API SMS Gigas

Contenido

1 GETTING STARTED
2 SEND SMS
3 GET REPORTS
4 SEND SMS LANDING
5 GET REPORTS (SMS LANDING)
6 SEND SMS SURVEY
7 GET REPORTS (SMS SURVEY)
8 SEND SMS LINK
9 GET REPORTS (SMS LINK)
10 RECEIVE SMS
- 10.1 REQUEST TO YOUR SERVER
- 10.2 YOUR SERVER RESPONSE
11 HLR SERVICE (LOOKUP)
12 FACTOR AUTHENTICATION FLOW
13 ACCOUNT

GETTING STARTED

Welcome to API documentation. To integrate the API, you'll need some programming skills. If you’re ready to get started, read on.

JSON

For this version of our API we only support JSON. So instead of XML, HTTP POST parameters, or other serialization formats, all POST/PATCH requests require a valid JSON object for the body.

ENDPOINT

This is the URL you have to request where {app} is the application and {function} the function you want to call.

https://api.gateway360.com/api/3.0/{app}/{funcion}

AUTHENTICATION

Most api requests will require authentication of the user account. This is always done through the API key associated with your account. You can find your API Key details in your account.

ENCODING

All the parameters must be encoded and they must be in UTF-8.

CONTENT TYPE

When you submit a request it's really important to set Content-Type: application/json

ERROR HANDLING

Plan to encounter errors of varying degrees. From an invalid request to the rare outage, you'll see the errors appear as an HTTP Response code. 400-series errors (code 400-499) indicate a bad request. Do not retry without fixing this error first. 500-series errors (500-599) indicate a problem on our servers.

SEND SMS

With this method you can send bulk SMS easily. This method has been extremely optimized to send more than 500.000 SMS in less than one hour.

ENDPOINT

https://api.gateway360.com/api/3.0/sms/send

REQUEST

Parameters

api_key

Your API Key.

messages

Array of messages you want to send.

from	Originator address (sender). Up to 15 numeric or 11 alphanumeric characters. All characters non-ASCII will be replaced with its equivalent if exist any (á => a), empty in another case.
to	Destination mobile number in international format. Country code must be included.Ex: to=447525812121 when sending to UK.
text	Body of the text message (with a maximum length of 459 characters)
custom	Include any reference string for your reference. Useful for your internal reports. Maximum 32 alphanumeric characters.
send_at	When this message should be sent as timestamp in YYYY-MM-DD HH:MM:SS format. If you specify a time in the past, the message will be sent immediately.

report_url

URL where you want to receive the delivery report (DLR).

concat

Set to 1 if you want to allow concatenated messages (more than 160 characters). If concat is 0 (or it's not present) only first 160 chars will be sent.

encoding

Set to UCS2 if you want to send messages UCS2 (70 Unicode characters per SMS) with accents, emoticons and special characters. If encoding is GSM7 (or it's not present) the SMS will be treated as GSM7 (160 non Unicode characters per SMS). The Unicode encoding is only applicable to the text of message.

fake

Set to 1 if you want to simulate submitting messages, it's perfect for testing and debugging, it has no cost.

JSON

{
    "api_key":"399d2b438a53ebed3db8a7d52107f846",
    "report_url":"http://yourserver.com/callback/script",
    "link":"https://www.ebay.es",
    "concat":1,
    "messages":[
        {
            "from":"GOOD PIZZA",
            "to":"34666666111",
            "text":"Hi John! See our new offers only available for you: {LINK}",
            "send_at":"2018-02-18 17:30:00"
        },
        {
            "from":"GOOD PIZZA",
            "to":"34666666112",
            "text":"Hi Maria! See our new offers only available for you: {LINK}",
            "custom":"MyMsgID-12345",
            "send_at":"2018-02-18 17:30:00"
        }
    ]
}

PHP

$request = '{
    "api_key":"399d2b438a53ebed3db8a7d52107f846",
    "report_url":"http://yourserver.com/callback/script",
    "link":"https://www.ebay.es",
    "concat":1,
    "messages":[
        {
            "from":"GOOD PIZZA",
            "to":"34666666111",
            "text":"Hi John! See our new offers only available for you: {LINK}",
            "send_at":"2018-02-18 17:30:00"
        },
        {
            "from":"GOOD PIZZA",
            "to":"34666666112",
            "text":"Hi Maria! See our new offers only available for you: {LINK}",
            "custom":"MyMsgID-12345",
            "send_at":"2018-02-18 17:30:00"
        }
    ]
}';
        	
$headers = array('Content-Type: application/json');        	

$ch = curl_init('https://api.gateway360.com/api/3.0/sms/send-link');
curl_setopt($ch, CURLOPT_POST, 1);
curl_setopt($ch, CURLOPT_RETURNTRANSFER,true);
curl_setopt($ch, CURLOPT_HTTPHEADER, $headers);
curl_setopt($ch, CURLOPT_POSTFIELDS, $request);

$result = curl_exec($ch);
 
if (curl_errno($ch) != 0 ){
	die("curl error: ".curl_errno($ch));
}

JAVA

/** Imports */
import org.apache.http.HttpResponse;
import org.apache.http.client.HttpClient;
import org.apache.http.client.methods.HttpPost;
import org.apache.http.entity.StringEntity;
import org.apache.http.impl.client.HttpClientBuilder;
/** End imports */


HttpClient httpClient = HttpClientBuilder.create().build();
HttpPost request = new HttpPost("https://api.gateway360.com/api/3.0/sms/send-link");

StringEntity params = new StringEntity(
"{" +
"    \"api_key\":\"399d2b438a53ebed3db8a7d52107f846\"," +
"    \"report_url\":\"http://yourserver.com/callback/script\"," +
"    \"link\":\"https://ebay.es\"," +
"    \"concat\":1," +
"    \"messages\":["  +
"		{"               +
"    		\"from\":\"GOOD PIZZA\"," +
"    		\"to\":\"34666666111\","  +
"    		\"text\":\"Hi John! See our new offers only available for you: {LINK}\"," +
"    		\"send_at\":\"2018-02-18 17:30:00\""+
"		},"     +
"		{"               +
"    		\"from\":\"GOOD PIZZA\"," +
"    		\"to\":\"34666666112\","  +
"    		\"text\":\"Hi Maria! See our new offers only available for you: {LINK}\"," +
"    		\"send_at\":\"2018-02-18 17:30:00\""+
"		}"     +
"	]"  +
"}");

request.addHeader("content-type", "application/json");
request.addHeader("Accept","application/json");
request.setEntity(params);
HttpResponse response = httpClient.execute(request);

RESPONSE

Parameters

status

The sending status of request - either "ok", "error"

result

Array of results in the same order you submitted.

status	The status of the message - either "ok", "error"
sms_id	Operator message id (with a maximum length of 32 characters). This is helpful for delivery reports.
custom	Custom field sent in request.
error_id	In case the status values "error" this param gives you the error id.
error_msg	In case the status values "error" this param has additional information. This param should be use just for debugging.

error_id

In case the status values "error" we will indicate you here the error id.

error_msg

In case the status values "error" this param has additional information. This param should be use just for debugging.

Example 1

200 OK

{
    "status":"ok",
    "result":[
        {
            "status":"ok",
            "sms_id":"1a8940dc7471427db3021cde5b464444",
            "custom":"test"
        },
        {
            "status":"ok",
            "sms_id":"1a8940dc7471427db3021cde5b464481",
            "custom":""
        }
    ]
}

Two messages successfully processed

Example 2

200 OK

{
    "status":"ok",
    "result":[
        {
            "status":"ok",
            "sms_id":"1a8940dc7471427db3021cde5b464444",
            "custom":"test"
        },
        {
            "status":"error",
            "error_id":"INVALID_SENDER",
            "error_msg":"Sender cannot exceed 11 alphanumeric or 15 numeric characters.",
            "custom":""
        },
        {
            "status":"error",
            "error_id":"INVALID_DESTINATION",
            "error_msg":"Destination number must be in international format.",
            "custom":"12345"
        },
        {
            "status":"error",
            "error_id":"NOT_ENOUGH_BALANCE",
            "error_msg":"Your account has no funds.",
            "custom":""
        },
        {
            "status":"error",
            "error_id":"INVALID_DATETIME",
            "error_msg":"Invalid datetime format.",
            "custom":""
        }
    ]
}

One message successfully processed, and the rest with several errors.

Example 3

401 Unauthorized

{
    "status":"error",
    "error_id":"UNAUTHORIZED",
    "error_msg":"Your API key may be invalid or your IP is blocked."
}

We didn't continue processing your request because your API Key wasn't valid.

Example 4

400 Bad Request

{
    "status":"error",
    "error_id":"JSON_PARSE_ERROR",
    "error_msg":"Your JSON was formatted incorrectly."
}

We couldn't process your request

ERRORS

Error ID	Explanation
INVALID_CONTENT_TYPE	The content type must be: Content-Type: application/json
JSON_PARSE_ERROR	Your JSON was formatted incorrectly or was considered otherwise improper or incomplete. Check it here.
MISSING_PARAMS	Your request is incomplete and missing some mandatory parameters.
BAD_PARAMS	One or more of your parameters has incorrect format or value.
UNAUTHORIZED	correctly or see if the IP is blocked in your account API settings.
INVALID_SENDER	The sender address (from parameter) was not allowed for this message.
INVALID_DESTINATION	Our Gateway was unable to process your destination. The number must be in MSISDN format. Check format here.
INVALID_TEXT	The field was empty or is corrupt.
INVALID_DATETIME	The format we were expecting was: YYYY-MM-DD HH:MM:SS
NOT_ENOUGH_BALANCE	Your account has no funds to process this request, add credits to your account and try again.
LIMIT_EXCEEDED	Your request has exceeded the maximum of 1000 sms requests per batch.

SPECIAL LONG CHARACTERS

There are 9 special characters that are counted as 2 individual characters when GSM encoded. This could result in a message becoming longer and therefore being concatenated.The following table identifies these characters.

Symbol	Name	Symbol	Name
[	Open square	\|	Vertical bar
\	Backslash	}	Right brace
]	Close square	~	Tilde
^	Caret	€	Euro symbol
{	Left brace

GSM ENCODING

According to GSM specification, a standard SMS message can contain up to 140 bytes of data (payload). Standard latin (ISO-8859-1) character encoding represents a single character using 1 byte, which is 8 bits. Therefore, the maximum number of latin 1 characters that could be included in an sms is 140.

GSM encoding represents characters using 7 bits instead of 8. This therefore provides a maximum of 160 characters per SMS. (140 * 8 bits) / 7 bits = 160

This effectively halves the number of characters that the GSM character set can support, compared to ISO-8859-1. In order to include common characters that are usually represented using the 8th bit, these characters as well as other symbol characters must be re-mapped to a combination of lower bits. These re-mapped characters are often referred to as special characters. This re-mapping, in combination with packing 7-bit characters into 8- bit bytes is called GSM Encoding.

