Diferencia entre revisiones de «API SMS Gigas»

De GIGAS DOCS
Saltar a: navegación, buscar
(→‎GET REPORTS (SMS LANDING))
Línea 1667: Línea 1667:
 
Once you have submitted a message and the message has been delivered to the handset, the operator responds with a delivery report. It could take seconds or 48 hours to receive the delivery report from the operator, depending on the network.
 
Once you have submitted a message and the message has been delivered to the handset, the operator responds with a delivery report. It could take seconds or 48 hours to receive the delivery report from the operator, depending on the network.
 
In addition, SMS Landing can send you reports whenever your client will open the landing page and when he click in any link, map or action button of the landing page.
 
In addition, SMS Landing can send you reports whenever your client will open the landing page and when he click in any link, map or action button of the landing page.
 +
 +
<pre>
 +
NOTE
 +
To use this method you need to specify the url callback in the param "report_url" when
 +
you send the message.
 +
</pre>
 +
 +
=== REQUEST TO YOUR SERVER ===
 +
 +
When we receive delivery reports we will send to your server instantly in batches, so each request can contain up to 1,000 delivery reports in a JSON format.
 +
 +
=== DLR REQUEST ===
 +
 +
==== Parameters ====
 +
 +
{| class=wikitable
 +
|Array of delivery reports founds.
 +
{| class=wikitable
 +
|sms_id The message id.
 +
|-
 +
|from
 +
|The sender of the message you sent.
 +
|-
 +
|to
 +
|The destination number of the message you sent.
 +
|-
 +
|custom
 +
|The custom value of the message you sent.
 +
|-
 +
|sms_date
 +
|The date & time of the message you sent in the format: YYYY-MM-DD HH:MM:SS
 +
|-
 +
|status
 +
|The status of the message, check the following table to see possible values.
 +
|-
 +
|dlr_date
 +
|The date & time of the status.
 +
|}
 +
|}
 +
 +
 +
==== JSON ====
 +
 +
<pre>
 +
[
 +
    {
 +
        "sms_id":"034d2acec0eb44af842de6a00bf4d934",
 +
        "from":"SUPERGOL",
 +
        "to":"34666666666",
 +
        "custom":"YourReferenceID-774843",
 +
        "sms_date":"2015-06-02 01:43:47",
 +
        "status":"DELIVRD",
 +
        "dlr_date":"2015-06-02 01:43:50"
 +
    },
 +
    {
 +
        "sms_id":"034d2acec0eb44af842de6a00bf4d892",
 +
        "from":"SUPERGOL",
 +
        "to":"34666666666",
 +
        "custom":"YourReferenceID-774849",
 +
        "sms_date":"2015-06-02 01:43:47",
 +
        "status":"DELIVRD",
 +
        "dlr_date":"2015-06-02 01:43:49"
 +
    }
 +
]
 +
</pre>
 +
:''Two delivery reports sent''
 +
 +
=== STATUS VALUES ===
 +
 +
{| class=wikitable
 +
|DELIVRD
 +
|Message delivered to destination.
 +
|-
 +
|ACCEPTD
 +
|Message is in accepted state, this state is temporary.
 +
|-
 +
|EXPIRED
 +
|Message validity period has expired, the expiration of a message is 48 hours if not specified.
 +
|-
 +
|DELETED
 +
|Message has been deleted due to the operator's reasons.
 +
|-
 +
|UNDELIV
 +
|Message wasn't delivered by SMSC, expiration, not reachable, operator problems, portability...
 +
|-
 +
|UNKNOWN
 +
|Message is in unknown state, the operator is trying, maybe the cellphone is turned off.
 +
|-
 +
|REJECTD
 +
|Message is in rejected state, the destination or the operator rejected the message.
 +
|}
 +
 +
=== LANDING OPEN REQUEST ===
 +
 +
==== Parameters ====
 +
 +
{| class=wikitable
 +
|sms_id
 +
|The message id.
 +
|-
 +
|msisdn
 +
|The destination number of the message you sent and who has opened the landing page.
 +
|-
 +
|timestamp
 +
|The datetime when your client has opened the landing in the format: YYYY-MM-DD HH:MM:SS.
 +
|-
 +
|ip
 +
|The ip from the landing page has been opened.
 +
|-
 +
|city
 +
|The city from the landing page has been opened.
 +
|-
 +
|device
 +
|The device OS (Operative System) from the landing page has been opened.
 +
|-
 +
|user_agent
 +
|The user_agent of the device from the landing page has been opened.
 +
|-
 +
|brand
 +
|The brand of the device from the landing page has been opened.
 +
|-
 +
|model
 +
|The model of the device from the landing page has been opened.
 +
|-
 +
|full_name
 +
|The model full name of the device from the landing page has been opened.
 +
|-
 +
|marketing_name
 +
|The marketing name of the device from the landing page has been opened.
 +
|}
 +
 +
==== JSON ====
 +
 +
<pre>
 +
{
 +
        "034d2acec0eb44af842de6a00bf4d934":
 +
{
 +
"msisdn":"34666666666",
 +
"timestamp":"2017-08-07 17:05:35",
 +
"ip":"8.8.8.8",
 +
"city":"Madrid",
 +
"device":"Android",
 +
"user_agent":"Mozilla/5.0 (Linux; Android 7.0; SAMSUNG SM-G950F Build/NRD90M) AppleWebKit/537.36",
 +
"brand":"Samsung",
 +
"model":"Galaxy S8",
 +
"full_name":"Samsung Galaxy S8",
 +
"marketing_name":"SAMSUNG SM-G950F"
 +
}
 +
}
 +
</pre>
 +
 +
=== LANDING CLICK REQUEST ===
 +
 +
==== Parameters ====
 +
 +
{|class=wikitable
 +
|sms_id
 +
|The message id.
 +
|-
 +
|msisdn
 +
|The destination number of the message you sent and who has opened the landing page.
 +
|-
 +
|timestamp
 +
|The datetime when your client has clicked the link in the format: YYYY-MM-DD HH:MM:SS.
 +
|-
 +
|click
 +
|The link (button, map, image...) which your client have clicked.
 +
|}
 +
 +
==== JSON ====
 +
 +
<pre>
 +
{
 +
        "034d2acec0eb44af842de6a00bf4d934":
 +
{
 +
"msisdn":"34666666666",
 +
"timestamp":"2017-08-07 17:06:15",
 +
"click":"https://yourpage.com/more-information",
 +
}
 +
}
 +
</pre>
 +
 +
===  YOUR SERVER RESPONSE ===
 +
 +
In order to accept the delivery reports, your server must respond with HTTP status code 200 OK. If you cannot process the data at this time, for example, due to a database problem, you can return any other error such as status code 500. If a status code other than 200 is received, the request will be retried every 30 minutes for a period of 6 hours.

