LATIN SMALL LETTER A WITH RING ABOVE å E5
0x10 GREEK CAPITAL LETTER Δ
0x11 LOW LINE _ 5F
0x12 GREEK CAPITAL LETTER Φ
0x13 GREEK CAPITAL LETTER Γ
0x14 GREEK CAPITAL LETTER Λ
0x15 GREEK CAPITAL LETTER Ω
0x16 GREEK CAPITAL LETTER Π
0x17 GREEK CAPITAL LETTER Ψ
0x18 GREEK CAPITAL LETTER Σ
0x19 GREEK CAPITAL LETTER Θ
0x1A GREEK CAPITAL LETTER Ξ
0x1B ESCAPE TO EXTENSION
0x1B0A FORM FEED 12
0x1B14 CIRCUMFLEX ACCENT ^ 5E
0x1B28 LEFT CURLY BRACKET { 7B
0x1B29 RIGHT CURLY BRACKET } 7D
0x1B2F REVERSE SOLIDUS (BACKSLASH) \ 5C
0x1B3C LEFT SQUARE BRACKET [ 5B
0x1B3D TILDE ~ 7E
0x1B3E RIGHT SQUARE BRACKET ] 5D
0x1B40 VERTICAL BAR | 7C
0x1B65 EURO SIGN € A4 (ISO-8859-15)
0x1C LATIN CAPITAL LETTER AE Æ C6
0x1D LATIN SMALL LETTER AE æ E6
0x1E LATIN SMALL LETTER SHARP S (German) ß DF
0x1F LATIN CAPITAL LETTER E WITH ACUTE É C9
0x20 SPACE 20
0x21 EXCLAMATION MARK ! 21
0x22 QUOTATION MARK " 22
0x23 NUMBER SIGN # 23
0x25 PERCENT SIGN % 25
0x26 AMPERSAND & 26
0x27 APOSTROPHE 27
0x28 LEFT PARENTHESIS ( 28
0x29 RIGHT PARENTHESIS ) 29
0x2A ASTERISK * 2A
0x2B PLUS SIGN + 2B
0x2C COMMA , 2C
0x2D HYPHEN-MINUS - 2D
0x2E FULL STOP . 2E
0x2F SOLIDUS (SLASH) / 2F
0x30 DIGIT ZERO 0 30
0x31 DIGIT ONE 1 31
0x32 DIGIT TWO 2 32
0x33 DIGIT THREE 3 33
0x34 DIGIT FOUR 4 34
0x35 DIGIT FIVE 5 35
0x36 DIGIT SIX 6 36
0x37 DIGIT SEVEN 7 37
0x38 DIGIT EIGHT 8 38
0x39 DIGIT NINE 9 39
0x3A COLON : 3A
0x3B SEMICOLON ; 3B
0x3C LESS-THAN SIGN < 3C
0x3D EQUALS SIGN = 3D
0x3E GREATER-THAN SIGN > 3E
0x3F QUESTION MARK ? 3F
0x40 INVERTED EXCLAMATION MARK ¡ A1
0x41 LATIN CAPITAL LETTER A A 41
0x42 LATIN CAPITAL LETTER B B 42
0x43 LATIN CAPITAL LETTER C C 43
0x44 LATIN CAPITAL LETTER D D 44
0x45 LATIN CAPITAL LETTER E E 45
0x46 LATIN CAPITAL LETTER F F 46
0x47 LATIN CAPITAL LETTER G G 47
0x48 LATIN CAPITAL LETTER H H 48
0x49 LATIN CAPITAL LETTER I I 49
0x4A LATIN CAPITAL LETTER J J 4A
0x4B LATIN CAPITAL LETTER K K 4B
0x4C LATIN CAPITAL LETTER L L 4C
0x4D LATIN CAPITAL LETTER M M 4D
0x4E LATIN CAPITAL LETTER N N 4E
0x4F LATIN CAPITAL LETTER O O 4F
0x50 LATIN CAPITAL LETTER P P 50
0x51 LATIN CAPITAL LETTER Q Q 51
0x52 LATIN CAPITAL LETTER R R 52
0x53 LATIN CAPITAL LETTER S S 53
0x54 LATIN CAPITAL LETTER T T 54
0x55 LATIN CAPITAL LETTER U U 55
0x56 LATIN CAPITAL LETTER V V 56
0x57 LATIN CAPITAL LETTER W W 57
0x58 LATIN CAPITAL LETTER X X 58
0x59 LATIN CAPITAL LETTER Y Y 59
0x5A LATIN CAPITAL LETTER Z Z 5A
0x5B LATIN CAPITAL LETTER A WITH DIAERESIS Ä C4
0x5C LATIN CAPITAL LETTER O WITH DIAERESIS Ö D6
0x5D LATIN CAPITAL LETTER N WITH TILDE Ñ D1
0x5E LATIN CAPITAL LETTER U WITH DIAERESIS Ü DC
0x5F SECTION SIGN § A7
0x60 INVERTED QUESTION MARK ¿ BF
0x61 LATIN SMALL LETTER A a 61
0x62 LATIN SMALL LETTER B b 62
0x63 LATIN SMALL LETTER C c 63
0x64 LATIN SMALL LETTER D d 64
0x65 LATIN SMALL LETTER E e 65
0x66 LATIN SMALL LETTER F f 66
0x67 LATIN SMALL LETTER G g 67
0x68 LATIN SMALL LETTER H h 68
0x69 LATIN SMALL LETTER I i 69
0x6A L ATIN SMALL LETTER J j 6A
0x6B LATIN SMALL LETTER K k 6B
0x6C LATIN SMALL LETTER L l 6C
0x6D LATIN SMALL LETTER M m 6D
0x6E LATIN SMALL LETTER N n 6E
0x6F LATIN SMALL LETTER O o 6F
0x70 LATIN SMALL LETTER P p 70
0x71 LATIN SMALL LETTER Q q 71
0x72 LATIN SMALL LETTER R r 72
0x73 LATIN SMALL LETTER S s 73
0x74 LATIN SMALL LETTER T t 74
0x75 LATIN SMALL LETTER U u 75
0x76 LATIN SMALL LETTER V v 76
0x77 LATIN SMALL LETTER W w 77
0x78 LATIN SMALL LETTER X x 78
0x79 LATIN SMALL LETTER Y y 79
0x7A LATIN SMALL LETTER Z z 7A
0x7B LATIN SMALL LETTER A WITH DIAERESIS ä E4
0x7C LATIN SMALL LETTER O WITH DIAERESIS ö F6
0x7D LATIN SMALL LETTER N WITH TILDE ñ F1
0x7E LATIN SMALL LETTER U WITH DIAERESIS ü FC
0x7F LATIN SMALL LETTER A WITH GRAVE à E0