NOTE
The below table lists the 7-bit default alphabet as specified by GSM 03.38

Hex	Character name	Character	ISO-8859-1 Hex
0x00	COMMERCIAL AT	@	40
0x01	POUND SIGN	£	A3
0x02	DOLLAR SIGN	$	24
0x03	YEN SIGN	¥	A5
0x04	LATIN SMALL LETTER E WITH GRAVE	è	E8
0x05	LATIN SMALL LETTER E WITH ACUTE	é	E9
0x06	LATIN SMALL LETTER U WITH GRAVE	ù	F9
0x07	LATIN SMALL LETTER I WITH GRAVE	ì	EC
0x08	LATIN SMALL LETTER O WITH GRAVE	ò	F2
0x09	LATIN SMALL LETTER C WITH CEDILLA (casechanged)	Ç	C7
0x0A	Line Feed		A
0x0B	LATIN CAPITAL LETTER O WITH STROKE	Ø	D8
0x0C	LATIN SMALL LETTER O WITH STROKE	ø	F8
0x0D	Carriage Return		D
0x0E	LATIN CAPITAL LETTER A WITH RING ABOVE	Å	C5
0x0F	LATIN SMALL LETTER A WITH RING ABOVE	å	E5
0x10	GREEK CAPITAL LETTER	Δ
0x11	LOW LINE	_	5F
0x12	GREEK CAPITAL LETTER	Φ
0x13	GREEK CAPITAL LETTER	Γ
0x14	GREEK CAPITAL LETTER	Λ
0x15	GREEK CAPITAL LETTER	Ω
0x16	GREEK CAPITAL LETTER	Π
0x17	GREEK CAPITAL LETTER	Ψ
0x18	GREEK CAPITAL LETTER	Σ
0x19	GREEK CAPITAL LETTER	Θ
0x1A	GREEK CAPITAL LETTER	Ξ
0x1B	ESCAPE TO EXTENSION
0x1B0A	FORM FEED		12
0x1B14	CIRCUMFLEX ACCENT	^	5E
0x1B28	LEFT CURLY BRACKET	{	7B
0x1B29	RIGHT CURLY BRACKET	}	7D
0x1B2F	REVERSE SOLIDUS (BACKSLASH)	\	5C
0x1B3C	LEFT SQUARE BRACKET	[	5B
0x1B3D	TILDE	~	7E
0x1B3E	RIGHT SQUARE BRACKET	]	5D
0x1B40	VERTICAL BAR	\|	7C
0x1B65	EURO SIGN	€	A4 (ISO-8859-15)
0x1C	LATIN CAPITAL LETTER AE	Æ	C6
0x1D	LATIN SMALL LETTER AE	æ	E6
0x1E	LATIN SMALL LETTER SHARP S (German)	ß	DF
0x1F	LATIN CAPITAL LETTER E WITH ACUTE	É	C9
0x20	SPACE		20
0x21	EXCLAMATION MARK	!	21
0x22	QUOTATION MARK	"	22
0x23	NUMBER SIGN	#	23
0x25	PERCENT SIGN	%	25
0x26	AMPERSAND	&	26
0x27	APOSTROPHE		27
0x28	LEFT PARENTHESIS	(	28
0x29	RIGHT PARENTHESIS	)	29
0x2A	ASTERISK	*	2A
0x2B	PLUS SIGN	+	2B
0x2C	COMMA	,	2C
0x2D	HYPHEN-MINUS	-	2D
0x2E	FULL STOP	.	2E
0x2F	SOLIDUS (SLASH)	/	2F
0x30	DIGIT ZERO	0	30
0x31	DIGIT ONE	1	31
0x32	DIGIT TWO	2	32
0x33	DIGIT THREE	3	33
0x34	DIGIT FOUR	4	34
0x35	DIGIT FIVE	5	35
0x36	DIGIT SIX	6	36
0x37	DIGIT SEVEN	7	37
0x38	DIGIT EIGHT	8	38
0x39	DIGIT NINE	9	39
0x3A	COLON	:	3A
0x3B	SEMICOLON	;	3B
0x3C	LESS-THAN SIGN	<	3C
0x3D	EQUALS SIGN	=	3D
0x3E	GREATER-THAN SIGN	>	3E
0x3F	QUESTION MARK	?	3F
0x40	INVERTED EXCLAMATION MARK	¡	A1
0x41	LATIN CAPITAL LETTER A	A	41
0x42	LATIN CAPITAL LETTER B	B	42
0x43	LATIN CAPITAL LETTER C	C	43
0x44	LATIN CAPITAL LETTER D	D	44
0x45	LATIN CAPITAL LETTER E	E	45
0x46	LATIN CAPITAL LETTER F	F	46
0x47	LATIN CAPITAL LETTER G	G	47
0x48	LATIN CAPITAL LETTER H	H	48
0x49	LATIN CAPITAL LETTER I	I	49
0x4A	LATIN CAPITAL LETTER J	J	4A
0x4B	LATIN CAPITAL LETTER K	K	4B
0x4C	LATIN CAPITAL LETTER L	L	4C
0x4D	LATIN CAPITAL LETTER M	M	4D
0x4E	LATIN CAPITAL LETTER N	N	4E
0x4F	LATIN CAPITAL LETTER O	O	4F
0x50	LATIN CAPITAL LETTER P	P	50
0x51	LATIN CAPITAL LETTER Q	Q	51
0x52	LATIN CAPITAL LETTER R	R	52
0x53	LATIN CAPITAL LETTER S	S	53
0x54	LATIN CAPITAL LETTER T	T	54
0x55	LATIN CAPITAL LETTER U	U	55
0x56	LATIN CAPITAL LETTER V	V	56
0x57	LATIN CAPITAL LETTER W	W	57
0x58	LATIN CAPITAL LETTER X	X	58
0x59	LATIN CAPITAL LETTER Y	Y	59
0x5A	LATIN CAPITAL LETTER Z	Z	5A
0x5B	LATIN CAPITAL LETTER A WITH DIAERESIS	Ä	C4
0x5C	LATIN CAPITAL LETTER O WITH DIAERESIS	Ö	D6
0x5D	LATIN CAPITAL LETTER N WITH TILDE	Ñ	D1
0x5E	LATIN CAPITAL LETTER U WITH DIAERESIS	Ü	DC
0x5F	SECTION SIGN	§	A7
0x60	INVERTED QUESTION MARK	¿	BF
0x61	LATIN SMALL LETTER A	a	61
0x62	LATIN SMALL LETTER B	b	62
0x63	LATIN SMALL LETTER C	c	63
0x64	LATIN SMALL LETTER D	d	64
0x65	LATIN SMALL LETTER E	e	65
0x66	LATIN SMALL LETTER F	f	66
0x67	LATIN SMALL LETTER G	g	67
0x68	LATIN SMALL LETTER H	h	68
0x69	LATIN SMALL LETTER I	i	69
0x6A L	ATIN SMALL LETTER J	j	6A
0x6B	LATIN SMALL LETTER K	k	6B
0x6C	LATIN SMALL LETTER L	l	6C
0x6D	LATIN SMALL LETTER M	m	6D
0x6E	LATIN SMALL LETTER N	n	6E
0x6F	LATIN SMALL LETTER O	o	6F
0x70	LATIN SMALL LETTER P	p	70
0x71	LATIN SMALL LETTER Q	q	71
0x72	LATIN SMALL LETTER R	r	72
0x73	LATIN SMALL LETTER S	s	73
0x74	LATIN SMALL LETTER T	t	74
0x75	LATIN SMALL LETTER U	u	75
0x76	LATIN SMALL LETTER V	v	76
0x77	LATIN SMALL LETTER W	w	77
0x78	LATIN SMALL LETTER X	x	78
0x79	LATIN SMALL LETTER Y	y	79
0x7A	LATIN SMALL LETTER Z	z	7A
0x7B	LATIN SMALL LETTER A WITH DIAERESIS	ä	E4
0x7C	LATIN SMALL LETTER O WITH DIAERESIS	ö	F6
0x7D	LATIN SMALL LETTER N WITH TILDE	ñ	F1
0x7E	LATIN SMALL LETTER U WITH DIAERESIS	ü	FC
0x7F	LATIN SMALL LETTER A WITH GRAVE	à	E0

UCS2 ENCODING

UCS2 is the Unicode format required for SMS, as opposed to the later format UTF-16. Since each UCS2 character requires 2 bytes, the SMS message length is reduced to 70 characters: 140 bytes / 2 bytes = 70 characters. You must also set the correct Data Coding Scheme value, 0 x 08 or 8 in the case of UCS2. UCS2 encoding allows the use of emoticons in SMS and these are treated as characters so you can write it in your SMS as any other character. Unicode messages can be concatenated. The concatenation headers reduce the characters available for content as follows:

Number of SMS	Maximum Message Length
1	70 characters.
2	134 characters.
3	201 characters.
4	268 characters.
5	335 characters.
6	402 characters.
7	469 characters.
8	536 characters.

JSON

{
    "api_key":"399d2b438a53ebed3db8a7d52107f846",
    "report_url":"http://yourserver.com/callback/script",
    "concat":1,
    "messages":[
        {
            "from":"GOOD PIZZA",
            "to":"34666666111",
            "text":"Hi John, today 2x1 in pizzas, watch the game like a boss with our new pepperoni pizza!",
            "send_at":"2018-02-18 17:30:00"
        },
        {
            "from":"GOOD PIZZA",
            "to":"34666666112",
            "text":"Hi Maria, , today 2x1 in pizzas, watch the game like a boss with our new pepperoni pizza!",
            "custom":"MyMsgID-12345",
            "send_at":"2018-02-18 17:30:00"
        }
    ]
}

cURL

curl - X POST \
- H 'Content-Type: application/json' \
- H 'Accept: application/json' \
-d '{
 "api_key":"399d2b438a53ebed3db8a7d52107f846",
 "report_url":"http://yourserver.com/callback/script",
 "concat":1,
 "messages":[
 {
 "from":"GOOD PIZZA",
 "to":"34666666111",
 "text":"Hi John, today 2x1 in pizzas, watch the game like a boss
with our new pepperoni pizza!",
 "send_at":"2018-02-18 17:30:00"
 },
SEND SMS 8
 {
 "from":"GOOD PIZZA",
 "to":"34666666112",
 "text":"Hi Maria, , today 2x1 in pizzas, watch the game like a bo
ss with our new pepperoni pizza!",
 "custom":"MyMsgID-12345",
 "send_at":"2018-02-18 17:30:00"
 }
 ]
}' https: / /api.gateway360.com/api/3.0/sms/send

PHP

$request = '{
    "api_key":"399d2b438a53ebed3db8a7d52107f846",
    "report_url":"http://yourserver.com/callback/script",
    "concat":1,
    "messages":[
        {
            "from":"GOOD PIZZA",
            "to":"34666666111",
            "text":"Hi John, today 2x1 in pizzas, watch the game like a boss with our new pepperoni pizza!",
            "send_at":"2018-02-18 17:30:00"
        },
        {
            "from":"GOOD PIZZA",
            "to":"34666666112",
            "text":"Hi Maria, , today 2x1 in pizzas, watch the game like a boss with our new pepperoni pizza!",
            "custom":"MyMsgID-12345",
            "send_at":"2018-02-18 17:30:00"
        }
    ]
}';
        	
$headers = array('Content-Type: application/json');        	

$ch = curl_init('https://api.gateway360.com/api/3.0/sms/send');
curl_setopt($ch, CURLOPT_POST, 1);
curl_setopt($ch, CURLOPT_RETURNTRANSFER,true);
curl_setopt($ch, CURLOPT_HTTPHEADER, $headers);
curl_setopt($ch, CURLOPT_POSTFIELDS, $request);

$result = curl_exec($ch);
 
if (curl_errno($ch) != 0 ){
	die("curl error: ".curl_errno($ch));
}

Java

/** Imports */
import org.apache.http.HttpResponse;
import org.apache.http.client.HttpClient;
import org.apache.http.client.methods.HttpPost;
import org.apache.http.entity.StringEntity;
import org.apache.http.impl.client.HttpClientBuilder;
/** End imports */


HttpClient httpClient = HttpClientBuilder.create().build();
HttpPost request = new HttpPost("https://api.gateway360.com/api/3.0/sms/send");

StringEntity params = new StringEntity(
"{" +
"    \"api_key\":\"399d2b438a53ebed3db8a7d52107f846\"," +
"    \"report_url\":\"http://yourserver.com/callback/script\"," +
"    \"concat\":1," +
"    \"messages\":["  +
"		{"               +
"    		\"from\":\"GOOD PIZZA\"," +
"    		\"to\":\"34666666111\","  +
"    		\"text\":\"Hi John, today 2x1 in pizzas, watch the game like a boss with our new pepperoni pizza!\"," +
"    		\"send_at\":\"2018-02-18 17:30:00\""+
"		},"     +
"		{"               +
"    		\"from\":\"GOOD PIZZA\"," +
"    		\"to\":\"34666666112\","  +
"    		\"text\":\"Hi Maria, , today 2x1 in pizzas, watch the game like a boss with our new pepperoni pizza!\"," +
"    		\"send_at\":\"2018-02-18 17:30:00\""+
"		}"     +
"	]"  +
"}");

request.addHeader("content-type", "application/json");
request.addHeader("Accept","application/json");
request.setEntity(params);
HttpResponse response = httpClient.execute(request);