Revisión del 20:42 3 dic 2021

GETTING STARTED

Welcome to API documentation. To integrate the API, you'll need some programming skills. If you’re ready to get started, read on.

JSON

For this version of our API we only support JSON. So instead of XML, HTTP POST parameters, or other serialization formats, all POST/PATCH requests require a valid JSON object for the body.

ENDPOINT

This is the URL you have to request where {app} is the application and {function} the function you want to call.

https://api.gateway360.com/api/3.0/{app}/{funcion}

AUTHENTICATION =

Most api requests will require authentication of the user account. This is always done through the API key associated with your account. You can find your API Key details in your account.

ENCODING

All the parameters must be encoded and they must be in UTF-8.

CONTENT TYPE

When you submit a request it's really important to set Content-Type: application/json

ERROR HANDLING

Plan to encounter errors of varying degrees. From an invalid request to the rare outage, you'll see the errors appear as an HTTP Response code. 400-series errors (code 400-499) indicate a bad request. Do not retry without fixing this error first. 500-series errors (500-599) indicate a problem on our servers.

SEND SMS

With this method you can send bulk SMS easily. This method has been extremely optimized to send more than 500.000 SMS in less than one hour.

ENDPOINT

https://api.gateway360.com/api/3.0/sms/send

REQUEST

Parameters

api_key
 Your API Key. 
messages
 Array of messages you want to send. 
from
 Originator address (sender). Up to 15 numeric or 11 alphanumeric characters. All characters non-ASCII will be replaced with its equivalent if exist any (á => a), empty in another case. 
to
 Destination mobile number in international format. Country code must be included.Ex: to=447525812121 when sending to UK. 
text
 Body of the text message (with a maximum length of 459 characters)
custom Include any reference string for your reference. Useful for your internal reports. Maximum 32 alphanumeric characters.
send_at When this message should be sent as timestamp in YYYY-MM-DD HH:MM:SS format. If you specify a time in the past, the message will be sent immediately.
report_url URL where you want to receive the delivery report (DLR).
concat Set to 1 if you want to allow concatenated messages (more than 160 characters). If concat is 0 (or it's not present) only first 160 chars will be sent.
encoding Set to UCS2 if you want to send messages UCS2 (70 Unicode characters per SMS) with accents, emoticons and special characters. If encoding is GSM7 (or it's not present) the SMS will be treated as GSM7 (160 non Unicode characters per SMS). The Unicode encoding is only applicable to the text of message.
fake Set to 1 if you want to simulate submitting messages, it's perfect for testing and debugging, it has no cost.

Tabla1.png

JSON

{
    "api_key":"399d2b438a53ebed3db8a7d52107f846",
    "report_url":"http://yourserver.com/callback/script",
    "concat":1,
    "messages":[
        {
            "from":"GOOD PIZZA",
            "to":"34666666111",
            "text":"Hi John, today 2x1 in pizzas, watch the game like a boss with our new pepperoni pizza!",
            "send_at":"2018-02-18 17:30:00"
        },
        {
            "from":"GOOD PIZZA",
            "to":"34666666112",
            "text":"Hi Maria, , today 2x1 in pizzas, watch the game like a boss with our new pepperoni pizza!",
            "custom":"MyMsgID-12345",
            "send_at":"2018-02-18 17:30:00"
        }
    ]
}

cURL

curl - X POST \
- H 'Content-Type: application/json' \
- H 'Accept: application/json' \
-d '{
 "api_key":"399d2b438a53ebed3db8a7d52107f846",
 "report_url":"http://yourserver.com/callback/script",
 "concat":1,
 "messages":[
 {
 "from":"GOOD PIZZA",
 "to":"34666666111",
 "text":"Hi John, today 2x1 in pizzas, watch the game like a boss
with our new pepperoni pizza!",
 "send_at":"2018-02-18 17:30:00"
 },
SEND SMS 8
 {
 "from":"GOOD PIZZA",
 "to":"34666666112",
 "text":"Hi Maria, , today 2x1 in pizzas, watch the game like a bo
ss with our new pepperoni pizza!",
 "custom":"MyMsgID-12345",
 "send_at":"2018-02-18 17:30:00"
 }
 ]
}' https: / /api.gateway360.com/api/3.0/sms/send