UCS2 ENCODING

UCS2 is the Unicode format required for SMS, as opposed to the later format UTF-16. Since each UCS2 character requires 2 bytes, the SMS message length is reduced to 70 characters: 140 bytes / 2 bytes = 70 characters. You must also set the correct Data Coding Scheme value, 0 x 08 or 8 in the case of UCS2. UCS2 encoding allows the use of emoticons in SMS and these are treated as characters so you can write it in your SMS as any other character. Unicode messages can be concatenated. The concatenation headers reduce the characters available for content as follows:

Number of SMS Maximum Message Length
1 70 characters.
2 134 characters.
3 201 characters.
4 268 characters.
5 335 characters.
6 402 characters.
7 469 characters.
8 536 characters.

GET REPORTS (SMS LINK)

Once you have submitted a message and the message has been delivered to the handset, the operator responds with a delivery report. It could take seconds or 48 hours to receive the delivery report from the operator, depending on the network. In addition, SMS Link can send you reports whenever your client will open the URL in your message. 

NOTE
To use this method you need to specify the url callback in the param "report_url" when
you send the message.

REQUEST TO YOUR SERVER

When we receive delivery reports we will send to your server instantly in batches, so each request can contain up to 1,000 delivery reports in a JSON format

DLR REQUEST

PARAMETERS

sms_id The message id.
from The sender of the message you sent.
to The destination number of the message you sent.
custom The custom value of the message you sent.
sms_date The date & time of the message you sent in the format: YYYY-MM-DD HH:MM:SS
status The status of the message, check the following table to see possible values.
dlr_date The date & time of the status.

JSON 

[
    {
        "sms_id":"034d2acec0eb44af842de6a00bf4d934",
        "from":"SUPERGOL",
        "to":"34666666666",
        "custom":"YourReferenceID-774843",
        "sms_date":"2015-06-02 01:43:47",
        "status":"DELIVRD",
        "dlr_date":"2015-06-02 01:43:50"
    },
    {
        "sms_id":"034d2acec0eb44af842de6a00bf4d892",
        "from":"SUPERGOL",
        "to":"34666666666",
        "custom":"YourReferenceID-774849",
        "sms_date":"2015-06-02 01:43:47",
        "status":"DELIVRD",
        "dlr_date":"2015-06-02 01:43:49"
    }
]

Two delivery reports sent

STATUS VALUES

DELIVRD Message delivered to destination.
ACCEPTD Message is in accepted state, this state is temporary.
EXPIRED Message validity period has expired, the expiration of a message is 48 hours if not specified.
DELETED Message has been deleted due to the operator's reasons.
UNDELIV Message wasn't delivered by SMSC, expiration, not reachable, operator problems, portability...
UNKNOWN Message is in unknown state, the operator is trying, maybe the cellphone is turned off.

LINK OPEN REQUEST

PARAMETERS

sms_id The message id.
msisdn The destination number of the message you sent and who has opened the landing page.
timestamp The datetime when your client has clicked the link in the format: YYYY-MM-DD HH:MM:SS.
ip The city from the landing page has been opened.

JSON 

{
        "034d2acec0eb44af842de6a00bf4d934":
		{
		"msisdn":"34666666666",
		"timestamp":"2017-08-07 16:41:57",
		"ip":"8.8.8.8",
	}
}

YOUR SERVER RESPONSE

In order to accept the delivery reports, your server must respond with HTTP status code 200 OK. If you cannot process the data at this time, for example, due to a database problem, you can return any other error such as status code 500. If a status code other than 200 is received, the request will be retried every 30 minutes for a period of 6 hours.

RECEIVE SMS

To get started the first thing you need to do is buying a virtual number. This you can do in the panel. 

NOTE
To use this method you need to specify the url callback in your account.

REQUEST TO YOUR SERVER

When we receive sms from the operator we will send it to your server instantly in batches, so each request can contain up to 1,000 messages in a JSON format.

PARAMETERS

sms_id The message id.
from The sender of the originator.
to The destination number, this is your virtual number.
text The content of the message.
sms_date Date & time when we received the message from the operator, in the format YYYY-MM-DD HH:MM:SS.

JSON 

[
    {
        "sms_id":"034d2acec0eb44af842de6a00bf4d934",
        "from":"34666666666",
        "to":"34666666667",
        "text":"Hello 1!",
        "sms_date":"2015-06-02 01:43:47"
    },
    {
        "sms_id":"034d2acec0eb44af842de6a00bf4d892",
        "from":"34666666666",
        "to":"34666666667",
        "text":"Hello 2!",
        "sms_date":"2015-06-02 01:45:03"
    }
]

Two messages sent to your server

YOUR SERVER RESPONSE

In order to accept the incoming messages, your server must respond with HTTP status code 200 OK. If you cannot process the data at this time, for example, due to a database problem, you can return any other error such as status code 500. If a status code other than 200 is received, the request will be retried every 30 minutes for a period of 6 hours

HLR SERVICE (LOOKUP)

With this method you can verify a mobile number in international format (msisdn). It will return the status of the desired number, including its validity, network and succint portability information. The HLR validation has a cost of 0.005€ per number.