Ruby

require 'uri'
require 'net/http'

url = URI("https://api.gateway360.com/api/3.0/sms/send")

http = Net::HTTP.new(url.host, url.port)
http.use_ssl = true
http.verify_mode = OpenSSL::SSL::VERIFY_NONE

request = Net::HTTP::Post.new(url)
request["content-type"] = 'application/json'
request["accept"] = 'application/json'

request.body = '{
    "api_key":"399d2b438a53ebed3db8a7d52107f846",
    "report_url":"http://yourserver.com/callback/script",
    "concat":1,
    "messages":[
        {
            "from":"GOOD PIZZA",
            "to":"34666666111",
            "text":"Hi John, today 2x1 in pizzas, watch the game like a boss with our new pepperoni pizza!",
            "send_at":"2018-02-18 17:30:00"
        },
        {
            "from":"GOOD PIZZA",
            "to":"34666666112",
            "text":"Hi Maria, , today 2x1 in pizzas, watch the game like a boss with our new pepperoni pizza!",
            "custom":"MyMsgID-12345",
            "send_at":"2018-02-18 17:30:00"
        }
    ]
}'

response = http.request(request)
puts response.read_body

Python

conn = http.client.HTTPSConnection("api.gateway360.com")

payload = """{
    "api_key":"399d2b438a53ebed3db8a7d52107f846",
    "report_url":"http://yourserver.com/callback/script",
    "concat":1,
    "messages":[
        {
            "from":"GOOD PIZZA",
            "to":"34666666111",
            "text":"Hi John, today 2x1 in pizzas, watch the game like a boss with our new pepperoni pizza!",
            "send_at":"2018-02-18 17:30:00"
        },
        {
            "from":"GOOD PIZZA",
            "to":"34666666112",
            "text":"Hi Maria, , today 2x1 in pizzas, watch the game like a boss with our new pepperoni pizza!",
            "custom":"MyMsgID-12345",
            "send_at":"2018-02-18 17:30:00"
        }
    ]
}"""

headers = {
    'content-type': "application/json",
    'accept': "application/json"
    }

conn.request("POST", "/api/3.0/sms/send", payload, headers)

res = conn.getresponse()
data = res.read()

print(data.decode("utf-8"))

RESPONSE

Parameters

status

The sending status of request - either "ok", "error"

result

Array of results in the same order you submitted.

status	The status of the message - either "ok", "error"
sms_id	Operator message id (with a maximum length of 32 characters). This is helpful for delivery reports.
custom	Custom field sent in request.
error_id	In case the status values "error" this param gives you the error id.
error_msg	In case the status values "error" this param has additional information. This param should be use just for debugging.

error_id

In case the status values "error" we will indicate you here the error id.

error_msg

In case the status values "error" this param has additional information. This param should be use just for debugging.

Example 1

200 OK

{
    "status":"ok",
    "result":[
        {
            "status":"ok",
            "sms_id":"1a8940dc7471427db3021cde5b464444",
            "custom":"test"
        },
        {
            "status":"ok",
            "sms_id":"1a8940dc7471427db3021cde5b464481",
            "custom":""
        }
    ]
}

Two messages successfully processed

Example 2

200 OK

{
    "status":"ok",
    "result":[
        {
            "status":"ok",
            "sms_id":"1a8940dc7471427db3021cde5b464444",
            "custom":"test"
        },
        {
            "status":"error",
            "error_id":"INVALID_SENDER",
            "error_msg":"Sender cannot exceed 11 alphanumeric or 15 numeric characters.",
            "custom":""
        },
        {
            "status":"error",
            "error_id":"INVALID_DESTINATION",
            "error_msg":"Destination number must be in international format.",
            "custom":"12345"
        },
        {
            "status":"error",
            "error_id":"NOT_ENOUGH_BALANCE",
            "error_msg":"Your account has no funds.",
            "custom":""
        },
        {
            "status":"error",
            "error_id":"INVALID_DATETIME",
            "error_msg":"Invalid datetime format.",
            "custom":""
        }
    ]
}

One message successfully processed, and the rest with several errors.

Example 3

401 Unauthorized

{
    "status":"error",
    "error_id":"UNAUTHORIZED",
    "error_msg":"Your API key may be invalid or your IP is blocked."
}

We didn't continue processing your request because your API Key wasn't valid.

Example 4

400 Bad Request

{
    "status":"error",
    "error_id":"JSON_PARSE_ERROR",
    "error_msg":"Your JSON was formatted incorrectly."
}

We couldn't process your request

ERRORS

Error ID	Explanation
INVALID_CONTENT_TYPE	The content type must be: Content-Type: application/json
JSON_PARSE_ERROR	Your JSON was formatted incorrectly or was considered otherwise improper or incomplete. Check it here.
MISSING_PARAMS	Your request is incomplete and missing some mandatory parameters.
BAD_PARAMS	One or more of your parameters has incorrect format or value.
UNAUTHORIZED	Your API key may be invalid, double-check that your API key was input correctly or see if the IP is blocked in your account API settings.
INVALID_SENDER	The sender address (from parameter) was not allowed for this message.
INVALID_DESTINATION	Our Gateway was unable to process your destination. The number must be in MSISDN format. Check format here.
INVALID_TEXT	The field was empty or is corrupt.
INVALID_DATETIME	The format we were expecting was: YYYY-MM-DD HH:MM:SS
NOT_ENOUGH_BALANCE	Your account has no funds to process this request, add credits to your account and try again.
LIMIT_EXCEEDED	Your request has exceeded the maximum of 1000 sms requests per batch.

SPECIAL LONG CHARACTERS

There are 9 special characters that are counted as 2 individual characters when GSM encoded. This could result in a message becoming longer and therefore being concatenated.The following table identifies these characters.

Symbol	Name	Symbol	Name
[	Open square	\|	Vertical bar
\	Backslash	}	Right brace
]	Close square	~	Tilde
^	Caret	€	Euro symbol
{	Left brace

CONCATENATED GSM MESSAGES

Also referred to as a long message, multipart message or extended message, a concatenatedmessage is formed from several standard SMS containing a 7 byte concatenation header at the beginning of each one. Since this 7 byte header is within the message, it reduces the total size of each SMS to 153 characters each. The table below shows the maximum message length per number of SMS used for plain 7-bit messages. If you want to send a concatenated message, don’t forget you must set the parameter "concat" to value 1.

Number of SMS	Maximum Message Length
1	160 characters.
2	306 characters.
3	459 characters.
4	612 characters.
5	765 characters.
6	918 characters.
7	1071 characters.
8	1224 characters.

GSM ENCODING

According to GSM specification, a standard SMS message can contain up to 140 bytes of data (payload). Standard latin (ISO-8859-1) character encoding represents a single character using 1 byte, which is 8 bits. Therefore, the maximum number of latin 1 characters that could be included in an sms is 140. GSM encoding represents characters using 7 bits instead of 8. This therefore provides a maximum of 160 characters per SMS. (140 * 8 bits) / 7 bits = 160 This effectively halves the number of characters that the GSM character set can support, compared to ISO-8859-1. In order to include common characters that are usually represented using the 8th bit, these characters as well as other symbol characters must be re-mapped to a combination of lower bits. These re-mapped characters are often referred to as special characters. This re-mapping, in combination with packing 7-bit characters into 8- bit bytes is called GSM Encoding.

NOTE
The below table lists the 7-bit default alphabet as specified by GSM 03.38

Hex	Character name	Character	ISO-8859-1 Hex
0x00	COMMERCIAL AT	@	40
0x01	POUND SIGN	£	A3
0x02	DOLLAR SIGN	$	24
0x03	YEN SIGN	¥	A5
0x04	LATIN SMALL LETTER E WITH GRAVE	è	E8
0x05	LATIN SMALL LETTER E WITH ACUTE	é	E9
0x06	LATIN SMALL LETTER U WITH GRAVE	ù	F9
0x07	LATIN SMALL LETTER I WITH GRAVE	ì	EC
0x08	LATIN SMALL LETTER O WITH GRAVE	ò	F2
0x09	LATIN SMALL LETTER C WITH CEDILLA (casechanged)	Ç	C7
0x0A	Line Feed		A
0x0B	LATIN CAPITAL LETTER O WITH STROKE	Ø	D8
0x0C	LATIN SMALL LETTER O WITH STROKE	ø	F8
0x0D	Carriage Return		D
0x0E	LATIN CAPITAL LETTER A WITH RING ABOVE	Å	C5
0x0F	LATIN SMALL LETTER A WITH RING ABOVE	å	E5
0x10	GREEK CAPITAL LETTER	Δ
0x11	LOW LINE	_	5F
0x12	GREEK CAPITAL LETTER	Φ
0x13	GREEK CAPITAL LETTER	Γ
0x14	GREEK CAPITAL LETTER	Λ
0x15	GREEK CAPITAL LETTER	Ω
0x16	GREEK CAPITAL LETTER	Π
0x17	GREEK CAPITAL LETTER	Ψ
0x18	GREEK CAPITAL LETTER	Σ
0x19	GREEK CAPITAL LETTER	Θ
0x1A	GREEK CAPITAL LETTER	Ξ
0x1B	ESCAPE TO EXTENSION
0x1B0A	FORM FEED		12
0x1B14	CIRCUMFLEX ACCENT	^	5E
0x1B28	LEFT CURLY BRACKET	{	7B
0x1B29	RIGHT CURLY BRACKET	}	7D
0x1B2F	REVERSE SOLIDUS (BACKSLASH)	\	5C
0x1B3C	LEFT SQUARE BRACKET	[	5B
0x1B3D	TILDE	~	7E
0x1B3E	RIGHT SQUARE BRACKET	]	5D
0x1B40	VERTICAL BAR	\|	7C
0x1B65	EURO SIGN	€	A4 (ISO-8859-15)
0x1C	LATIN CAPITAL LETTER AE	Æ	C6
0x1D	LATIN SMALL LETTER AE	æ	E6
0x1E	LATIN SMALL LETTER SHARP S (German)	ß	DF
0x1F	LATIN CAPITAL LETTER E WITH ACUTE	É	C9
0x20	SPACE		20
0x21	EXCLAMATION MARK	!	21
0x22	QUOTATION MARK	"	22
0x23	NUMBER SIGN	#	23
0x25	PERCENT SIGN	%	25
0x26	AMPERSAND	&	26
0x27	APOSTROPHE		27
0x28	LEFT PARENTHESIS	(	28
0x29	RIGHT PARENTHESIS	)	29
0x2A	ASTERISK	*	2A
0x2B	PLUS SIGN	+	2B
0x2C	COMMA	,	2C
0x2D	HYPHEN-MINUS	-	2D
0x2E	FULL STOP	.	2E
0x2F	SOLIDUS (SLASH)	/	2F
0x30	DIGIT ZERO	0	30
0x31	DIGIT ONE	1	31
0x32	DIGIT TWO	2	32
0x33	DIGIT THREE	3	33
0x34	DIGIT FOUR	4	34
0x35	DIGIT FIVE	5	35
0x36	DIGIT SIX	6	36
0x37	DIGIT SEVEN	7	37
0x38	DIGIT EIGHT	8	38
0x39	DIGIT NINE	9	39
0x3A	COLON	:	3A
0x3B	SEMICOLON	;	3B
0x3C	LESS-THAN SIGN	<	3C
0x3D	EQUALS SIGN	=	3D
0x3E	GREATER-THAN SIGN	>	3E
0x3F	QUESTION MARK	?	3F
0x40	INVERTED EXCLAMATION MARK	¡	A1
0x41	LATIN CAPITAL LETTER A	A	41
0x42	LATIN CAPITAL LETTER B	B	42
0x43	LATIN CAPITAL LETTER C	C	43
0x44	LATIN CAPITAL LETTER D	D	44
0x45	LATIN CAPITAL LETTER E	E	45
0x46	LATIN CAPITAL LETTER F	F	46
0x47	LATIN CAPITAL LETTER G	G	47
0x48	LATIN CAPITAL LETTER H	H	48
0x49	LATIN CAPITAL LETTER I	I	49
0x4A	LATIN CAPITAL LETTER J	J	4A
0x4B	LATIN CAPITAL LETTER K	K	4B
0x4C	LATIN CAPITAL LETTER L	L	4C
0x4D	LATIN CAPITAL LETTER M	M	4D
0x4E	LATIN CAPITAL LETTER N	N	4E
0x4F	LATIN CAPITAL LETTER O	O	4F
0x50	LATIN CAPITAL LETTER P	P	50
0x51	LATIN CAPITAL LETTER Q	Q	51
0x52	LATIN CAPITAL LETTER R	R	52
0x53	LATIN CAPITAL LETTER S	S	53
0x54	LATIN CAPITAL LETTER T	T	54
0x55	LATIN CAPITAL LETTER U	U	55
0x56	LATIN CAPITAL LETTER V	V	56
0x57	LATIN CAPITAL LETTER W	W	57
0x58	LATIN CAPITAL LETTER X	X	58
0x59	LATIN CAPITAL LETTER Y	Y	59
0x5A	LATIN CAPITAL LETTER Z	Z	5A
0x5B	LATIN CAPITAL LETTER A WITH DIAERESIS	Ä	C4
0x5C	LATIN CAPITAL LETTER O WITH DIAERESIS	Ö	D6
0x5D	LATIN CAPITAL LETTER N WITH TILDE	Ñ	D1
0x5E	LATIN CAPITAL LETTER U WITH DIAERESIS	Ü	DC
0x5F	SECTION SIGN	§	A7
0x60	INVERTED QUESTION MARK	¿	BF
0x61	LATIN SMALL LETTER A	a	61
0x62	LATIN SMALL LETTER B	b	62
0x63	LATIN SMALL LETTER C	c	63
0x64	LATIN SMALL LETTER D	d	64
0x65	LATIN SMALL LETTER E	e	65
0x66	LATIN SMALL LETTER F	f	66
0x67	LATIN SMALL LETTER G	g	67
0x68	LATIN SMALL LETTER H	h	68
0x69	LATIN SMALL LETTER I	i	69
0x6A L	ATIN SMALL LETTER J	j	6A
0x6B	LATIN SMALL LETTER K	k	6B
0x6C	LATIN SMALL LETTER L	l	6C
0x6D	LATIN SMALL LETTER M	m	6D
0x6E	LATIN SMALL LETTER N	n	6E
0x6F	LATIN SMALL LETTER O	o	6F
0x70	LATIN SMALL LETTER P	p	70
0x71	LATIN SMALL LETTER Q	q	71
0x72	LATIN SMALL LETTER R	r	72
0x73	LATIN SMALL LETTER S	s	73
0x74	LATIN SMALL LETTER T	t	74
0x75	LATIN SMALL LETTER U	u	75
0x76	LATIN SMALL LETTER V	v	76
0x77	LATIN SMALL LETTER W	w	77
0x78	LATIN SMALL LETTER X	x	78
0x79	LATIN SMALL LETTER Y	y	79
0x7A	LATIN SMALL LETTER Z	z	7A
0x7B	LATIN SMALL LETTER A WITH DIAERESIS	ä	E4
0x7C	LATIN SMALL LETTER O WITH DIAERESIS	ö	F6
0x7D	LATIN SMALL LETTER N WITH TILDE	ñ	F1
0x7E	LATIN SMALL LETTER U WITH DIAERESIS	ü	FC
0x7F	LATIN SMALL LETTER A WITH GRAVE	à	E0