PHP

$request = '{
    "api_key":"399d2b438a53ebed3db8a7d52107f846",
    "report_url":"http://yourserver.com/callback/script",
    "concat":1,
    "messages":[
        {
            "from":"GOOD PIZZA",
            "to":"34666666111",
            "text":"Hi John, today 2x1 in pizzas, watch the game like a boss with our new pepperoni pizza!",
            "send_at":"2018-02-18 17:30:00"
        },
        {
            "from":"GOOD PIZZA",
            "to":"34666666112",
            "text":"Hi Maria, , today 2x1 in pizzas, watch the game like a boss with our new pepperoni pizza!",
            "custom":"MyMsgID-12345",
            "send_at":"2018-02-18 17:30:00"
        }
    ]
}';
        	
$headers = array('Content-Type: application/json');        	

$ch = curl_init('https://api.gateway360.com/api/3.0/sms/send');
curl_setopt($ch, CURLOPT_POST, 1);
curl_setopt($ch, CURLOPT_RETURNTRANSFER,true);
curl_setopt($ch, CURLOPT_HTTPHEADER, $headers);
curl_setopt($ch, CURLOPT_POSTFIELDS, $request);

$result = curl_exec($ch);
 
if (curl_errno($ch) != 0 ){
	die("curl error: ".curl_errno($ch));
}

Java

/** Imports */
import org.apache.http.HttpResponse;
import org.apache.http.client.HttpClient;
import org.apache.http.client.methods.HttpPost;
import org.apache.http.entity.StringEntity;
import org.apache.http.impl.client.HttpClientBuilder;
/** End imports */


HttpClient httpClient = HttpClientBuilder.create().build();
HttpPost request = new HttpPost("https://api.gateway360.com/api/3.0/sms/send");

StringEntity params = new StringEntity(
"{" +
"    \"api_key\":\"399d2b438a53ebed3db8a7d52107f846\"," +
"    \"report_url\":\"http://yourserver.com/callback/script\"," +
"    \"concat\":1," +
"    \"messages\":["  +
"		{"               +
"    		\"from\":\"GOOD PIZZA\"," +
"    		\"to\":\"34666666111\","  +
"    		\"text\":\"Hi John, today 2x1 in pizzas, watch the game like a boss with our new pepperoni pizza!\"," +
"    		\"send_at\":\"2018-02-18 17:30:00\""+
"		},"     +
"		{"               +
"    		\"from\":\"GOOD PIZZA\"," +
"    		\"to\":\"34666666112\","  +
"    		\"text\":\"Hi Maria, , today 2x1 in pizzas, watch the game like a boss with our new pepperoni pizza!\"," +
"    		\"send_at\":\"2018-02-18 17:30:00\""+
"		}"     +
"	]"  +
"}");

request.addHeader("content-type", "application/json");
request.addHeader("Accept","application/json");
request.setEntity(params);
HttpResponse response = httpClient.execute(request);

Ruby

require 'uri'
require 'net/http'

url = URI("https://api.gateway360.com/api/3.0/sms/send")

http = Net::HTTP.new(url.host, url.port)
http.use_ssl = true
http.verify_mode = OpenSSL::SSL::VERIFY_NONE

request = Net::HTTP::Post.new(url)
request["content-type"] = 'application/json'
request["accept"] = 'application/json'

request.body = '{
    "api_key":"399d2b438a53ebed3db8a7d52107f846",
    "report_url":"http://yourserver.com/callback/script",
    "concat":1,
    "messages":[
        {
            "from":"GOOD PIZZA",
            "to":"34666666111",
            "text":"Hi John, today 2x1 in pizzas, watch the game like a boss with our new pepperoni pizza!",
            "send_at":"2018-02-18 17:30:00"
        },
        {
            "from":"GOOD PIZZA",
            "to":"34666666112",
            "text":"Hi Maria, , today 2x1 in pizzas, watch the game like a boss with our new pepperoni pizza!",
            "custom":"MyMsgID-12345",
            "send_at":"2018-02-18 17:30:00"
        }
    ]
}'

response = http.request(request)
puts response.read_body

Python

conn = http.client.HTTPSConnection("api.gateway360.com")

payload = """{
    "api_key":"399d2b438a53ebed3db8a7d52107f846",
    "report_url":"http://yourserver.com/callback/script",
    "concat":1,
    "messages":[
        {
            "from":"GOOD PIZZA",
            "to":"34666666111",
            "text":"Hi John, today 2x1 in pizzas, watch the game like a boss with our new pepperoni pizza!",
            "send_at":"2018-02-18 17:30:00"
        },
        {
            "from":"GOOD PIZZA",
            "to":"34666666112",
            "text":"Hi Maria, , today 2x1 in pizzas, watch the game like a boss with our new pepperoni pizza!",
            "custom":"MyMsgID-12345",
            "send_at":"2018-02-18 17:30:00"
        }
    ]
}"""

headers = {
    'content-type': "application/json",
    'accept': "application/json"
    }

conn.request("POST", "/api/3.0/sms/send", payload, headers)

res = conn.getresponse()
data = res.read()

print(data.decode("utf-8"))

RESPONSE

Parameters

status The sending status of request - either "ok", "error"
result Array of results in the same order you submitted.
status The status of the message - either "ok", "error"
sms_id Operator message id (with a maximum length of 32 characters). This is helpful for delivery reports.
custom Custom field sent in request.
error_id In case the status values "error" this param gives you the error id.
error_msg In case the status values "error" this param has additional information. This param should be use just for debugging.
error_id In case the status values "error" we will indicate you here the error id.
error_msg In case the status values "error" this param has additional information. This param should be use just for debugging.