ENDPOINT

https://api.gateway360.com/api/hlr/request

REQUEST

PARAMETERS

api_key Your API Key.
msisdn A mobile number in msisdn format.
Mandatory

JSON 

{
" api_key ": "399d2b438a53ebed3db8a7d52107f846" ,
" msisdn ": "34666666667"
}

PHP 

$request = '{
"api_key":"399d2b438a53ebed3db8a7d52107f846",
"msisdn":"34666666667"
}' ;
$headers = array( 'Content-Type: application/json' );
$ch = curl_init( 'https://api.gateway360.com/api/hlr/request' );
curl_ setopt ( $ch , CURLOPT_POST, 1 );
curl_ setopt ( $ch , CURLOPT_RETURNTRANSFER, true );
curl_ setopt ( $ch , CURLOPT_HTTPHEADER, $headers );
curl_ setopt ( $ch , CURLOPT_POSTFIELDS, $request );
$result = curl_ exec ( $ch );
if (curl_errno( $ch ) != 0 ){
die( "curl error: " .curl_errno( $ch ));
}

JAVA 

/** Imports */
import org.apache.http.HttpResponse;
import org.apache.http.client.HttpClient;
import org.apache.http.client.methods.HttpPost;
import org.apache.http.entity.StringEntity;
import org.apache.http.impl.client.HttpClientBuilder;
/** End imports */
HttpClient httpClient = HttpClientBuilder.create().build();
HttpPost request = new HttpPost( "https://api.gateway360.com/api/hlr/request" );
StringEntity params = new StringEntity(
"{" +
" \"api_key\":\"399d2b438a53ebed3db8a7d52107f846\"," +
" \"msisdn\":\"34666666667\"" +
"}" );
request.addHeader( "content-type" , "application/json" );
request.addHeader( "Accept" , "application/json" );
request.setEntity(params);
HttpResponse response = httpClient.execute(request);

RESPONSE

PARAMETERS

status Status of request - either "ok" or "error"
msisdn Requested number.
success If the number lookup was successful. True or false.
mccmnc Mobile Country Code (first 3 characters) and Mobile Network Code.
original_network Mobile network the number belongs to.
error_id In case of status being "error", this param will contain the error id.
error_msg In case of status being "error", this param will contain additional information. Should only be used for debugging.

EXAMPLES

200 OK 

{
 " status ": "ok" ,
 " result ":
 {
 "msisdn":"34666666666",
 "success":true,
 "mccmnc":"21403",
 "original_network":"MNO - Vodafone Espana",
 "ported":false
 }
}

One number lookup without portability

200 OK 

{
 " status ": "ok" ,
 " result ":
 {
 "msisdn":"34666666666",
 "success":true,
 "mccmnc":"21403",
 "original_network":"MNO - Movistar (Telefonica Moviles Espana)",
 "ported":true,
 "ported_network":"MNO - Orange Espana"
 }
}

One number lookup with portability

200 OK 

{
 " status ": "ok" ,
 " result ":
 {
 "msisdn":"34666666665",
 "success":false
 }
}

One number lookup about a number that is incorrect

400 Bad Request 

{
 " status ": "error" ,
 " error_id ": "JSON_PARSE_ERROR" ,
 " error_msg ": "Your JSON was formatted incorrectly."
}

We couldn't process your request.

ERRORS

Error ID Explanation
INVALID_CONTENT_TYPE The content type must be: Content-Type: application/json
JSON_PARSE_ERROR https://jsonlint.com/
MISSING_PARAMS Your request is incomplete and missing some mandatory parameters.
UNAUTHORIZED Your API key may be invalid, double-check that your API key was input correctly or see if the IP is blocked in your account API settings.
NOT_ENOUGH_BALANCE Your account has no funds to process this request, add credits to your account and try again.
SERVICE_UNAVAILABLE Service temporarily unavailable, try again later.

FACTOR AUTHENTICATION FLOW

Two-factor authentication (also known as 2FA) is a method of confirming a User's claimed identity by utilizing a combination of two different components. These components may be something that the User knows, something that the User possesses or something that is inseparable from the User (phone). In the next image we can see how the flow works in 2FA:

12FAF.PNG

FLOW

In this image we can see the flow process:

1. The User specify his number in your App.
2. Your App sends a Request PIN to our platform.
2.1 (optional) Te platform make a HLR request to the Operator to check if the number is valid. This step is optional, if you don't want us to make a HLR request you just have to specify in the params of the step 2.
2.2 (optional) The Operator responds immediately with the results of the HLR Lookup. This step is optional, we recommend to do this step because in case it is an invalid number all the flow will stop in the step 3, so you can save money because we don't need to send the SMS with the PIN.
3. The platform responds to your request with the results, in case we did a HLR Lookup and It was an invalid number we will let you know in this reply, in case the number is valid we will continue with the flow.
4. The platform sends the SMS with the PIN to the Operator.
5. The Operator sends the SMS with the PIN to the User.
6. The Operator sends the Delivery Report to our platform.
7. (optional) The platform sends the Delivery Report to your App. The Delivery Report tells you if the message was delivered or not. This param is optional, you can specify in the step 2 in what URL do you want to receive the Delivery Report. Check format here.
8. User enters the PIN in your App.
9. Your App sends to our platform a Verify PIN request.
10. The platform responds with the result of the verification, only one time is possible to be verified. In the step 2 you can specify expiration, number of tries...

REQUEST PIN

Use this method to start the authentication process. Submit a mobile number in international format (MSISDN) to make the system send a verification SMS with a PIN code to that user on your behalf. You will later be able to verify the user's identity with that PIN code. If you send multiple requests for the same number, only the last PIN code generated will be valid, i.e. only the last SMS will allow the user to complete the authentication process.

ENDPOINT

https://api.gateway360.com/api/2fa/request

REQUEST

Parameters

api_key Your API Key.
msisdn Mobile number to verify in international format (must include country calling code).
sender Sender field for the SMS (max 15 numeric or 11 alphanumeric characters).
hlr_lookup Perform a HLR lookup to guarantee the validity of the MSISDN provided. Use this parameter to avoid the SMS being sent to invalid numbers. If set to 1 the operation will fail if the HLR query fails. Possible values 1 or 0. Defaults to 1.
sms_text Text for the SMS. If specified, it must contain the placeholder string {PIN} exactly once, to be replaced by the generated PIN code. Max SMS length is 160 characters minus the length of the PIN code.
report_url Callback url to receive the SMS delivery report (DLR). For details on the format of this dlr, see Get Reports (Callback). Note that this delivery report only contains the status of the SMS sent to the user, not the actual verification process.
pin_params
type Type of characters for the generated PIN code. Allowed values are numeric, alpha and alphanumeric. Letters will always be uppercase. Defaults to numeric.
length Length of the generated PIN code. Between 4 and 16. Defaults to 6.
expires_in Seconds until the PIN code expires and is rendered invalid. 0 for unlimited validity (not recommended). Defaults to 3600 (1 hour).
max_tries Maximum number of failed confirmation attempts before the code is rendered invalid permanently. 0 for unlimited retries (not recommended). Defaults to 3.