UCS2 ENCODING

UCS2 is the Unicode format required for SMS, as opposed to the later format UTF-16. Since each UCS2 character requires 2 bytes, the SMS message length is reduced to 70 characters: 140 bytes / 2 bytes = 70 characters. You must also set the correct Data Coding Scheme value, 0 x 08 or 8 in the case of UCS2. UCS2 encoding allows the use of emoticons in SMS and these are treated as characters so you can write it in your SMS as any other character. Unicode messages can be concatenated. The concatenation headers reduce the characters available for content as follows:

Number of SMS	Maximum Message Length
1	70 characters.
2	134 characters.
3	201 characters.
4	268 characters.
5	335 characters.
6	402 characters.
7	469 characters.
8	536 characters.

GET REPORTS

Once you have submitted a message and the message has been delivered to the handset, the operator responds with a delivery report. It could take seconds or 48 hours to receive the delivery report from the operator, depending on the network.

NOTE
To use this method you need to specify the url callback in the param "report_url" when
you send the message.

REQUEST TO YOUR SERVER

When we receive delivery reports we will send to your server instantly in batches, so each request can contain up to 1,000 delivery reports in a JSON format.

Parameters

Array of delivery reports founds.

sms_id	The message id.
from	The sender of the message you sent.
to	The destination number of the message you sent.
custom	The custom value of the message you sent.
sms_date	The date & time of the message you sent in the format: YYYY-MM-DD HH:MM:SS
status	The status of the message, check the following table to see possible values.
dlr_date	The date & time of the status.

JSON

[
    {
        "sms_id":"034d2acec0eb44af842de6a00bf4d934",
        "from":"SUPERGOL",
        "to":"34666666666",
        "custom":"YourReferenceID-774843",
        "sms_date":"2015-06-02 01:43:47",
        "status":"DELIVRD",
        "dlr_date":"2015-06-02 01:43:50"
    },
    {
        "sms_id":"034d2acec0eb44af842de6a00bf4d892",
        "from":"SUPERGOL",
        "to":"34666666666",
        "custom":"YourReferenceID-774849",
        "sms_date":"2015-06-02 01:43:47",
        "status":"DELIVRD",
        "dlr_date":"2015-06-02 01:43:49"
    }
]

Two delivery reports sent

STATUS VALUES

DELIVRD	Message delivered to destination.
ACCEPTD	Message is in accepted state, this state is temporary.
EXPIRED	Message validity period has expired, the expiration of a message is 48 hours if not specified.
DELETED	Message has been deleted due to the operator's reasons.
UNDELIV	Message wasn't delivered by SMSC, expiration, not reachable, operator problems, portability...
UNKNOWN	Message is in unknown state, the operator is trying, maybe the cellphone is turned off.
REJECTD	Message is in rejected state, the destination or the operator rejected the message.

YOUR SERVER RESPONSE

In order to accept the delivery reports, your server must respond with HTTP status code 200 OK. If you cannot process the data at this time, for example, due to a database problem, you can return any other error such as status code 500. If a status code other than 200 is received, the request will be retried every 30 minutes for a period of 6 hours.

SEND SMS LANDING

With this method you can send bulk SMS Landing easily. This method has been extremely optimized to send more than 500.000 SMS in less than one hour. To send SMS Landing via API, you must first have it created in your account in your user panel, since you will need `landing_id` to send it.

ENDPOINT

https://api.gateway360.com/api/3.0/sms/send-landing

REQUEST

Parameters

api_key

Your API Key.

messages

Array of messages you want to send.

from	Originator address (sender). Up to 15 numeric or 11 alphanumeric characters. All characters non-ASCII will be replaced with its equivalent if exist any (á => a), empty in another case.
to	Destination mobile number in international format. Country code must be included.Ex: to=447525812121 when sending to UK.
text	Body of the text message including the tag {LANDING} (with a maximum length of 459 characters). Ex: "Déjà vu, you can find it and more in our shop: {LANDING}"
custom	Include any reference string for your reference. Useful for your internal reports. Maximum 32 alphanumeric characters.
send_at	When this message should be sent as timestamp in YYYY-MM-DD HH:MM:SS format. If you specify a time in the past, the message will be sent immediately.

landing_id

ID of the landing template created in your account.

campaign_name

Name of the campaign in case your want to group more than one SMS in a unique campaign to see it in your panel (otherway no one campaign will be created).

report_url

URL where you want to receive the delivery report (DLR) and the events of the landing as your client open it or click in some link or action.

concat

Set to 1 if you want to allow concatenated messages (more than 160 characters). If concat is 0 (or it's not present) only first 160 chars will be sent.

encoding

Set to UCS2 if you want to send messages UCS2 (70 Unicode characters per SMS) with accents, emoticons and special characters. If encoding is GSM7 (or it's not present) the SMS will be treated as GSM7 (160 non Unicode characters per SMS). The Unicode encoding is only applicable to the text of message.

fake

Set to 1 if you want to simulate submitting messages, it's perfect for testing and debugging, it has no cost.

JSON

{
    "api_key":"399d2b438a53ebed3db8a7d52107f846",
    "report_url":"http://yourserver.com/callback/script",
    "landing_id":2749,
    "concat":1,
    "messages":[
        {
            "from":"GOOD PIZZA",
            "to":"34666666111",
            "text":"Hi John! See our new offers only available for you: {LANDING}",
            "send_at":"2018-02-18 17:30:00"
        },
        {
            "from":"GOOD PIZZA",
            "to":"34666666112",
            "text":"Hi Maria! See our new offers only available for you: {LANDING}",
            "custom":"MyMsgID-12345",
            "send_at":"2018-02-18 17:30:00"
        }
    ]
}

cURL

curl -X POST \
 -H 'Content-Type: application/json' \
 -H 'Accept: application/json' \
 -d '{
    "api_key":"399d2b438a53ebed3db8a7d52107f846",
    "report_url":"http://yourserver.com/callback/script",
    "landing_id":2749,
    "concat":1,
    "messages":[
        {
            "from":"GOOD PIZZA",
            "to":"34666666111",
            "text":"Hi John! See our new offers only available for you: {LANDING}",
            "send_at":"2018-02-18 17:30:00"
        },
        {
            "from":"GOOD PIZZA",
            "to":"34666666112",
            "text":"Hi Maria! See our new offers only available for you: {LANDING}",
            "custom":"MyMsgID-12345",
            "send_at":"2018-02-18 17:30:00"
        }
    ]
}' https://api.gateway360.com/api/3.0/sms/send-landing

PHP

$request = '{
    "api_key":"399d2b438a53ebed3db8a7d52107f846",
    "report_url":"http://yourserver.com/callback/script",
    "landing_id":2749,
    "concat":1,
    "messages":[
        {
            "from":"GOOD PIZZA",
            "to":"34666666111",
            "text":"Hi John! See our new offers only available for you: {LANDING}",
            "send_at":"2018-02-18 17:30:00"
        },
        {
            "from":"GOOD PIZZA",
            "to":"34666666112",
            "text":"Hi Maria! See our new offers only available for you: {LANDING}",
            "custom":"MyMsgID-12345",
            "send_at":"2018-02-18 17:30:00"
        }
    ]
}';
        	
$headers = array('Content-Type: application/json');        	

$ch = curl_init('https://api.gateway360.com/api/3.0/sms/send-landing');
curl_setopt($ch, CURLOPT_POST, 1);
curl_setopt($ch, CURLOPT_RETURNTRANSFER,true);
curl_setopt($ch, CURLOPT_HTTPHEADER, $headers);
curl_setopt($ch, CURLOPT_POSTFIELDS, $request);

$result = curl_exec($ch);
 
if (curl_errno($ch) != 0 ){
	die("curl error: ".curl_errno($ch));
}

Java

/** Imports */
import org.apache.http.HttpResponse;
import org.apache.http.client.HttpClient;
import org.apache.http.client.methods.HttpPost;
import org.apache.http.entity.StringEntity;
import org.apache.http.impl.client.HttpClientBuilder;
/** End imports */


HttpClient httpClient = HttpClientBuilder.create().build();
HttpPost request = new HttpPost("https://api.gateway360.com/api/3.0/sms/send-landing");

StringEntity params = new StringEntity(
"{" +
"    \"api_key\":\"399d2b438a53ebed3db8a7d52107f846\"," +
"    \"report_url\":\"http://yourserver.com/callback/script\"," +
"    \"landing_id\":2749," +
"    \"concat\":1," +
"    \"messages\":["  +
"		{"               +
"    		\"from\":\"GOOD PIZZA\"," +
"    		\"to\":\"34666666111\","  +
"    		\"text\":\"Hi John! See our new offers only available for you: {LANDING}\"," +
"    		\"send_at\":\"2018-02-18 17:30:00\""+
"		},"     +
"		{"               +
"    		\"from\":\"GOOD PIZZA\"," +
"    		\"to\":\"34666666112\","  +
"    		\"text\":\"Hi Maria! See our new offers only available for you: {LANDING}\"," +
"    		\"send_at\":\"2018-02-18 17:30:00\""+
"		}"     +
"	]"  +
"}");

request.addHeader("content-type", "application/json");
request.addHeader("Accept","application/json");
request.setEntity(params);
HttpResponse response = httpClient.execute(request);

RESPONSE

Parameters

status

The sending status of request - either "ok", "error"

result

Array of results in the same order you submitted.

status	The status of the message - either "ok", "error"
sms_id	Operator message id (with a maximum length of 32 characters). This is helpful for delivery reports.
custom	Custom field sent in request.
error_id	In case the status values "error" this param gives you the error id.
error_msg	In case the status values "error" this param has additional information. This param should be use just for debugging.

error_id

In case the status values "error" we will indicate you here the error id.

error_msg

In case the status values "error" this param has additional information. This param should be use just for debugging.