Example 1

200 OK
{
    "status":"ok",
    "result":[
        {
            "status":"ok",
            "sms_id":"1a8940dc7471427db3021cde5b464444",
            "custom":"test"
        },
        {
            "status":"ok",
            "sms_id":"1a8940dc7471427db3021cde5b464481",
            "custom":""
        }
    ]
}
Two messages successfully processed

Example 2

200 OK
{
    "status":"ok",
    "result":[
        {
            "status":"ok",
            "sms_id":"1a8940dc7471427db3021cde5b464444",
            "custom":"test"
        },
        {
            "status":"error",
            "error_id":"INVALID_SENDER",
            "error_msg":"Sender cannot exceed 11 alphanumeric or 15 numeric characters.",
            "custom":""
        },
        {
            "status":"error",
            "error_id":"INVALID_DESTINATION",
            "error_msg":"Destination number must be in international format.",
            "custom":"12345"
        },
        {
            "status":"error",
            "error_id":"NOT_ENOUGH_BALANCE",
            "error_msg":"Your account has no funds.",
            "custom":""
        },
        {
            "status":"error",
            "error_id":"INVALID_DATETIME",
            "error_msg":"Invalid datetime format.",
            "custom":""
        }
    ]
}
One message successfully processed, and the rest with several errors.

Example 3

401 Unauthorized
{
    "status":"error",
    "error_id":"UNAUTHORIZED",
    "error_msg":"Your API key may be invalid or your IP is blocked."
}
We didn't continue processing your request because your API Key wasn't valid.

Example 4

400 Bad Request
{
    "status":"error",
    "error_id":"JSON_PARSE_ERROR",
    "error_msg":"Your JSON was formatted incorrectly."
}
We couldn't process your request

ERRORS

Error ID Explanation
INVALID_CONTENT_TYPE The content type must be: Content-Type: application/json
JSON_PARSE_ERROR Your JSON was formatted incorrectly or was considered otherwise improper or incomplete. Check it here.
MISSING_PARAMS Your request is incomplete and missing some mandatory parameters.
BAD_PARAMS One or more of your parameters has incorrect format or value.
UNAUTHORIZED Your API key may be invalid, double-check that your API key was input correctly or see if the IP is blocked in your account API settings.
INVALID_SENDER The sender address (from parameter) was not allowed for this message.
INVALID_DESTINATION Our Gateway was unable to process your destination. The number must be in MSISDN format. Check format here.
INVALID_TEXT The field was empty or is corrupt.
INVALID_DATETIME The format we were expecting was: YYYY-MM-DD HH:MM:SS
NOT_ENOUGH_BALANCE Your account has no funds to process this request, add credits to your account and try again.
LIMIT_EXCEEDED Your request has exceeded the maximum of 1000 sms requests per batch.

SPECIAL LONG CHARACTERS

There are 9 special characters that are counted as 2 individual characters when GSM encoded. This could result in a message becoming longer and therefore being concatenated.The following table identifies these characters.

Symbol Name Symbol Name
[ Open square | Vertical bar
\ Backslash } Right brace
] Close square ~ Tilde
^ Caret € Euro symbol
{ Left brace

CONCATENATED GSM MESSAGES

Also referred to as a long message, multipart message or extended message, a concatenatedmessage is formed from several standard SMS containing a 7 byte concatenation header at the beginning of each one. Since this 7 byte header is within the message, it reduces the total size of each SMS to 153 characters each. The table below shows the maximum message length per number of SMS used for plain 7-bit messages. If you want to send a concatenated message, don’t forget you must set the parameter "concat" to value 1.

Number of SMS Maximum Message Length
1 160 characters.
2 306 characters.
3 459 characters.
4 612 characters.
5 765 characters.
6 918 characters.
7 1071 characters.
8 1224 characters.

GSM ENCODING

According to GSM specification, a standard SMS message can contain up to 140 bytes of data (payload). Standard latin (ISO-8859-1) character encoding represents a single character using 1 byte, which is 8 bits. Therefore, the maximum number of latin 1 characters that could be included in an sms is 140. GSM encoding represents characters using 7 bits instead of 8. This therefore provides a maximum of 160 characters per SMS. (140 * 8 bits) / 7 bits = 160 This effectively halves the number of characters that the GSM character set can support, compared to ISO-8859-1. In order to include common characters that are usually represented using the 8th bit, these characters as well as other symbol characters must be re-mapped to a combination of lower bits. These re-mapped characters are often referred to as special characters. This re-mapping, in combination with packing 7-bit characters into 8- bit bytes is called GSM Encoding. 