JSON

{
    "api_key":"399d2b438a53ebed3db8a7d52107f846",
    "msisdn":"34666666111",
    "sender":"GOOD PIZZA",
    "hlr_lookup":1
}

PHP

$request = '{
    "api_key":"399d2b438a53ebed3db8a7d52107f846",
    "msisdn":"34666666111",
    "sender":"GOOD PIZZA",
    "hlr_lookup":1
}';
        	
$headers = array('Content-Type: application/json');        	

$ch = curl_init('https://api.gateway360.com/api/2fa/request');
curl_setopt($ch, CURLOPT_POST, 1);
curl_setopt($ch, CURLOPT_RETURNTRANSFER,true);
curl_setopt($ch, CURLOPT_HTTPHEADER, $headers);
curl_setopt($ch, CURLOPT_POSTFIELDS, $request);

$result = curl_exec($ch);
 
if (curl_errno($ch) != 0 ){
	die("curl error: ".curl_errno($ch));
}

Java

/** Imports */
import org.apache.http.HttpResponse;
import org.apache.http.client.HttpClient;
import org.apache.http.client.methods.HttpPost;
import org.apache.http.entity.StringEntity;
import org.apache.http.impl.client.HttpClientBuilder;
/** End imports */


HttpClient httpClient = HttpClientBuilder.create().build();
HttpPost request = new HttpPost("https://api.gateway360.com/api/2fa/request");

StringEntity params = new StringEntity(
"{" +
"    \"api_key\":\"399d2b438a53ebed3db8a7d52107f846\"," +
"    \"msisdn\":\"34666666111\"," +
"    \"sender\":\"GOOD PIZZA\"," +
"    \"hlr_lookup\":1" +
"}");

request.addHeader("content-type", "application/json");
request.addHeader("Accept","application/json");
request.setEntity(params);
HttpResponse response = httpClient.execute(request);
.asString();

RESPONSE

Parameters

status Final status of request - either "ok" or "error"
error_id In case of status being "error", this will indicate the error code.
error_msg In case of status being "error", this param will contain additional information. Should only be used for debugging.

Example 1

200 OK
{
    "status":"ok"
}
Two messages successfully processed

Example 2

200 OK
{
    "status":"error",
    "error_id":"INVALID_NUMBER",
    "error_msg":"HLR query returned error."
}
We didn't continue processing your request because the MSISDN wasn't valid.

Example 3

401 Unauthorized
{
    "status":"error",
    "error_id":"UNAUTHORIZED",
    "error_msg":"Your API key may be invalid or your IP is blocked."
}
We didn't continue processing your request because your API Key wasn't valid.

Example 3

400 Bad Request
{
    "status":"error",
    "error_id":"JSON_PARSE_ERROR",
    "error_msg":"Your JSON was formatted incorrectly."
}
We couldn't process your request.

ERRORS

Error ID Explanation
INVALID_CONTENT_TYPE The content type must be: Content-Type: application/json
JSON_PARSE_ERROR Your JSON was formatted incorrectly or was considered otherwise improper or incomplete. Check it here.
MISSING_PARAMS Your request is incomplete and missing some mandatory parameters.
BAD_PARAMS One or more of your parameters has incorrect format or value.
UNAUTHORIZED Your API key may be invalid, double-check that your API key was input correctly or see if the IP is blocked in your account API settings.
INVALID_HLR_LOOKUP_PARAM Invalid hlr_lookup param provided.
INVALID_PIN_PARAMS Invalid pin configuration parameters provided.
INVALID_SMS_TEXT The SMS text was deemed invalid. Either too long or mising the {PIN} placeholder.
INVALID_SENDER The sender address (from parameter) was not allowed for this message.
INVALID_NUMBER HLR query returned error. The number must be in MSISDN format. Check format here.
NOT_ENOUGH_BALANCE Your account has no funds to process this request, add credits to your account and try again.
UNKNOWN_ERROR The system threw an unknown error.

VERIFY PIN

Use this method to verify the PIN code provided by a user. Submit the number (msisdn) along the PIN code that was previously delivered to them via SMS with the 'Request' method to verify against our records.

In order for verification to succeed, you must provide a valid MSISDN-PIN pair that has not expired nor exhausted its allowed maximum validation attempts, as per the settings specified with the 'Request' method.

If verification fails a number of times greater than was specified with the max_tries setting (3 by default), the PIN code will be rendered invalid

ENDPOINT

https://api.gateway360.com/api/2fa/verify

REQUEST

Parameters
api_key Your API Key.
msisdn A mobile number that has previously requested verification.
pin The verification pin received by the user.
JSON
{
    "api_key":"399d2b438a53ebed3db8a7d52107f846",
    "msisdn":"34666666111",
    "pin":"581365"
}
PHP
$request = '{
    "api_key":"399d2b438a53ebed3db8a7d52107f846",
    "msisdn":"34666666111",
    "pin":"581365"
}';
        	
$headers = array('Content-Type: application/json');        	

$ch = curl_init('https://api.gateway360.com/api/2fa/verify');
curl_setopt($ch, CURLOPT_POST, 1);
curl_setopt($ch, CURLOPT_RETURNTRANSFER,true);
curl_setopt($ch, CURLOPT_HTTPHEADER, $headers);
curl_setopt($ch, CURLOPT_POSTFIELDS, $request);

$result = curl_exec($ch);
 
if (curl_errno($ch) != 0 ){
	die("curl error: ".curl_errno($ch));
}
Java
/** Imports */
import org.apache.http.HttpResponse;
import org.apache.http.client.HttpClient;
import org.apache.http.client.methods.HttpPost;
import org.apache.http.entity.StringEntity;
import org.apache.http.impl.client.HttpClientBuilder;
/** End imports */