Example 1

200 OK

{
    "status":"ok",
    "result":[
        {
            "status":"ok",
            "sms_id":"1a8940dc7471427db3021cde5b464444",
            "custom":"test"
        },
        {
            "status":"ok",
            "sms_id":"1a8940dc7471427db3021cde5b464481",
            "custom":""
        }
    ]
}

Two messages successfully processed

Example 2

200 OK

{
    "status":"ok",
    "result":[
        {
            "status":"ok",
            "sms_id":"1a8940dc7471427db3021cde5b464444",
            "custom":"test"
        },
        {
            "status":"error",
            "error_id":"INVALID_SENDER",
            "error_msg":"Sender cannot exceed 11 alphanumeric or 15 numeric characters.",
            "custom":""
        },
        {
            "status":"error",
            "error_id":"INVALID_DESTINATION",
            "error_msg":"Destination number must be in international format.",
            "custom":"12345"
        },
        {
            "status":"error",
            "error_id":"NOT_ENOUGH_BALANCE",
            "error_msg":"Your account has no funds.",
            "custom":""
        },
        {
            "status":"error",
            "error_id":"INVALID_DATETIME",
            "error_msg":"Invalid datetime format.",
            "custom":""
        }
    ]
}

One message successfully processed, and the rest with several errors.

Example 3

401 Unauthorized

{
    "status":"error",
    "error_id":"UNAUTHORIZED",
    "error_msg":"Your API key may be invalid or your IP is blocked."
}

We didn't continue processing your request because your API Key wasn't valid.

Example 4

400 Bad Request

{
    "status":"error",
    "error_id":"JSON_PARSE_ERROR",
    "error_msg":"Your JSON was formatted incorrectly."
}

We couldn't process your request

GET REPORTS (SMS LANDING)

Once you have submitted a message and the message has been delivered to the handset, the operator responds with a delivery report. It could take seconds or 48 hours to receive the delivery report from the operator, depending on the network. In addition, SMS Landing can send you reports whenever your client will open the landing page and when he click in any link, map or action button of the landing page.

NOTE
To use this method you need to specify the url callback in the param "report_url" when
you send the message.

REQUEST TO YOUR SERVER

When we receive delivery reports we will send to your server instantly in batches, so each request can contain up to 1,000 delivery reports in a JSON format.

DLR REQUEST

Parameters

Array of delivery reports founds.

sms_id The message id.
from	The sender of the message you sent.
to	The destination number of the message you sent.
custom	The custom value of the message you sent.
sms_date	The date & time of the message you sent in the format: YYYY-MM-DD HH:MM:SS
status	The status of the message, check the following table to see possible values.
dlr_date	The date & time of the status.

JSON

[
    {
        "sms_id":"034d2acec0eb44af842de6a00bf4d934",
        "from":"SUPERGOL",
        "to":"34666666666",
        "custom":"YourReferenceID-774843",
        "sms_date":"2015-06-02 01:43:47",
        "status":"DELIVRD",
        "dlr_date":"2015-06-02 01:43:50"
    },
    {
        "sms_id":"034d2acec0eb44af842de6a00bf4d892",
        "from":"SUPERGOL",
        "to":"34666666666",
        "custom":"YourReferenceID-774849",
        "sms_date":"2015-06-02 01:43:47",
        "status":"DELIVRD",
        "dlr_date":"2015-06-02 01:43:49"
    }
]

Two delivery reports sent

STATUS VALUES

DELIVRD	Message delivered to destination.
ACCEPTD	Message is in accepted state, this state is temporary.
EXPIRED	Message validity period has expired, the expiration of a message is 48 hours if not specified.
DELETED	Message has been deleted due to the operator's reasons.
UNDELIV	Message wasn't delivered by SMSC, expiration, not reachable, operator problems, portability...
UNKNOWN	Message is in unknown state, the operator is trying, maybe the cellphone is turned off.
REJECTD	Message is in rejected state, the destination or the operator rejected the message.

LANDING OPEN REQUEST

Parameters

sms_id	The message id.
msisdn	The destination number of the message you sent and who has opened the landing page.
timestamp	The datetime when your client has opened the landing in the format: YYYY-MM-DD HH:MM:SS.
ip	The ip from the landing page has been opened.
city	The city from the landing page has been opened.
device	The device OS (Operative System) from the landing page has been opened.
user_agent	The user_agent of the device from the landing page has been opened.
brand	The brand of the device from the landing page has been opened.
model	The model of the device from the landing page has been opened.
full_name	The model full name of the device from the landing page has been opened.
marketing_name	The marketing name of the device from the landing page has been opened.

JSON

{
        "034d2acec0eb44af842de6a00bf4d934":
		{
		"msisdn":"34666666666",
		"timestamp":"2017-08-07 17:05:35",
		"ip":"8.8.8.8",
		"city":"Madrid",
		"device":"Android",
		"user_agent":"Mozilla/5.0 (Linux; Android 7.0; SAMSUNG SM-G950F Build/NRD90M) AppleWebKit/537.36",
		"brand":"Samsung",
		"model":"Galaxy S8",
		"full_name":"Samsung Galaxy S8",
		"marketing_name":"SAMSUNG SM-G950F"
	}
}

YOUR SERVER RESPONSE

In order to accept the delivery reports, your server must respond with HTTP status code 200 OK. If you cannot process the data at this time, for example, due to a database problem, you can return any other error such as status code 500. If a status code other than 200 is received, the request will be retried every 30 minutes for a period of 6 hours.

LANDING CLICK REQUEST

Parameters

sms_id	The message id.
msisdn	The destination number of the message you sent and who has opened the landing page.
timestamp	The datetime when your client has clicked the link in the format: YYYY-MM-DD HH:MM:SS.
click	The link (button, map, image...) which your client have clicked.

JSON

{
        "034d2acec0eb44af842de6a00bf4d934":
		{
		"msisdn":"34666666666",
		"timestamp":"2017-08-07 17:06:15",
		"click":"https://yourpage.com/more-information",
	}
}

YOUR SERVER RESPONSE

In order to accept the delivery reports, your server must respond with HTTP status code 200 OK. If you cannot process the data at this time, for example, due to a database problem, you can return any other error such as status code 500. If a status code other than 200 is received, the request will be retried every 30 minutes for a period of 6 hours.

SEND SMS SURVEY

With this method you can send bulk SMS Survey easily. This method has been extremely optimized to send more than 500.000 SMS in less than one hour. To send SMS Survey via API, you must first have it created in your account in your user panel, since you will need `survey_id` to send it.

ENDPOINT

https://api.gateway360.com/api/3.0/sms/send-survey

REQUEST

Parameters

api_key

Your API Key.

messages

Array of messages you want to send.

from	Originator address (sender). Up to 15 numeric or 11 alphanumeric characters. All characters non-ASCII will be replaced with its equivalent if exist any (á => a), empty in another case.
to	Destination mobile number in international format. Country code must be included.Ex: to=447525812121 when sending to UK.
text	Body of the text message including the tag {SURVEY} (with a maximum length of 459 characters). Ex: "Déjà vu, you can find it and more in our shop: {SURVEY}"
custom	Include any reference string for your reference. Useful for your internal reports. Maximum 32 alphanumeric characters.
send_at	When this message should be sent as timestamp in YYYY-MM-DD HH:MM:SS format. If you specify a time in the past, the message will be sent immediately.

survey_id

ID of the survey template created in your account.

campaign_name

Name of the campaign in case your want to group more than one SMS in a unique campaign to see it in your panel (otherway no one campaign will be created).

report_url

URL where you want to receive the delivery report (DLR) and the events of the survey as your client open it or complete it.

concat

Set to 1 if you want to allow concatenated messages (more than 160 characters). If concat is 0 (or it's not present) only first 160 chars will be sent.

encoding

Set to UCS2 if you want to send messages UCS2 (70 Unicode characters per SMS) with accents, emoticons and special characters. If encoding is GSM7 (or it's not present) the SMS will be treated as GSM7 (160 non Unicode characters per SMS). The Unicode encoding is only applicable to the text of message

fake

Set to 1 if you want to simulate submitting messages, it's perfect for testing and debugging, it has no cost.

JSON

{
    "api_key":"399d2b438a53ebed3db8a7d52107f846",
    "report_url":"http://yourserver.com/callback/script",
    "survey_id":573,
    "concat":1,
    "messages":[
        {
            "from":"GOOD PIZZA",
            "to":"34666666111",
            "text":"Hi John, thanks for your order! Please, complete this survey to improve our service: {SURVEY}",
            "send_at":"2018-02-18 17:30:00"
        },
        {
            "from":"GOOD PIZZA",
            "to":"34666666112",
            "text":"Hi Maria, thanks for your order! Please, complete this survey to improve our service: {SURVEY}",
            "custom":"MyMsgID-12345",
            "send_at":"2018-02-18 17:30:00"
        }
    ]
}

PHP

$request = '{
    "api_key":"399d2b438a53ebed3db8a7d52107f846",
    "report_url":"http://yourserver.com/callback/script",
    "survey_id":573,
    "concat":1,
    "messages":[
        {
            "from":"GOOD PIZZA",
            "to":"34666666111",
            "text":"Hi John, thanks for your order! Please, complete this survey to improve our service: {SURVEY}",
            "send_at":"2018-02-18 17:30:00"
        },
        {
            "from":"GOOD PIZZA",
            "to":"34666666112",
            "text":"Hi Maria, thanks for your order! Please, complete this survey to improve our service: {SURVEY}",
            "custom":"MyMsgID-12345",
            "send_at":"2018-02-18 17:30:00"
        }
    ]
}';
        	
$headers = array('Content-Type: application/json');        	

$ch = curl_init('https://api.gateway360.com/api/3.0/sms/send-survey');
curl_setopt($ch, CURLOPT_POST, 1);
curl_setopt($ch, CURLOPT_RETURNTRANSFER,true);
curl_setopt($ch, CURLOPT_HTTPHEADER, $headers);
curl_setopt($ch, CURLOPT_POSTFIELDS, $request);

$result = curl_exec($ch);
 
if (curl_errno($ch) != 0 ){
	die("curl error: ".curl_errno($ch));
}

JAVA

/** Imports */
import org.apache.http.HttpResponse;
import org.apache.http.client.HttpClient;
import org.apache.http.client.methods.HttpPost;
import org.apache.http.entity.StringEntity;
import org.apache.http.impl.client.HttpClientBuilder;
/** End imports */


HttpClient httpClient = HttpClientBuilder.create().build();
HttpPost request = new HttpPost("https://api.gateway360.com/api/3.0/sms/send-survey");

StringEntity params = new StringEntity(
"{" +
"    \"api_key\":\"399d2b438a53ebed3db8a7d52107f846\"," +
"    \"report_url\":\"http://yourserver.com/callback/script\"," +
"    \"survey_id\":573," +
"    \"concat\":1," +
"    \"messages\":["  +
"		{"               +
"    		\"from\":\"GOOD PIZZA\"," +
"    		\"to\":\"34666666111\","  +
"    		\"text\":\"Hi John, today 2x1 in pizzas, watch the game like a boss with our new pepperoni pizza!\"," +
"    		\"send_at\":\"2018-02-18 17:30:00\""+
"		},"     +
"		{"               +
"    		\"from\":\"GOOD PIZZA\"," +
"    		\"to\":\"34666666112\","  +
"    		\"text\":\"Hi Maria, , today 2x1 in pizzas, watch the game like a boss with our new pepperoni pizza!\"," +
"    		\"send_at\":\"2018-02-18 17:30:00\""+
"		}"     +
"	]"  +
"}");

request.addHeader("content-type", "application/json");
request.addHeader("Accept","application/json");
request.setEntity(params);
HttpResponse response = httpClient.execute(request);

RESPONSE

status

The sending status of request - either "ok", "error"

result

Array of results in the same order you submitted.

status	The status of the message - either "ok", "error"
sms_id	Operator message id (with a maximum length of 32 characters). This is helpful for delivery reports.
custom	Custom field sent in request.
error_id	In case the status values "error" this param gives you the error id.
error_msg	In case the status values "error" this param has additional information. This param should be use just for debugging.

error_id

In case the status values "error" we will indicate you here the error id.

error_msg

In case the status values "error" this param has additional information. This param should be use just for debugging.