NOTE
The below table lists the 7-bit default alphabet as specified by GSM 03.38
Hex Character name Character ISO-8859-1 Hex
0x00 COMMERCIAL AT @ 40
0x01 POUND SIGN £ A3
0x02 DOLLAR SIGN $ 24
0x03 YEN SIGN ¥ A5
0x04 LATIN SMALL LETTER E WITH GRAVE è E8
0x05 LATIN SMALL LETTER E WITH ACUTE é E9
0x06 LATIN SMALL LETTER U WITH GRAVE ù F9
0x07 LATIN SMALL LETTER I WITH GRAVE ì EC
0x08 LATIN SMALL LETTER O WITH GRAVE ò F2
0x09 LATIN SMALL LETTER C WITH CEDILLA (casechanged) Ç C7
0x0A Line Feed A
0x0B LATIN CAPITAL LETTER O WITH STROKE Ø D8
0x0C LATIN SMALL LETTER O WITH STROKE ø F8
0x0D Carriage Return D
0x0E LATIN CAPITAL LETTER A WITH RING ABOVE Å C5
0x0F LATIN SMALL LETTER A WITH RING ABOVE å E5
0x10 GREEK CAPITAL LETTER Δ
0x11 LOW LINE _ 5F
0x12 GREEK CAPITAL LETTER Φ
0x13 GREEK CAPITAL LETTER Γ
0x14 GREEK CAPITAL LETTER Λ
0x15 GREEK CAPITAL LETTER Ω
0x16 GREEK CAPITAL LETTER Π
0x17 GREEK CAPITAL LETTER Ψ
0x18 GREEK CAPITAL LETTER Σ
0x19 GREEK CAPITAL LETTER Θ
0x1A GREEK CAPITAL LETTER Ξ
0x1B ESCAPE TO EXTENSION
0x1B0A FORM FEED 12
0x1B14 CIRCUMFLEX ACCENT ^ 5E
0x1B28 LEFT CURLY BRACKET { 7B
0x1B29 RIGHT CURLY BRACKET } 7D
0x1B2F REVERSE SOLIDUS (BACKSLASH) \ 5C
0x1B3C LEFT SQUARE BRACKET [ 5B
0x1B3D TILDE ~ 7E
0x1B3E RIGHT SQUARE BRACKET ] 5D
0x1B40 VERTICAL BAR | 7C
0x1B65 EURO SIGN € A4 (ISO-8859-15)
0x1C LATIN CAPITAL LETTER AE Æ C6
0x1D LATIN SMALL LETTER AE æ E6
0x1E LATIN SMALL LETTER SHARP S (German) ß DF
0x1F LATIN CAPITAL LETTER E WITH ACUTE É C9
0x20 SPACE 20
0x21 EXCLAMATION MARK ! 21
0x22 QUOTATION MARK " 22
0x23 NUMBER SIGN # 23
0x25 PERCENT SIGN % 25
0x26 AMPERSAND & 26
0x27 APOSTROPHE 27
0x28 LEFT PARENTHESIS ( 28
0x29 RIGHT PARENTHESIS ) 29
0x2A ASTERISK * 2A
0x2B PLUS SIGN + 2B
0x2C COMMA , 2C
0x2D HYPHEN-MINUS - 2D
0x2E FULL STOP . 2E
0x2F SOLIDUS (SLASH) / 2F
0x30 DIGIT ZERO 0 30
0x31 DIGIT ONE 1 31
0x32 DIGIT TWO 2 32
0x33 DIGIT THREE 3 33
0x34 DIGIT FOUR 4 34
0x35 DIGIT FIVE 5 35
0x36 DIGIT SIX 6 36
0x37 DIGIT SEVEN 7 37
0x38 DIGIT EIGHT 8 38
0x39 DIGIT NINE 9 39
0x3A COLON : 3A
0x3B SEMICOLON ; 3B
0x3C LESS-THAN SIGN < 3C
0x3D EQUALS SIGN = 3D
0x3E GREATER-THAN SIGN > 3E
0x3F QUESTION MARK ? 3F
0x40 INVERTED EXCLAMATION MARK ¡ A1
0x41 LATIN CAPITAL LETTER A A 41
0x42 LATIN CAPITAL LETTER B B 42
0x43 LATIN CAPITAL LETTER C C 43
0x44 LATIN CAPITAL LETTER D D 44
0x45 LATIN CAPITAL LETTER E E 45
0x46 LATIN CAPITAL LETTER F F 46
0x47 LATIN CAPITAL LETTER G G 47
0x48 LATIN CAPITAL LETTER H H 48
0x49 LATIN CAPITAL LETTER I I 49
0x4A LATIN CAPITAL LETTER J J 4A
0x4B LATIN CAPITAL LETTER K K 4B
0x4C LATIN CAPITAL LETTER L L 4C
0x4D LATIN CAPITAL LETTER M M 4D
0x4E LATIN CAPITAL LETTER N N 4E
0x4F LATIN CAPITAL LETTER O O 4F
0x50 LATIN CAPITAL LETTER P P 50
0x51 LATIN CAPITAL LETTER Q Q 51
0x52 LATIN CAPITAL LETTER R R 52
0x53 LATIN CAPITAL LETTER S S 53
0x54 LATIN CAPITAL LETTER T T 54
0x55 LATIN CAPITAL LETTER U U 55
0x56 LATIN CAPITAL LETTER V V 56
0x57 LATIN CAPITAL LETTER W W 57
0x58 LATIN CAPITAL LETTER X X 58
0x59 LATIN CAPITAL LETTER Y Y 59
0x5A LATIN CAPITAL LETTER Z Z 5A
0x5B LATIN CAPITAL LETTER A WITH DIAERESIS Ä C4
0x5C LATIN CAPITAL LETTER O WITH DIAERESIS Ö D6
0x5D LATIN CAPITAL LETTER N WITH TILDE Ñ D1
0x5E LATIN CAPITAL LETTER U WITH DIAERESIS Ü DC
0x5F SECTION SIGN § A7
0x60 INVERTED QUESTION MARK ¿ BF
0x61 LATIN SMALL LETTER A a 61
0x62 LATIN SMALL LETTER B b 62
0x63 LATIN SMALL LETTER C c 63
0x64 LATIN SMALL LETTER D d 64
0x65 LATIN SMALL LETTER E e 65
0x66 LATIN SMALL LETTER F f 66
0x67 LATIN SMALL LETTER G g 67
0x68 LATIN SMALL LETTER H h 68
0x69 LATIN SMALL LETTER I i 69
0x6A L ATIN SMALL LETTER J j 6A
0x6B LATIN SMALL LETTER K k 6B
0x6C LATIN SMALL LETTER L l 6C
0x6D LATIN SMALL LETTER M m 6D
0x6E LATIN SMALL LETTER N n 6E
0x6F LATIN SMALL LETTER O o 6F
0x70 LATIN SMALL LETTER P p 70
0x71 LATIN SMALL LETTER Q q 71
0x72 LATIN SMALL LETTER R r 72
0x73 LATIN SMALL LETTER S s 73
0x74 LATIN SMALL LETTER T t 74
0x75 LATIN SMALL LETTER U u 75
0x76 LATIN SMALL LETTER V v 76
0x77 LATIN SMALL LETTER W w 77
0x78 LATIN SMALL LETTER X x 78
0x79 LATIN SMALL LETTER Y y 79
0x7A LATIN SMALL LETTER Z z 7A
0x7B LATIN SMALL LETTER A WITH DIAERESIS ä E4
0x7C LATIN SMALL LETTER O WITH DIAERESIS ö F6
0x7D LATIN SMALL LETTER N WITH TILDE ñ F1
0x7E LATIN SMALL LETTER U WITH DIAERESIS ü FC
0x7F LATIN SMALL LETTER A WITH GRAVE à E0