HttpClient httpClient = HttpClientBuilder.create().build();
HttpPost request = new HttpPost("https://api.gateway360.com/api/2fa/verify");

StringEntity params = new StringEntity(
"{" +
"    \"api_key\":\"399d2b438a53ebed3db8a7d52107f846\"," +
"    \"msisdn\":\"34666666111\"," +
"    \"pin\":\"581365\"" +
"}");

request.addHeader("content-type", "application/json");
request.addHeader("Accept","application/json");
request.setEntity(params);
HttpResponse response = httpClient.execute(request);
.asString();

RESPONSE

Parameters

status Final request status - either "ok" or "error"
result In case of status being "ok", result will contain details about the operation
verified true or false
previously_verified Only if verified is true. Indicates whether the PIN has already been verified at least once
tries_remaining Only if verified is false and the max_tries setting is not 0. Indicates the number of attempts remaining to verify the specified msisdn.
message A human readable message explaining the obtained result.
error_id In case of status being "error", this param will contain the error id.
error_msg In case of status being "error", this param will contain additional information. Should only be used for debugging

Examples

200 OK 

{
" status ": "ok" ,
" result ":
{
"verified":true,
"previously_verified":false,
"message":"PIN code verified."
 }
}

User successfully verified

200 OK 

{
" status ": "ok" ,
" result ":
{
"verified":false,
"tries_remaining":2,
"message":"Invalid PIN code."
 }
}

Unsuccesful verification. 2 Tries remaining.

401 Unauthorized 

{
 " status ": "error" ,
 " error_id ": "UNAUTHORIZED" ,
 " error_msg ": "Your API key may be invalid or your IP is blocked."
}

We didn't continue processing your request because your API Key wasn't valid.

400 Bad Request 

{
 " status ": "error" ,
 " error_id ": "INVALID_CONTENT_TYPE" ,
 " error_msg ": "Invalid Content-Type; must be application/json."
}

We couldn't process your request.

ERRORS

Error ID Explanation
INVALID_CONTENT_TYPE The content type must be: Content-Type: application/json
JSON_PARSE_ERROR https://jsonlint.com/
MISSING_PARAMS Your request is incomplete and missing some mandatory parameters.
BAD_PARAMS One or more of your parameters has incorrect format or value.
UNAUTHORIZED Your API key may be invalid, double-check that your API key was input correctly or see if the IP is blocked in your account API settings.
RECORD_NOT_FOUND No valid record found for the specified MSISDN-PIN pair.
NOT_VERIFIED The verification pin is invalid.

ACCOUNT

GET BALANCE

Check your account balance or a subaccount balance.

ENDPOINT

https://api.gateway360.com/api/3.0/account/get-balance

REQUEST

PARAMETERS

api_key Your API Key

JSON 

{
 " api_key ": "399d2b438a53ebed3db8a7d52107f846"
}

PHP 

$request = '{
 "api_key":"399d2b438a53ebed3db8a7d52107f846"
}' ;
$headers = array( 'Content-Type: application/json' );
$ch = curl_init( 'https://api.gateway360.com/api/3.0/account/get-balance' );
curl_ setopt ( $ch , CURLOPT_POST, 1 );
curl_ setopt ( $ch , CURLOPT_RETURNTRANSFER, true );
curl_ setopt ( $ch , CURLOPT_HTTPHEADER, $headers );
curl_ setopt ( $ch , CURLOPT_POSTFIELDS, $request );
$result = curl_ exec ( $ch );
if ( !curl_errno( $ch ) )
 $result = json_decode( $result );
else
 $result = curl_error( $ch );

print _r( $result );

JAVA 

/** Imports */
import org.apache.http.HttpResponse;
import org.apache.http.client.HttpClient;
import org.apache.http.client.methods.HttpPost;
import org.apache.http.entity.StringEntity;
import org.apache.http.impl.client.HttpClientBuilder;
/** End imports */
HttpClient httpClient = HttpClientBuilder.create().build();
HttpPost request = new HttpPost( "https://api.gateway360.com/api/3.0/account/ge
t-balance" );
StringEntity params = new StringEntity(
"{" +
" \"api_key\":\"399d2b438a53ebed3db8a7d52107f846\"" +
"}" );
request.addHeader( "content-type" , "application/json" );
request.addHeader( "Accept" , "application/json" );
request.setEntity(params);
HttpResponse response = httpClient.execute(request);

RESPONSE

PARAMETERS

status The sending status of request - either "ok", "error"
result Object with the result.
balance The balance amount of your account, not that it's with 4 decimals, Ex: 155.2493
currency Either EUR, USD, GBP, CREDITS, SMS, ...
error_id In case the status values "error" we will indicate you here the error id.
error_msg In case the status values "error" this param has additional information. This param should be use just for debugging.

EXAMPLE 1

200 OK 

{
 " status ": "ok" ,
 " result ": {
 "balance":"350.1234",
 "currency":"EUR"
 }
}

Your account has 350,12 €

ERRORS

Error ID Explanation
INVALID_CONTENT_TYPE The content type must be: Content-Type: application/json
JSON_PARSE_ERROR Your JSON was formatted incorrectly or was considered otherwise improper or incomplete. https://jsonlint.com/
MISSING_PARAMS Your request is incomplete and missing some mandatory parameters
UNAUTHORIZED Your API key may be invalid, double-check that your API key was input correctly or see if your current IP is blocked in your account API settings.