Example 1

200 OK

{
    "status":"ok",
    "result":[
        {
            "status":"ok",
            "sms_id":"1a8940dc7471427db3021cde5b464444",
            "custom":"test"
        },
        {
            "status":"ok",
            "sms_id":"1a8940dc7471427db3021cde5b464481",
            "custom":""
        }
    ]
}

Two messages successfully processed

Example 2

200 OK

{
    "status":"ok",
    "result":[
        {
            "status":"ok",
            "sms_id":"1a8940dc7471427db3021cde5b464444",
            "custom":"test"
        },
        {
            "status":"error",
            "error_id":"INVALID_SENDER",
            "error_msg":"Sender cannot exceed 11 alphanumeric or 15 numeric characters.",
            "custom":""
        },
        {
            "status":"error",
            "error_id":"INVALID_DESTINATION",
            "error_msg":"Destination number must be in international format.",
            "custom":"12345"
        },
        {
            "status":"error",
            "error_id":"NOT_ENOUGH_BALANCE",
            "error_msg":"Your account has no funds.",
            "custom":""
        },
        {
            "status":"error",
            "error_id":"INVALID_DATETIME",
            "error_msg":"Invalid datetime format.",
            "custom":""
        }
    ]
}

One message successfully processed, and the rest with several errors.

Example 3

401 Unauthorized

{
    "status":"error",
    "error_id":"UNAUTHORIZED",
    "error_msg":"Your API key may be invalid or your IP is blocked."
}

We didn't continue processing your request because your API Key wasn't valid.

Example 4

400 Bad Request

{
    "status":"error",
    "error_id":"JSON_PARSE_ERROR",
    "error_msg":"Your JSON was formatted incorrectly."
}

We couldn't process your request

ERRORS

Error ID	Explanation
INVALID_CONTENT_TYPE	The content type must be: Content-Type: application/json
JSON_PARSE_ERROR	Your JSON was formatted incorrectly or was considered otherwise improper or incomplete. Check it here.
MISSING_PARAMS	Your request is incomplete and missing some mandatory parameters.
BAD_PARAMS	One or more of your parameters has incorrect format or value.
UNAUTHORIZED	correctly or see if the IP is blocked in your account API settings.
INVALID_SENDER	The sender address (from parameter) was not allowed for this message.
INVALID_DESTINATION	Our Gateway was unable to process your destination. The number must be in MSISDN format. Check format here.
INVALID_TEXT	The field was empty or is corrupt.
INVALID_DATETIME	The format we were expecting was: YYYY-MM-DD HH:MM:SS
NOT_ENOUGH_BALANCE	Your account has no funds to process this request, add credits to your account and try again.
LIMIT_EXCEEDED	Your request has exceeded the maximum of 1000 sms requests per batch.

SPECIAL LONG CHARACTERS

There are 9 special characters that are counted as 2 individual characters when GSM encoded. This could result in a message becoming longer and therefore being concatenated.The following table identifies these characters.

Symbol	Name	Symbol	Name
[	Open square	\|	Vertical bar
\	Backslash	}	Right brace
]	Close square	~	Tilde
^	Caret	€	Euro symbol
{	Left brace

GSM ENCODING

According to GSM specification, a standard SMS message can contain up to 140 bytes of data (payload). Standard latin (ISO-8859-1) character encoding represents a single character using 1 byte, which is 8 bits. Therefore, the maximum number of latin 1 characters that could be included in an sms is 140.

GSM encoding represents characters using 7 bits instead of 8. This therefore provides a maximum of 160 characters per SMS. (140 * 8 bits) / 7 bits = 160

This effectively halves the number of characters that the GSM character set can support, compared to ISO-8859-1. In order to include common characters that are usually represented using the 8th bit, these characters as well as other symbol characters must be re-mapped to a combination of lower bits. These re-mapped characters are often referred to as special characters. This re-mapping, in combination with packing 7-bit characters into 8- bit bytes is called GSM Encoding.

NOTE
The below table lists the 7-bit default alphabet as specified by GSM 03.38

Hex	Character name	Character	ISO-8859-1 Hex
0x00	COMMERCIAL AT	@	40
0x01	POUND SIGN	£	A3
0x02	DOLLAR SIGN	$	24
0x03	YEN SIGN	¥	A5
0x04	LATIN SMALL LETTER E WITH GRAVE	è	E8
0x05	LATIN SMALL LETTER E WITH ACUTE	é	E9
0x06	LATIN SMALL LETTER U WITH GRAVE	ù	F9
0x07	LATIN SMALL LETTER I WITH GRAVE	ì	EC
0x08	LATIN SMALL LETTER O WITH GRAVE	ò	F2
0x09	LATIN SMALL LETTER C WITH CEDILLA (casechanged)	Ç	C7
0x0A	Line Feed		A
0x0B	LATIN CAPITAL LETTER O WITH STROKE	Ø	D8
0x0C	LATIN SMALL LETTER O WITH STROKE	ø	F8
0x0D	Carriage Return		D
0x0E	LATIN CAPITAL LETTER A WITH RING ABOVE	Å	C5
0x0F	LATIN SMALL LETTER A WITH RING ABOVE	å	E5
0x10	GREEK CAPITAL LETTER	Δ
0x11	LOW LINE	_	5F
0x12	GREEK CAPITAL LETTER	Φ
0x13	GREEK CAPITAL LETTER	Γ
0x14	GREEK CAPITAL LETTER	Λ
0x15	GREEK CAPITAL LETTER	Ω
0x16	GREEK CAPITAL LETTER	Π
0x17	GREEK CAPITAL LETTER	Ψ
0x18	GREEK CAPITAL LETTER	Σ
0x19	GREEK CAPITAL LETTER	Θ
0x1A	GREEK CAPITAL LETTER	Ξ
0x1B	ESCAPE TO EXTENSION
0x1B0A	FORM FEED		12
0x1B14	CIRCUMFLEX ACCENT	^	5E
0x1B28	LEFT CURLY BRACKET	{	7B
0x1B29	RIGHT CURLY BRACKET	}	7D
0x1B2F	REVERSE SOLIDUS (BACKSLASH)	\	5C
0x1B3C	LEFT SQUARE BRACKET	[	5B
0x1B3D	TILDE	~	7E
0x1B3E	RIGHT SQUARE BRACKET	]	5D
0x1B40	VERTICAL BAR	\|	7C
0x1B65	EURO SIGN	€	A4 (ISO-8859-15)
0x1C	LATIN CAPITAL LETTER AE	Æ	C6
0x1D	LATIN SMALL LETTER AE	æ	E6
0x1E	LATIN SMALL LETTER SHARP S (German)	ß	DF
0x1F	LATIN CAPITAL LETTER E WITH ACUTE	É	C9
0x20	SPACE		20
0x21	EXCLAMATION MARK	!	21
0x22	QUOTATION MARK	"	22
0x23	NUMBER SIGN	#	23
0x25	PERCENT SIGN	%	25
0x26	AMPERSAND	&	26
0x27	APOSTROPHE		27
0x28	LEFT PARENTHESIS	(	28
0x29	RIGHT PARENTHESIS	)	29
0x2A	ASTERISK	*	2A
0x2B	PLUS SIGN	+	2B
0x2C	COMMA	,	2C
0x2D	HYPHEN-MINUS	-	2D
0x2E	FULL STOP	.	2E
0x2F	SOLIDUS (SLASH)	/	2F
0x30	DIGIT ZERO	0	30
0x31	DIGIT ONE	1	31
0x32	DIGIT TWO	2	32
0x33	DIGIT THREE	3	33
0x34	DIGIT FOUR	4	34
0x35	DIGIT FIVE	5	35
0x36	DIGIT SIX	6	36
0x37	DIGIT SEVEN	7	37
0x38	DIGIT EIGHT	8	38
0x39	DIGIT NINE	9	39
0x3A	COLON	:	3A
0x3B	SEMICOLON	;	3B
0x3C	LESS-THAN SIGN	<	3C
0x3D	EQUALS SIGN	=	3D
0x3E	GREATER-THAN SIGN	>	3E
0x3F	QUESTION MARK	?	3F
0x40	INVERTED EXCLAMATION MARK	¡	A1
0x41	LATIN CAPITAL LETTER A	A	41
0x42	LATIN CAPITAL LETTER B	B	42
0x43	LATIN CAPITAL LETTER C	C	43
0x44	LATIN CAPITAL LETTER D	D	44
0x45	LATIN CAPITAL LETTER E	E	45
0x46	LATIN CAPITAL LETTER F	F	46
0x47	LATIN CAPITAL LETTER G	G	47
0x48	LATIN CAPITAL LETTER H	H	48
0x49	LATIN CAPITAL LETTER I	I	49
0x4A	LATIN CAPITAL LETTER J	J	4A
0x4B	LATIN CAPITAL LETTER K	K	4B
0x4C	LATIN CAPITAL LETTER L	L	4C
0x4D	LATIN CAPITAL LETTER M	M	4D
0x4E	LATIN CAPITAL LETTER N	N	4E
0x4F	LATIN CAPITAL LETTER O	O	4F
0x50	LATIN CAPITAL LETTER P	P	50
0x51	LATIN CAPITAL LETTER Q	Q	51
0x52	LATIN CAPITAL LETTER R	R	52
0x53	LATIN CAPITAL LETTER S	S	53
0x54	LATIN CAPITAL LETTER T	T	54
0x55	LATIN CAPITAL LETTER U	U	55
0x56	LATIN CAPITAL LETTER V	V	56
0x57	LATIN CAPITAL LETTER W	W	57
0x58	LATIN CAPITAL LETTER X	X	58
0x59	LATIN CAPITAL LETTER Y	Y	59
0x5A	LATIN CAPITAL LETTER Z	Z	5A
0x5B	LATIN CAPITAL LETTER A WITH DIAERESIS	Ä	C4
0x5C	LATIN CAPITAL LETTER O WITH DIAERESIS	Ö	D6
0x5D	LATIN CAPITAL LETTER N WITH TILDE	Ñ	D1
0x5E	LATIN CAPITAL LETTER U WITH DIAERESIS	Ü	DC
0x5F	SECTION SIGN	§	A7
0x60	INVERTED QUESTION MARK	¿	BF
0x61	LATIN SMALL LETTER A	a	61
0x62	LATIN SMALL LETTER B	b	62
0x63	LATIN SMALL LETTER C	c	63
0x64	LATIN SMALL LETTER D	d	64
0x65	LATIN SMALL LETTER E	e	65
0x66	LATIN SMALL LETTER F	f	66
0x67	LATIN SMALL LETTER G	g	67
0x68	LATIN SMALL LETTER H	h	68
0x69	LATIN SMALL LETTER I	i	69
0x6A L	ATIN SMALL LETTER J	j	6A
0x6B	LATIN SMALL LETTER K	k	6B
0x6C	LATIN SMALL LETTER L	l	6C
0x6D	LATIN SMALL LETTER M	m	6D
0x6E	LATIN SMALL LETTER N	n	6E
0x6F	LATIN SMALL LETTER O	o	6F
0x70	LATIN SMALL LETTER P	p	70
0x71	LATIN SMALL LETTER Q	q	71
0x72	LATIN SMALL LETTER R	r	72
0x73	LATIN SMALL LETTER S	s	73
0x74	LATIN SMALL LETTER T	t	74
0x75	LATIN SMALL LETTER U	u	75
0x76	LATIN SMALL LETTER V	v	76
0x77	LATIN SMALL LETTER W	w	77
0x78	LATIN SMALL LETTER X	x	78
0x79	LATIN SMALL LETTER Y	y	79
0x7A	LATIN SMALL LETTER Z	z	7A
0x7B	LATIN SMALL LETTER A WITH DIAERESIS	ä	E4
0x7C	LATIN SMALL LETTER O WITH DIAERESIS	ö	F6
0x7D	LATIN SMALL LETTER N WITH TILDE	ñ	F1
0x7E	LATIN SMALL LETTER U WITH DIAERESIS	ü	FC
0x7F	LATIN SMALL LETTER A WITH GRAVE	à	E0