UCS2 ENCODING

UCS2 is the Unicode format required for SMS, as opposed to the later format UTF-16. Since each UCS2 character requires 2 bytes, the SMS message length is reduced to 70 characters: 140 bytes / 2 bytes = 70 characters. You must also set the correct Data Coding Scheme value, 0 x 08 or 8 in the case of UCS2. UCS2 encoding allows the use of emoticons in SMS and these are treated as characters so you can write it in your SMS as any other character. Unicode messages can be concatenated. The concatenation headers reduce the characters available for content as follows:

Number of SMS Maximum Message Length
1 70 characters.
2 134 characters.
3 201 characters.
4 268 characters.
5 335 characters.
6 402 characters.
7 469 characters.
8 536 characters.


GET REPORTS

Once you have submitted a message and the message has been delivered to the handset, the operator responds with a delivery report. It could take seconds or 48 hours to receive the delivery report from the operator, depending on the network. 

NOTE
To use this method you need to specify the url callback in the param "report_url" when
you send the message.

REQUEST TO YOUR SERVER

When we receive delivery reports we will send to your server instantly in batches, so each request can contain up to 1,000 delivery reports in a JSON format.

Parameters

Array of delivery reports founds.
sms_id The message id.
from The sender of the message you sent.
to The destination number of the message you sent.
custom The custom value of the message you sent.
sms_date The date & time of the message you sent in the format: YYYY-MM-DD HH:MM:SS
status The status of the message, check the following table to see possible values.
dlr_date The date & time of the status.

JSON

[
    {
        "sms_id":"034d2acec0eb44af842de6a00bf4d934",
        "from":"SUPERGOL",
        "to":"34666666666",
        "custom":"YourReferenceID-774843",
        "sms_date":"2015-06-02 01:43:47",
        "status":"DELIVRD",
        "dlr_date":"2015-06-02 01:43:50"
    },
    {
        "sms_id":"034d2acec0eb44af842de6a00bf4d892",
        "from":"SUPERGOL",
        "to":"34666666666",
        "custom":"YourReferenceID-774849",
        "sms_date":"2015-06-02 01:43:47",
        "status":"DELIVRD",
        "dlr_date":"2015-06-02 01:43:49"
    }
]
Two delivery reports sent

STATUS VALUES

DELIVRD Message delivered to destination.
ACCEPTD Message is in accepted state, this state is temporary.
EXPIRED Message validity period has expired, the expiration of a message is 48 hours if not specified.
DELETED Message has been deleted due to the operator's reasons.
UNDELIV Message wasn't delivered by SMSC, expiration, not reachable, operator problems, portability...
UNKNOWN Message is in unknown state, the operator is trying, maybe the cellphone is turned off.
REJECTD Message is in rejected state, the destination or the operator rejected the message.


YOUR SERVER RESPONSE

In order to accept the delivery reports, your server must respond with HTTP status code 200 OK. If you cannot process the data at this time, for example, due to a database problem, you can return any other error such as status code 500. If a status code other than 200 is received, the request will be retried every 30 minutes for a period of 6 hours.

SEND SMS LANDING

With this method you can send bulk SMS Landing easily. This method has been extremely optimized to send more than 500.000 SMS in less than one hour. To send SMS Landing via API, you must first have it created in your account in your user panel, since you will need `landing_id` to send it.

Api sms1.png

ENDPOINT

https://api.gateway360.com/api/3.0/sms/send-landing

REQUEST

Parameters

api_key Your API Key.
messages Array of messages you want to send.
from Originator address (sender). Up to 15 numeric or 11 alphanumeric characters. All characters non-ASCII will be replaced with its equivalent if exist any (á => a), empty in another case.
to Destination mobile number in international format. Country code must be included.Ex: to=447525812121 when sending to UK.
text Body of the text message including the tag {LANDING} (with a maximum length of 459 characters). Ex: "Déjà vu, you can find it and more in our shop: {LANDING}"
custom Include any reference string for your reference. Useful for your internal reports. Maximum 32 alphanumeric characters.
send_at When this message should be sent as timestamp in YYYY-MM-DD HH:MM:SS format. If you specify a time in the past, the message will be sent immediately.
landing_id ID of the landing template created in your account.
campaign_name Name of the campaign in case your want to group more than one SMS in a unique campaign to see it in your panel (otherway no one campaign will be created).
report_url URL where you want to receive the delivery report (DLR) and the events of the landing as your client open it or click in some link or action.
concat Set to 1 if you want to allow concatenated messages (more than 160 characters). If concat is 0 (or it's not present) only first 160 chars will be sent.
encoding Set to UCS2 if you want to send messages UCS2 (70 Unicode characters per SMS) with accents, emoticons and special characters. If encoding is GSM7 (or it's not present) the SMS will be treated as GSM7 (160 non Unicode characters per SMS). The Unicode encoding is only applicable to the text of message.
fake Set to 1 if you want to simulate submitting messages, it's perfect for testing and debugging, it has no cost.