GET PRICING

Check your account pricing

Pricing for a given country

ENDPOINT

https://api.gateway360.com/api/3.0/account/pricing/sms/get-country-pricing

REQUEST

PARAMETERS

api_key Your API Key.
country_code A country in ISO alpha2 format. If the parameter isn't passed, all countries will be returned
Mandatory
Optional

JSON 

{
 " api_key ": "399d2b438a53ebed3db8a7d52107f846" ,
 " country_code ": "ES" ,
}

PHP 

$request = '{
 "api_key":"399d2b438a53ebed3db8a7d52107f846",
 "country_code":"ES",
}' ;
$headers = array( 'Content-Type: application/json' ); 
$ch = curl_init( 'https://api.gateway360.com/api/3.0/account/pricing/sms/get-cou
ntry-pricing' );
curl_ setopt ( $ch , CURLOPT_POST, 1 );
curl_ setopt ( $ch , CURLOPT_RETURNTRANSFER, true );
curl_ setopt ( $ch , CURLOPT_HTTPHEADER, $headers );
curl_ setopt ( $ch , CURLOPT_POSTFIELDS, $request );
$result = curl_ exec ( $ch );
if ( !curl_errno( $ch ) )
 $result = json_decode( $result );
else
 $result = curl_error( $ch );

print _r( $result );

JAVA 

/** Imports */
import org.apache.http.HttpResponse;
import org.apache.http.client.HttpClient;
import org.apache.http.client.methods.HttpPost;
import org.apache.http.entity.StringEntity;
import org.apache.http.impl.client.HttpClientBuilder;
/** End imports */
HttpClient httpClient = HttpClientBuilder.create().build();
HttpPost request = new HttpPost( "https://api.gateway360.com/api/3.0/account/ge
t-balance" );
StringEntity params = new StringEntity(
"{" +
" \"api_key\":\"399d2b438a53ebed3db8a7d52107f846\"" +
" \"country_code\":\"ES\"" +
"}" );
request.addHeader( "content-type" , "application/json" );
request.addHeader( "Accept" , "application/json" );
request.setEntity(params);
HttpResponse response = httpClient.execute(request);
RESPONSE

PARAMETERS

status Status of request - either "ok" or "error"
name Name of the country.
prefix Prefix for that country.
networks Available networks for that country.
code Mobile Country Code (first 3 characters) and Mobile Network Code.
network Specific network.
price Price for that network.
error_id In case of status being "error", this param will contain the error id.
error_msg In case of status being "error", this param will contain additional information. Should only be used for debugging.

EXAMPLE

200 OK 

{
 " status ": "ok" ,
 " result ": {
 "ES":{
"name":"Spain",
"prefix":"34",
"networks":{
"0":{
"code":"21401",
"network":"MNO - Vodafone Espana",
"price":"0.0520"
},
"1":{
"code":"21403",
"network":"MNO - Orange Espana",
"price":"0.0520"
},
"2":{
"code":"21407",
"network":"MNO - Movistar (Telefonica Moviles Esp
ana)",
"price":"0.0520"
},
"3":{
"code":"21404",
"network":"MNO - Yoigo (Xfera Moviles)",
"price":"0.0520"
}
}
}
 }
}
ERRORS
Error ID Explanation
INVALID_CONTENT_TYPE The content type must be: Content-Type: application/json
JSON_PARSE_ERROR Your JSON was formatted incorrectly or was considered otherwise improper or incomplete. https://jsonlint.com/
MISSING_PARAMS Your request is incomplete and missing some mandatory parameters.
UNAUTHORIZED Your API key may be invalid, double-check that your API key was input correctly or see if your current IP is blocked in your account API settings.

Pricing for a given prefix

ENDPOINT

https://api.gateway360.com/api/3.0/account/pricing/sms/get-prefix-pricing

REQUEST

JSON 

{
 " api_key ": "399d2b438a53ebed3db8a7d52107f846" ,
 " prefix ": "34" ,
}

PHP 

$request = '{
 "api_key":"399d2b438a53ebed3db8a7d52107f846",
 "prefix":"34",
}' ;
$headers = array( 'Content-Type: application/json' );
$ch = curl_init( 'https://api.gateway360.com/api/3.0/account/pricing/sms/get-pre
fix-pricing' );
curl_ setopt ( $ch , CURLOPT_POST, 1 );
curl_ setopt ( $ch , CURLOPT_RETURNTRANSFER, true );
curl_ setopt ( $ch , CURLOPT_HTTPHEADER, $headers );
curl_ setopt ( $ch , CURLOPT_POSTFIELDS, $request );
$result = curl_ exec ( $ch );
if ( !curl_errno( $ch ) )
 $result = json_decode( $result );
 else
 $result = curl_error( $ch );
print _r( $result );

JAVA 

/** Imports */
import org.apache.http.HttpResponse;
import org.apache.http.client.HttpClient;
import org.apache.http.client.methods.HttpPost;
import org.apache.http.entity.StringEntity;
import org.apache.http.impl.client.HttpClientBuilder;
/** End imports */
HttpClient httpClient = HttpClientBuilder.create().build();
HttpPost request = new HttpPost( "https://api.gateway360.com/api/3.0/account/ge
t-balance" );
StringEntity params = new StringEntity(
"{" +
" \"api_key\":\"399d2b438a53ebed3db8a7d52107f846\"" +
" \"prefix\":\"34\"" +
"}" );
request.addHeader( "content-type" , "application/json" );
request.addHeader( "Accept" , "application/json" );
request.setEntity(params);
HttpResponse response = httpClient.execute(request);

RESPONSE

RESPONSE

status Status of request - either "ok" or "error"
name Name of the country.
prefix Prefix for that country
networks Available networks for that country
code Mobile Country Code (first 3 characters) and Mobile Network Code.
network Specific network.
price Price for that network.
error_id In case of status being "error", this param will contain the error id
error_msg In case of status being "error", this param will contain additional information. Should only be used for debugging.

EXAMPLE

200 OK 

{
 " status ": "ok" ,
 " result ": {
 "ES":{
"name":"Spain",
"prefix":"34",
"networks":{
"0":{
"code":"21401",
"network":"MNO - Vodafone Espana",
"price":"0.0520"
},
"1":{
"code":"21403",
"network":"MNO - Orange Espana",
"price":"0.0520"
},
"2":{
"code":"21407",
"network":"MNO - Movistar (Telefonica Moviles Esp
ana)",
"price":"0.0520"
},
"3":{
"code":"21404",
"network":"MNO - Yoigo (Xfera Moviles)",
"price":"0.0520"
}
}
}
 }
}

ERRORS

Error ID Explanation
INVALID_CONTENT_TYPE The content type must be: Content-Type: application/json
JSON_PARSE_ERROR Your JSON was formatted incorrectly or was considered otherwise improper or incomplete. https://jsonlint.com/
MISSING_PARAMS Your request is incomplete and missing some mandatory parameters
UNAUTHORIZED Your API key may be invalid, double-check that your API key was input correctly or see if your current IP is blocked in your account API settings.