UCS2 ENCODING

UCS2 is the Unicode format required for SMS, as opposed to the later format UTF-16. Since each UCS2 character requires 2 bytes, the SMS message length is reduced to 70 characters: 140 bytes / 2 bytes = 70 characters. You must also set the correct Data Coding Scheme value, 0 x 08 or 8 in the case of UCS2. UCS2 encoding allows the use of emoticons in SMS and these are treated as characters so you can write it in your SMS as any other character. Unicode messages can be concatenated. The concatenation headers reduce the characters available for content as follows:

Number of SMS	Maximum Message Length
1	70 characters.
2	134 characters.
3	201 characters.
4	268 characters.
5	335 characters.
6	402 characters.
7	469 characters.
8	536 characters.

GET REPORTS (SMS SURVEY)

Once you have submitted a message and the message has been delivered to the handset, the operator responds with a delivery report. It could take seconds or 48 hours to receive the delivery report from the operator, depending on the network. In addition, SMS Landing can send you reports whenever your client will open the landing page and when he click in any link, map or action button of the landing page.

NOTE
To use this method you need to specify the url callback in the param "report_url" when
you send the message.

REQUEST TO YOUR SERVER

When we receive delivery reports we will send to your server instantly in batches, so each request can contain up to 1,000 delivery reports in a JSON format.

DLR REQUEST

Parameters

Array of delivery reports founds.

sms_id	The message id.
from	The sender of the message you sent.
to	The destination number of the message you sent.
custom	The custom value of the message you sent.
sms_date	The date & time of the message you sent in the format: YYYY-MM-DD HH:MM:SS
status	The status of the message, check the following table to see possible values.
dlr_date	The date & time of the status.

JSON

[
    {
        "sms_id":"034d2acec0eb44af842de6a00bf4d934",
        "from":"SUPERGOL",
        "to":"34666666666",
        "custom":"YourReferenceID-774843",
        "sms_date":"2015-06-02 01:43:47",
        "status":"DELIVRD",
        "dlr_date":"2015-06-02 01:43:50"
    },
    {
        "sms_id":"034d2acec0eb44af842de6a00bf4d892",
        "from":"SUPERGOL",
        "to":"34666666666",
        "custom":"YourReferenceID-774849",
        "sms_date":"2015-06-02 01:43:47",
        "status":"DELIVRD",
        "dlr_date":"2015-06-02 01:43:49"
    }
]

Two delivery reports sent

STATUS VALUES

DELIVRD	Message delivered to destination.
ACCEPTD	Message is in accepted state, this state is temporary.
EXPIRED	Message validity period has expired, the expiration of a message is 48 hours if not specified.
DELETED	Message has been deleted due to the operator's reasons.
UNDELIV	Message wasn't delivered by SMSC, expiration, not reachable, operator problems, portability...
UNKNOWN	Message is in unknown state, the operator is trying, maybe the cellphone is turned off.
REJECTD	Message is in rejected state, the destination or the operator rejected the message.

SURVEY OPEN REQUEST

Parameters

sms_id	The message id.
msisdn	The destination number of the message you sent and who has opened the survey page.
timestamp	The datetime when your client has opened the survey in the format: YYYY-MM-DD HH:MM:SS.
ip	The ip from the survey page has been opened.
city	The city from the survey page has been opened.
device	The device OS (Operative System) from the survey page has been opened.
user_agent	The user_agent of the device from the survey page has been opened.
brand	The brand of the device from the survey page has been opened.
model	The model of the device from the survey page has been opened.
full_name	The model full name of the device from the survey page has been opened.
marketing_name	The marketing name of the device from the survey page has been opened.

JSON

{
        "034d2acec0eb44af842de6a00bf4d934":
		{
		"msisdn":"34666666666",
		"timestamp":"2017-08-07 17:05:35",
		"ip":"8.8.8.8",
		"city":"Madrid",
		"device":"Android",
		"user_agent":"Mozilla/5.0 (Linux; Android 7.0; SAMSUNG SM-G950F Build/NRD90M) AppleWebKit/537.36",
		"brand":"Samsung",
		"model":"Galaxy S8",
		"full_name":"Samsung Galaxy S8",
		"marketing_name":"SAMSUNG SM-G950F"
	}
}

SURVEY COMPLETED REQUEST

The response obtained in this request will depends of the structure of the survey created in your account and the sequence of those fields will be the same, being this the list of possible fields:

checkbox-X
radio-X
textarea-X
select-X
date-X
time-X

X value corresponds to an identifier of the number of elements of that type, starting at 1

Parameters

sms_id	The message id.
msisdn	The destination number of the message you sent and who has opened the landing page.
timestamp	The datetime when your client has completed the survey in the format: YYYY-MM-DD HH:MM:SS.
response	The objects returned in this parameter will depend on the survey as well as its fields.

JSON

{
        "034d2acec0eb44af842de6a00bf4d934":
		{
		"msisdn":"34666666666",
		"timestamp":"2017-08-07 16:54:53",
		"response":{
			"radio-1": {
				"type": "radio",
				"question": "Have you bought in our shop before?",
				"answers": {
				  "predefined": [
					"No"
				  ]
				}
			  },
			  "textarea-1": {
				"type": "textarea",
				"question": "How did you find the purchase process?",
				"answers": {
				  "predefined": [
					"Really good and simple"
				  ]
				}
			  },
			  "radio-2": {
				"type": "radio",
				"question": "On a scale from 1 to 10, what score would you give us?",
				"answers": {
				  "predefined": [
					"9"
				  ]
				}
			  },
			  "checkbox-1": {
				"type": "checkbox",
				"question": "What did you like most about our brand?",
				"answers": {
				  "predefined": [
					"Simplicity",
					"Price"
				  ],
				  "other": [
					"You're awesome!"
				  ]
				}
			  }
		}
	}
}

YOUR SERVER RESPONSE

In order to accept the delivery reports, your server must respond with HTTP status code 200 OK. If you cannot process the data at this time, for example, due to a database problem, you can return any other error such as status code 500. If a status code other than 200 is received, the request will be retried every 30 minutes for a period of 6 hours.

SEND SMS LINK

With this method you can send bulk SMS Link easily. This method has been extremely optimized to send more than 500.000 SMS in less than one hour.

ENDPOINT

https://api.gateway360.com/api/3.0/sms/send-link

REQUEST

Parameters

api_key	Your API Key.
messages	Array of messages you want to send.
	from	Originator address (sender). Up to 15 numeric or 11 alphanumeric characters. All characters non-ASCII will be replaced with its equivalent if exist any (á => a), empty in another case.
	to	Destination mobile number in international format. Country code must be included.Ex: to=447525812121 when sending to UK.
	text	Body of the text message including the tag {LINK} (with a maximum length of 459 characters). Ex: "Déjà vu, you can find it and more in our shop: {LINK}"
	custom	Include any reference string for your reference. Useful for your internal reports. Maximum 32 alphanumeric characters.
	send_at	When this message should be sent as timestamp in YYYY-MM-DD HH:MM:SS format. If you specify a time in the past, the message will be sent immediately.
link	URL you want to track when your client has click on it to access.
campaign_name	Name of the campaign in case your want to group more than one SMS in a unique campaign to see it in your panel (otherway no one campaign will be created).
report_url	URL where you want to receive the delivery report (DLR) and the event of the link as your client open it.
concat	Set to 1 if you want to allow concatenated messages (more than 160 characters). If concat is 0 (or it's not present) only first 160 chars will be sent.
encoding	Set to UCS2 if you want to send messages UCS2 (70 Unicode characters per SMS) with accents, emoticons and special characters. If encoding is GSM7 (or it's not present) the SMS will be treated as GSM7 (160 non Unicode characters per SMS). The Unicode encoding is only applicable to the text of message.
fake	Set to 1 if you want to simulate submitting messages, it's perfect for testing and debugging, it has no cost.
	Mandatory
	Optional

JSON

{
 " api_key ": "399d2b438a53ebed3db8a7d52107f846" ,
 " report_url ": "http://yourserver.com/callback/script" ,
 " link ": "https://www.ebay.es" ,
 " concat ": 1 ,
 " messages ": [
 {
 "from":"GOOD PIZZA",
 "to":"34666666111",
 "text":"Hi John! See our new offers only available for you: {LINK
}",
 "send_at":"2018-02-18 17:30:00"
 },
 {
 "from":"GOOD PIZZA",
 "to":"34666666112",
 "text":"Hi Maria! See our new offers only available for you: {LIN
K}",
 "custom":"MyMsgID-12345",
 "send_at":"2018-02-18 17:30:00"
 }
 ]
}

PHP

$request = '{
    "api_key":"399d2b438a53ebed3db8a7d52107f846",
    "report_url":"http://yourserver.com/callback/script",
    "link":"https://www.ebay.es",
    "concat":1,
    "messages":[
        {
            "from":"GOOD PIZZA",
            "to":"34666666111",
            "text":"Hi John! See our new offers only available for you: {LINK}",
            "send_at":"2018-02-18 17:30:00"
        },
        {
            "from":"GOOD PIZZA",
            "to":"34666666112",
            "text":"Hi Maria! See our new offers only available for you: {LINK}",
            "custom":"MyMsgID-12345",
            "send_at":"2018-02-18 17:30:00"
        }
    ]
}';
        	
$headers = array('Content-Type: application/json');        	

$ch = curl_init('https://api.gateway360.com/api/3.0/sms/send-link');
curl_setopt($ch, CURLOPT_POST, 1);
curl_setopt($ch, CURLOPT_RETURNTRANSFER,true);
curl_setopt($ch, CURLOPT_HTTPHEADER, $headers);
curl_setopt($ch, CURLOPT_POSTFIELDS, $request);

$result = curl_exec($ch);
 
if (curl_errno($ch) != 0 ){
	die("curl error: ".curl_errno($ch));
}

JAVA

/** Imports */
import org.apache.http.HttpResponse;
import org.apache.http.client.HttpClient;
import org.apache.http.client.methods.HttpPost;
import org.apache.http.entity.StringEntity;
import org.apache.http.impl.client.HttpClientBuilder;
/** End imports */


HttpClient httpClient = HttpClientBuilder.create().build();
HttpPost request = new HttpPost("https://api.gateway360.com/api/3.0/sms/send-link");

StringEntity params = new StringEntity(
"{" +
"    \"api_key\":\"399d2b438a53ebed3db8a7d52107f846\"," +
"    \"report_url\":\"http://yourserver.com/callback/script\"," +
"    \"link\":\"https://ebay.es\"," +
"    \"concat\":1," +
"    \"messages\":["  +
"		{"               +
"    		\"from\":\"GOOD PIZZA\"," +
"    		\"to\":\"34666666111\","  +
"    		\"text\":\"Hi John! See our new offers only available for you: {LINK}\"," +
"    		\"send_at\":\"2018-02-18 17:30:00\""+
"		},"     +
"		{"               +
"    		\"from\":\"GOOD PIZZA\"," +
"    		\"to\":\"34666666112\","  +
"    		\"text\":\"Hi Maria! See our new offers only available for you: {LINK}\"," +
"    		\"send_at\":\"2018-02-18 17:30:00\""+
"		}"     +
"	]"  +
"}");

request.addHeader("content-type", "application/json");
request.addHeader("Accept","application/json");
request.setEntity(params);
HttpResponse response = httpClient.execute(request);

RESPONSE

Parameters

status	The sending status of request - either "ok", "error"
result	Array of results in the same order you submitted.
	status	The status of the message - either "ok", "error"
	sms_id	Operator message id (with a maximum length of 32 characters). This is helpful for delivery reports.
	custom	Custom field sent in request.
	error_id	In case the status values "error" this param gives you the error id.
	error_msg	In case the status values "error" this param has additional information. This param should be use just for debugging.
error_id	In case the status values "error" we will indicate you here the error id.
error_msg	In case the status values "error" this param has additional information. This param should be use just for debugging.