JSON

{
    "api_key":"399d2b438a53ebed3db8a7d52107f846",
    "report_url":"http://yourserver.com/callback/script",
    "landing_id":2749,
    "concat":1,
    "messages":[
        {
            "from":"GOOD PIZZA",
            "to":"34666666111",
            "text":"Hi John! See our new offers only available for you: {LANDING}",
            "send_at":"2018-02-18 17:30:00"
        },
        {
            "from":"GOOD PIZZA",
            "to":"34666666112",
            "text":"Hi Maria! See our new offers only available for you: {LANDING}",
            "custom":"MyMsgID-12345",
            "send_at":"2018-02-18 17:30:00"
        }
    ]
}

cURL

curl -X POST \
 -H 'Content-Type: application/json' \
 -H 'Accept: application/json' \
 -d '{
    "api_key":"399d2b438a53ebed3db8a7d52107f846",
    "report_url":"http://yourserver.com/callback/script",
    "landing_id":2749,
    "concat":1,
    "messages":[
        {
            "from":"GOOD PIZZA",
            "to":"34666666111",
            "text":"Hi John! See our new offers only available for you: {LANDING}",
            "send_at":"2018-02-18 17:30:00"
        },
        {
            "from":"GOOD PIZZA",
            "to":"34666666112",
            "text":"Hi Maria! See our new offers only available for you: {LANDING}",
            "custom":"MyMsgID-12345",
            "send_at":"2018-02-18 17:30:00"
        }
    ]
}' https://api.gateway360.com/api/3.0/sms/send-landing

PHP

$request = '{
    "api_key":"399d2b438a53ebed3db8a7d52107f846",
    "report_url":"http://yourserver.com/callback/script",
    "landing_id":2749,
    "concat":1,
    "messages":[
        {
            "from":"GOOD PIZZA",
            "to":"34666666111",
            "text":"Hi John! See our new offers only available for you: {LANDING}",
            "send_at":"2018-02-18 17:30:00"
        },
        {
            "from":"GOOD PIZZA",
            "to":"34666666112",
            "text":"Hi Maria! See our new offers only available for you: {LANDING}",
            "custom":"MyMsgID-12345",
            "send_at":"2018-02-18 17:30:00"
        }
    ]
}';
        	
$headers = array('Content-Type: application/json');        	

$ch = curl_init('https://api.gateway360.com/api/3.0/sms/send-landing');
curl_setopt($ch, CURLOPT_POST, 1);
curl_setopt($ch, CURLOPT_RETURNTRANSFER,true);
curl_setopt($ch, CURLOPT_HTTPHEADER, $headers);
curl_setopt($ch, CURLOPT_POSTFIELDS, $request);

$result = curl_exec($ch);
 
if (curl_errno($ch) != 0 ){
	die("curl error: ".curl_errno($ch));
}


Java

/** Imports */
import org.apache.http.HttpResponse;
import org.apache.http.client.HttpClient;
import org.apache.http.client.methods.HttpPost;
import org.apache.http.entity.StringEntity;
import org.apache.http.impl.client.HttpClientBuilder;
/** End imports */


HttpClient httpClient = HttpClientBuilder.create().build();
HttpPost request = new HttpPost("https://api.gateway360.com/api/3.0/sms/send-landing");

StringEntity params = new StringEntity(
"{" +
"    \"api_key\":\"399d2b438a53ebed3db8a7d52107f846\"," +
"    \"report_url\":\"http://yourserver.com/callback/script\"," +
"    \"landing_id\":2749," +
"    \"concat\":1," +
"    \"messages\":["  +
"		{"               +
"    		\"from\":\"GOOD PIZZA\"," +
"    		\"to\":\"34666666111\","  +
"    		\"text\":\"Hi John! See our new offers only available for you: {LANDING}\"," +
"    		\"send_at\":\"2018-02-18 17:30:00\""+
"		},"     +
"		{"               +
"    		\"from\":\"GOOD PIZZA\"," +
"    		\"to\":\"34666666112\","  +
"    		\"text\":\"Hi Maria! See our new offers only available for you: {LANDING}\"," +
"    		\"send_at\":\"2018-02-18 17:30:00\""+
"		}"     +
"	]"  +
"}");

request.addHeader("content-type", "application/json");
request.addHeader("Accept","application/json");
request.setEntity(params);
HttpResponse response = httpClient.execute(request);

RESPONSE

Parameters

status The sending status of request - either "ok", "error"
result Array of results in the same order you submitted.
status The status of the message - either "ok", "error"
sms_id Operator message id (with a maximum length of 32 characters). This is helpful for delivery reports.
custom Custom field sent in request.
error_id In case the status values "error" this param gives you the error id.
error_msg In case the status values "error" this param has additional information. This param should be use just for debugging.
error_id In case the status values "error" we will indicate you here the error id.
error_msg In case the status values "error" this param has additional information. This param should be use just for debugging.