SUBACCOUNT

GET BALANCE

Check your subaccount balance.


ENDPOINT

https://api.gateway360.com/api/3.0/subaccount/get-balance


REQUEST

Parameters
api_key Parent account API Key.
user_name Username of a subaccount.
JSON
{
    "api_key":"399d2b438a53ebed3db8a7d52107f846",
    "user_name":"subaccount_user_name"
}
PHP
$request = '{
    "api_key":"399d2b438a53ebed3db8a7d52107f846",
    "user_name":"subaccount_user_name"
}';

$headers = array('Content-Type: application/json');            

$ch = curl_init('https://api.gateway360.com/api/3.0/subaccount/get-balance');

curl_setopt($ch, CURLOPT_POST, 1);
curl_setopt($ch, CURLOPT_RETURNTRANSFER,true);
curl_setopt($ch, CURLOPT_HTTPHEADER, $headers);
curl_setopt($ch, CURLOPT_POSTFIELDS, $request);

$result = curl_exec($ch);

if( !curl_errno($ch) )
    $result = json_decode($result);
else
    $result = curl_error($ch);
    
print_r($result);
Java
/** Imports */
import org.apache.http.HttpResponse;
import org.apache.http.client.HttpClient;
import org.apache.http.client.methods.HttpPost;
import org.apache.http.entity.StringEntity;
import org.apache.http.impl.client.HttpClientBuilder;
/** End imports */


HttpClient httpClient = HttpClientBuilder.create().build();
HttpPost request = new HttpPost("https://api.gateway360.com/api/3.0/subaccount/get-balance");

StringEntity params = new StringEntity(
"{" +
"    \"api_key\":\"399d2b438a53ebed3db8a7d52107f846\"," +
"    \"user_name\":\"subaccount_user_name\"" +
"}");

request.addHeader("content-type", "application/json");
request.addHeader("Accept","application/json");
request.setEntity(params);
HttpResponse response = httpClient.execute(request);


RESPONSE

Parameters
status The sending status of request - either "ok", "error"
result Object with the result.
balance The balance amount of your subaccount, not that it's with 4 decimals, Ex: 155.2493
currency Either EUR, USD, GBP, CREDITS, SMS, ...
error_id In case the status values "error" we will indicate you here the error id.
error_msg In case the status values "error" this param has additional information. This param should be use just for debugging.
Example 1

200 OK 

{
    "status":"ok",
    "result":{
        "balance":"350.1234",
        "currency":"EUR"
    }
}
Your subaccount has 350,12 €


ERRORS

Error ID Explanation
INVALID_CONTENT_TYPE The content type must be: Content-Type: application/json
JSON_PARSE_ERROR Your JSON was formatted incorrectly or was considered otherwise improper or incomplete. Check it here.
MISSING_PARAMS Your request is incomplete and missing some mandatory parameters.
UNAUTHORIZED Your API key may be invalid, double-check that your API key was input correctly or see if your current IP is blocked in your account API settings.

ADD BALANCE

Add balance to a subaccount.


ENDPOINT

https://api.gateway360.com/api/3.0/subaccount/add-balance

REQUEST

Parameters
api_key Parent account API Key.
user_name Username of a subaccount.
amount Amount to add
JSON
{
    "api_key":"399d2b438a53ebed3db8a7d52107f846",
    "user_name":"subaccount_user_name",
    "amount":"150",
}
PHP
$request = '{
    "api_key":"399d2b438a53ebed3db8a7d52107f846",
    "user_name":"subaccount_user_name",
    "amount":"150",
}';

$headers = array('Content-Type: application/json');            

$ch = curl_init('https://api.gateway360.com/api/3.0/subaccount/add-balance');

curl_setopt($ch, CURLOPT_POST, 1);
curl_setopt($ch, CURLOPT_RETURNTRANSFER,true);
curl_setopt($ch, CURLOPT_HTTPHEADER, $headers);
curl_setopt($ch, CURLOPT_POSTFIELDS, $request);

$result = curl_exec($ch);

if( !curl_errno($ch) )
    $result = json_decode($result);
else
    $result = curl_error($ch);
    
print_r($result);
Java
/** Imports */
import org.apache.http.HttpResponse;
import org.apache.http.client.HttpClient;
import org.apache.http.client.methods.HttpPost;
import org.apache.http.entity.StringEntity;
import org.apache.http.impl.client.HttpClientBuilder;
/** End imports */


HttpClient httpClient = HttpClientBuilder.create().build();
HttpPost request = new HttpPost("https://api.gateway360.com/api/3.0/subaccount/add-balance");

StringEntity params = new StringEntity(
"{" +
"    \"api_key\":\"399d2b438a53ebed3db8a7d52107f846\"," +
"    \"user_name\":\"subaccount_user_name\"," +
"    \"amount\":\"150\"" +
"}");

request.addHeader("content-type", "application/json");
request.addHeader("Accept","application/json");
request.setEntity(params);
HttpResponse response = httpClient.execute(request);


RESPONSE

Parameters
status The sending status of request - either "ok", "error"
result Object with the result.
balance The new balance amount of your subaccount, not that it's with 4 decimals, Ex: 155.2493
currency Either EUR, USD, GBP, CREDITS, SMS, ...
error_id In case the status values "error" we will indicate you here the error id.
error_msg In case the status values "error" this param has additional information. This param should be use just for debugging.
Example 1

200 OK 

{
    "status":"ok",
    "result":{
        "balance":"350.1234",
        "currency":"EUR"
    }
}
Balance added. Your subaccount has now 350,12 €

ERRORS

Error ID Explanation
INVALID_CONTENT_TYPE The content type must be: Content-Type: application/json
JSON_PARSE_ERROR Your JSON was formatted incorrectly or was considered otherwise improper or incomplete. Check it here.
MISSING_PARAMS Your request is incomplete and missing some mandatory parameters.
INVALID_NAME Your username may be invalid or doesn't exist.
INVALID_AMOUNT The amount must be a positive number
UNAUTHORIZED Your API key may be invalid, double-check that your API key was input correctly or see if your current IP is blocked in your account API settings.