Example 1

200 OK
{
    "status":"ok",
    "result":[
        {
            "status":"ok",
            "sms_id":"1a8940dc7471427db3021cde5b464444",
            "custom":"test"
        },
        {
            "status":"ok",
            "sms_id":"1a8940dc7471427db3021cde5b464481",
            "custom":""
        }
    ]
}
Two messages successfully processed

Example 2

200 OK
{
    "status":"ok",
    "result":[
        {
            "status":"ok",
            "sms_id":"1a8940dc7471427db3021cde5b464444",
            "custom":"test"
        },
        {
            "status":"error",
            "error_id":"INVALID_SENDER",
            "error_msg":"Sender cannot exceed 11 alphanumeric or 15 numeric characters.",
            "custom":""
        },
        {
            "status":"error",
            "error_id":"INVALID_DESTINATION",
            "error_msg":"Destination number must be in international format.",
            "custom":"12345"
        },
        {
            "status":"error",
            "error_id":"NOT_ENOUGH_BALANCE",
            "error_msg":"Your account has no funds.",
            "custom":""
        },
        {
            "status":"error",
            "error_id":"INVALID_DATETIME",
            "error_msg":"Invalid datetime format.",
            "custom":""
        }
    ]
}
One message successfully processed, and the rest with several errors.

Example 3

401 Unauthorized
{
    "status":"error",
    "error_id":"UNAUTHORIZED",
    "error_msg":"Your API key may be invalid or your IP is blocked."
}
We didn't continue processing your request because your API Key wasn't valid.

Example 4

400 Bad Request
{
    "status":"error",
    "error_id":"JSON_PARSE_ERROR",
    "error_msg":"Your JSON was formatted incorrectly."
}
We couldn't process your request


GET REPORTS (SMS LANDING)

Once you have submitted a message and the message has been delivered to the handset, the operator responds with a delivery report. It could take seconds or 48 hours to receive the delivery report from the operator, depending on the network. In addition, SMS Landing can send you reports whenever your client will open the landing page and when he click in any link, map or action button of the landing page. 

NOTE
To use this method you need to specify the url callback in the param "report_url" when
you send the message.

REQUEST TO YOUR SERVER

When we receive delivery reports we will send to your server instantly in batches, so each request can contain up to 1,000 delivery reports in a JSON format.

DLR REQUEST

Parameters

Array of delivery reports founds.
sms_id The message id.
from The sender of the message you sent.
to The destination number of the message you sent.
custom The custom value of the message you sent.
sms_date The date & time of the message you sent in the format: YYYY-MM-DD HH:MM:SS
status The status of the message, check the following table to see possible values.
dlr_date The date & time of the status.


JSON

[
    {
        "sms_id":"034d2acec0eb44af842de6a00bf4d934",
        "from":"SUPERGOL",
        "to":"34666666666",
        "custom":"YourReferenceID-774843",
        "sms_date":"2015-06-02 01:43:47",
        "status":"DELIVRD",
        "dlr_date":"2015-06-02 01:43:50"
    },
    {
        "sms_id":"034d2acec0eb44af842de6a00bf4d892",
        "from":"SUPERGOL",
        "to":"34666666666",
        "custom":"YourReferenceID-774849",
        "sms_date":"2015-06-02 01:43:47",
        "status":"DELIVRD",
        "dlr_date":"2015-06-02 01:43:49"
    }
]
Two delivery reports sent

STATUS VALUES

DELIVRD Message delivered to destination.
ACCEPTD Message is in accepted state, this state is temporary.
EXPIRED Message validity period has expired, the expiration of a message is 48 hours if not specified.
DELETED Message has been deleted due to the operator's reasons.
UNDELIV Message wasn't delivered by SMSC, expiration, not reachable, operator problems, portability...
UNKNOWN Message is in unknown state, the operator is trying, maybe the cellphone is turned off.
REJECTD Message is in rejected state, the destination or the operator rejected the message.

LANDING OPEN REQUEST

Parameters

sms_id The message id.
msisdn The destination number of the message you sent and who has opened the landing page.
timestamp The datetime when your client has opened the landing in the format: YYYY-MM-DD HH:MM:SS.
ip The ip from the landing page has been opened.
city The city from the landing page has been opened.
device The device OS (Operative System) from the landing page has been opened.
user_agent The user_agent of the device from the landing page has been opened.
brand The brand of the device from the landing page has been opened.
model The model of the device from the landing page has been opened.
full_name The model full name of the device from the landing page has been opened.
marketing_name The marketing name of the device from the landing page has been opened.

JSON

{
        "034d2acec0eb44af842de6a00bf4d934":
		{
		"msisdn":"34666666666",
		"timestamp":"2017-08-07 17:05:35",
		"ip":"8.8.8.8",
		"city":"Madrid",
		"device":"Android",
		"user_agent":"Mozilla/5.0 (Linux; Android 7.0; SAMSUNG SM-G950F Build/NRD90M) AppleWebKit/537.36",
		"brand":"Samsung",
		"model":"Galaxy S8",
		"full_name":"Samsung Galaxy S8",
		"marketing_name":"SAMSUNG SM-G950F"
	}
}

LANDING CLICK REQUEST

Parameters

sms_id The message id.
msisdn The destination number of the message you sent and who has opened the landing page.
timestamp The datetime when your client has clicked the link in the format: YYYY-MM-DD HH:MM:SS.
click The link (button, map, image...) which your client have clicked.

JSON

{
        "034d2acec0eb44af842de6a00bf4d934":
		{
		"msisdn":"34666666666",
		"timestamp":"2017-08-07 17:06:15",
		"click":"https://yourpage.com/more-information",
	}
}

YOUR SERVER RESPONSE

In order to accept the delivery reports, your server must respond with HTTP status code 200 OK. If you cannot process the data at this time, for example, due to a database problem, you can return any other error such as status code 500. If a status code other than 200 is received, the request will be retried every 30 minutes for a period of 6 hours.

Obtenido de «https://gigas.com/support/docs/index.php?title=API_SMS_Gigas&oldid=2964»