DEDUCT BALANCE

Deduct subaccount balance


ENDPOINT

https://api.gateway360.com/api/3.0/subaccount/deduct-balance


REQUEST

Parameters
api_key Parent account API Key.
user_name Username of a subaccount.
amount Amount to deduct


JSON
{
    "api_key":"399d2b438a53ebed3db8a7d52107f846",
    "user_name":"subaccount_user_name",
    "amount":"150",
}
PHP
$request = '{
    "api_key":"399d2b438a53ebed3db8a7d52107f846",
    "user_name":"subaccount_user_name",
    "amount":"150",
}';

$headers = array('Content-Type: application/json');            

$ch = curl_init('https://api.gateway360.com/api/3.0/subaccount/deduct-balance');

curl_setopt($ch, CURLOPT_POST, 1);
curl_setopt($ch, CURLOPT_RETURNTRANSFER,true);
curl_setopt($ch, CURLOPT_HTTPHEADER, $headers);
curl_setopt($ch, CURLOPT_POSTFIELDS, $request);

$result = curl_exec($ch);

if( !curl_errno($ch) )
    $result = json_decode($result);
else
    $result = curl_error($ch);
    
print_r($result);
Java
/** Imports */
import org.apache.http.HttpResponse;
import org.apache.http.client.HttpClient;
import org.apache.http.client.methods.HttpPost;
import org.apache.http.entity.StringEntity;
import org.apache.http.impl.client.HttpClientBuilder;
/** End imports */


HttpClient httpClient = HttpClientBuilder.create().build();
HttpPost request = new HttpPost("https://api.gateway360.com/api/3.0/subaccount/deduct-balance");

StringEntity params = new StringEntity(
"{" +
"    \"api_key\":\"399d2b438a53ebed3db8a7d52107f846\"," +
"    \"user_name\":\"subaccount_user_name\"," +
"    \"amount\":\"150\"" +
"}");

request.addHeader("content-type", "application/json");
request.addHeader("Accept","application/json");
request.setEntity(params);
HttpResponse response = httpClient.execute(request);


RESPONSE

Parameters
status The sending status of request - either "ok", "error"
result Object with the result.
balance The new balance amount of your subaccount, not that it's with 4 decimals, Ex: 155.2493
currency Either EUR, USD, GBP, CREDITS, SMS, ...
error_id In case the status values "error" we will indicate you here the error id.
error_msg In case the status values "error" this param has additional information. This param should be use just for debugging.
Example 1

200 OK 

{
    "status":"ok",
    "result":{
        "balance":"350.1234",
        "currency":"EUR"
    }
}
Balance deducted. Your subaccount has now 350,12 €

ERRORS

Error ID Explanation
INVALID_CONTENT_TYPE The content type must be: Content-Type: application/json
JSON_PARSE_ERROR Your JSON was formatted incorrectly or was considered otherwise improper or incomplete. Check it here.
MISSING_PARAMS Your request is incomplete and missing some mandatory parameters.
INVALID_NAME Your username may be invalid or doesn't exist.
INVALID_AMOUNT The amount must be a positive number
UNAUTHORIZED Your API key may be invalid, double-check that your API key was input correctly or see if your current IP is blocked in your account API settings.


GET INFO

Check your subaccount info

ENDPOINT

https://api.gateway360.com/api/3.0/subaccount/get-info


REQUEST

Parameters
api_key Parent account API Key.
user_name Username of a subaccount.
JSON
{
    "api_key":"399d2b438a53ebed3db8a7d52107f846",
    "user_name":"subaccount_user_name"
}
PHP
$request = '{
    "api_key":"399d2b438a53ebed3db8a7d52107f846",
    "user_name":"subaccount_user_name"
}';

$headers = array('Content-Type: application/json');            

$ch = curl_init('https://api.gateway360.com/api/3.0/subaccount/get-info');

curl_setopt($ch, CURLOPT_POST, 1);
curl_setopt($ch, CURLOPT_RETURNTRANSFER,true);
curl_setopt($ch, CURLOPT_HTTPHEADER, $headers);
curl_setopt($ch, CURLOPT_POSTFIELDS, $request);

$result = curl_exec($ch);

if( !curl_errno($ch) )
    $result = json_decode($result);
else
    $result = curl_error($ch);
    
print_r($result);
Java
/** Imports */
import org.apache.http.HttpResponse;
import org.apache.http.client.HttpClient;
import org.apache.http.client.methods.HttpPost;
import org.apache.http.entity.StringEntity;
import org.apache.http.impl.client.HttpClientBuilder;
/** End imports */


HttpClient httpClient = HttpClientBuilder.create().build();
HttpPost request = new HttpPost("https://api.gateway360.com/api/3.0/subaccount/get-info");

StringEntity params = new StringEntity(
"{" +
"    \"api_key\":\"399d2b438a53ebed3db8a7d52107f846\"," +
"    \"user_name\":\"subaccount_user_name\"" +
"}");

request.addHeader("content-type", "application/json");
request.addHeader("Accept","application/json");
request.setEntity(params);
HttpResponse response = httpClient.execute(request);


RESPONSE

Parameters
status The sending status of request - either "ok", "error"
result Object with the result.
user_name Subaccount username
email Subaccount email
balance The balance amount of your subaccount, not that it's with 4 decimals, Ex: 155.2493
currency Either EUR, USD, GBP, CREDITS, SMS, ...
error_id In case the status values "error" we will indicate you here the error id.
error_msg In case the status values "error" this param has additional information. This param should be use just for debugging.


Example 1

200 OK 

{
    "status":"ok",
    "result":{
	"user_name":"subaccount_user_name",
	"email":"me@email.com",
        "balance":"350.1234",
        "currency":"EUR"
    }
}
Your subaccount has 350,12 €


ERRORS

Error ID Explanation
INVALID_CONTENT_TYPE The content type must be: Content-Type: application/json
JSON_PARSE_ERROR Your JSON was formatted incorrectly or was considered otherwise improper or incomplete. Check it here.
MISSING_PARAMS Your request is incomplete and missing some mandatory parameters.
UNAUTHORIZED Your API key may be invalid, double-check that your API key was input correctly or see if your current IP is blocked in your account API settings.
Obtenido de «https://gigas.com/support/docs/index.php?title=API_SMS_Gigas&oldid=3009»