EXAMPLES

200 OK

{
    "status":"ok",
    "result":[
        {
            "status":"ok",
            "sms_id":"1a8940dc7471427db3021cde5b464444",
            "custom":"test"
        },
        {
            "status":"ok",
            "sms_id":"1a8940dc7471427db3021cde5b464481",
            "custom":""
        }
    ]
}

Two messages successfully processed

200 OK

{
 " status ": "ok" ,
 " result ": [
 {
 "status":"ok",
 "sms_id":"1a8940dc7471427db3021cde5b464444",
 "custom":"test"
 },
 {
 "status":"error",
 "error_id":"INVALID_SENDER",
 "error_msg":"Sender cannot exceed 11 alphanumeric or 15 numeric c
haracters.",
 "custom":""
 },
 {
 "status":"error",
 "error_id":"INVALID_DESTINATION",
 "error_msg":"Destination number must be in international format."
,
 "custom":"12345"
 },
 {
 "status":"error",
 "error_id":"NOT_ENOUGH_BALANCE",
 "error_msg":"Your account has no funds.",
 "custom":""
 },
 {
 "status":"error",
 "error_id":"INVALID_DATETIME",
 "error_msg":"Invalid datetime format.",
 "custom":""
 }
 ]
}

One message successfully processed, and the rest with several errors.

401 Unauthorized

{
 " status ": "error" ,
 " error_id ": "UNAUTHORIZED" ,
 " error_msg ": "Your API key may be invalid or your IP is blocked."
}

We didn't continue processing your request because your API Key wasn't valid

400 Bad Request

{
 " status ": "error" ,
 " error_id ": "JSON_PARSE_ERROR" ,
 " error_msg ": "Your JSON was formatted incorrectly."
}

We couldn't process your request.

ERRORS

Error ID	Explanation
INVALID_CONTENT_TYPE	The content type must be: Content-Type: application/json
JSON_PARSE_ERROR	https://jsonlint.com/
MISSING_PARAMS	Your request is incomplete and missing some mandatory parameters.
BAD_PARAMS	One or more of your parameters has incorrect format or value.
UNAUTHORIZED	Your API key may be invalid, double-check that your API key was input correctly or see if the IP is blocked in your account API settings
INVALID_SENDER	The sender address (from parameter) was not allowed for this message
INVALID_DESTINATION	https://en.wikipedia.org/wiki/MSISDN
INVALID_TEXT	The field was empty or is corrupt.
INVALID_DATETIME	The format we were expecting was: YYYY-MM-DD HH:MM:SS
NOT_ENOUGH_BALANCE	Your account has no funds to process this request, add credits to your account and try again.
LIMIT_EXCEEDED	Your request has exceeded the maximum of 1000 sms requests per batch.

SPECIAL LONG CHARACTERS

There are 9 special characters that are counted as 2 individual characters when GSM encoded. This could result in a message becoming longer and therefore being concatenated.The following table identifies these characters.

Symbol	Name	Symbol	Name
[	Open square		Vertical bar
\	Backslash	}	Right brace
]	Close square	~	Tilde
^	Caret	€	Euro symbol
{	Left brace

CONCATENATED GSM MESSAGES

Also referred to as a long message, multipart message or extended message, a concatenated message is formed from several standard SMS containing a 7 byte concatenation header at the beginning of each one. Since this 7 byte header is within the message, it reduces the total size of each SMS to 153 characters each. The table below shows the maximum message length per number of SMS used for plain 7-bit messages. If you want to send a concatenated message, don’t forget you must set the parameter "concat" to value 1.

Number of SMS	Maximum Message Length
1	160 characters.
2	306 characters.
3	459 characters.
4	612 characters.
5	765 characters.
6	918 characters.
7	1071 characters.
8	1224 characters.

GSM ENCODING

According to GSM specification, a standard SMS message can contain up to 140 bytes of data (payload). Standard latin (ISO-8859-1) character encoding represents a single character using 1 byte, which is 8 bits. Therefore, the maximum number of latin 1 characters that could be included in an sms is 140. GSM encoding represents characters using 7 bits instead of 8. This therefore provides a maximum of 160 characters per SMS. (140 * 8 bits) / 7 bits = 160 This effectively halves the number of characters that the GSM character set can support, compared to ISO-8859-1. In order to include common characters that are usually represented using the 8th bit, these characters as well as other symbol characters must be re-mapped to a combination of lower bits. These re-mapped characters are often referred to as special characters. This re-mapping, in combination with packing 7-bit characters into 8- bit bytes is called GSM Encoding.

NOTE
The below table lists the 7-bit default alphabet as specified by [https://en.wikipedia.org/wiki/GSM_03.38 GSM 03.38]

Hex	Character name	Character	ISO-8859-1 Hex
0x00	COMMERCIAL AT	@	40
0x01	POUND SIGN	£	A3
0x02	DOLLAR SIGN	$	24
0x03	YEN SIGN	¥	A5
0x04	LATIN SMALL LETTER E WITH GRAVE	è	E8
0x05	LATIN SMALL LETTER E WITH ACUTE	é	E9
0x06	LATIN SMALL LETTER U WITH GRAVE	ù	F9
0x07	LATIN SMALL LETTER I WITH GRAVE	ì	EC
0x08	LATIN SMALL LETTER O WITH GRAVE	ò	F2
0x09	LATIN SMALL LETTER C WITH CEDILLA (casechanged)	Ç	C7
0x0A	Line Feed		A
0x0B	LATIN CAPITAL LETTER O WITH STROKE	Ø	D8
0x0C	LATIN SMALL LETTER O WITH STROKE	ø	F8
0x0D	Carriage Return		D
0x0E	LATIN CAPITAL LETTER A WITH RING ABOVE	Å	C5
0x0F	LATIN SMALL LETTER A WITH RING ABOVE	å	E5
0x10	GREEK CAPITAL LETTER	Δ
0x11	LOW LINE	_	5F
0x12	GREEK CAPITAL LETTER	Φ
0x13	GREEK CAPITAL LETTER	Γ
0x14	GREEK CAPITAL LETTER	Λ
0x15	GREEK CAPITAL LETTER	Ω
0x16	GREEK CAPITAL LETTER	Π
0x17	GREEK CAPITAL LETTER	Ψ
0x18	GREEK CAPITAL LETTER	Σ
0x19	GREEK CAPITAL LETTER	Θ
0x1A	GREEK CAPITAL LETTER	Ξ
0x1B	ESCAPE TO EXTENSION
0x1B0A	FORM FEED		12
0x1B14	CIRCUMFLEX ACCENT	^	5E
0x1B28	LEFT CURLY BRACKET	{	7B
0x1B29	RIGHT CURLY BRACKET	}	7D
0x1B2F	REVERSE SOLIDUS (BACKSLASH)	\	5C
0x1B3C	LEFT SQUARE BRACKET	[	5B
0x1B3D	TILDE	~	7E
0x1B3E	RIGHT SQUARE BRACKET	]	5D
0x1B40	VERTICAL BAR	\|	7C
0x1B65	EURO SIGN	€	A4 (ISO-8859-15)
0x1C	LATIN CAPITAL LETTER AE	Æ	C6
0x1D	LATIN SMALL LETTER AE	æ	E6
0x1E	LATIN SMALL LETTER SHARP S (German)	ß	DF
0x1F	LATIN CAPITAL LETTER E WITH ACUTE	É	C9
0x20	SPACE		20
0x21	EXCLAMATION MARK	!	21
0x22	QUOTATION MARK	"	22
0x23	NUMBER SIGN	#	23
0x25	PERCENT SIGN	%	25
0x26	AMPERSAND	&	26
0x27	APOSTROPHE		27
0x28	LEFT PARENTHESIS	(	28
0x29	RIGHT PARENTHESIS	)	29
0x2A	ASTERISK	*	2A
0x2B	PLUS SIGN	+	2B
0x2C	COMMA	,	2C
0x2D	HYPHEN-MINUS	-	2D
0x2E	FULL STOP	.	2E
0x2F	SOLIDUS (SLASH)	/	2F
0x30	DIGIT ZERO	0	30
0x31	DIGIT ONE	1	31
0x32	DIGIT TWO	2	32
0x33	DIGIT THREE	3	33
0x34	DIGIT FOUR	4	34
0x35	DIGIT FIVE	5	35
0x36	DIGIT SIX	6	36
0x37	DIGIT SEVEN	7	37
0x38	DIGIT EIGHT	8	38
0x39	DIGIT NINE	9	39
0x3A	COLON	:	3A
0x3B	SEMICOLON	;	3B
0x3C	LESS-THAN SIGN	<	3C
0x3D	EQUALS SIGN	=	3D
0x3E	GREATER-THAN SIGN	>	3E
0x3F	QUESTION MARK	?	3F
0x40	INVERTED EXCLAMATION MARK	¡	A1
0x41	LATIN CAPITAL LETTER A	A	41
0x42	LATIN CAPITAL LETTER B	B	42
0x43	LATIN CAPITAL LETTER C	C	43
0x44	LATIN CAPITAL LETTER D	D	44
0x45	LATIN CAPITAL LETTER E	E	45
0x46	LATIN CAPITAL LETTER F	F	46
0x47	LATIN CAPITAL LETTER G	G	47
0x48	LATIN CAPITAL LETTER H	H	48
0x49	LATIN CAPITAL LETTER I	I	49
0x4A	LATIN CAPITAL LETTER J	J	4A
0x4B	LATIN CAPITAL LETTER K	K	4B
0x4C	LATIN CAPITAL LETTER L	L	4C
0x4D	LATIN CAPITAL LETTER M	M	4D
0x4E	LATIN CAPITAL LETTER N	N	4E
0x4F	LATIN CAPITAL LETTER O	O	4F
0x50	LATIN CAPITAL LETTER P	P	50
0x51	LATIN CAPITAL LETTER Q	Q	51
0x52	LATIN CAPITAL LETTER R	R	52
0x53	LATIN CAPITAL LETTER S	S	53
0x54	LATIN CAPITAL LETTER T	T	54
0x55	LATIN CAPITAL LETTER U	U	55
0x56	LATIN CAPITAL LETTER V	V	56
0x57	LATIN CAPITAL LETTER W	W	57
0x58	LATIN CAPITAL LETTER X	X	58
0x59	LATIN CAPITAL LETTER Y	Y	59
0x5A	LATIN CAPITAL LETTER Z	Z	5A
0x5B	LATIN CAPITAL LETTER A WITH DIAERESIS	Ä	C4
0x5C	LATIN CAPITAL LETTER O WITH DIAERESIS	Ö	D6
0x5D	LATIN CAPITAL LETTER N WITH TILDE	Ñ	D1
0x5E	LATIN CAPITAL LETTER U WITH DIAERESIS	Ü	DC
0x5F	SECTION SIGN	§	A7
0x60	INVERTED QUESTION MARK	¿	BF
0x61	LATIN SMALL LETTER A	a	61
0x62	LATIN SMALL LETTER B	b	62
0x63	LATIN SMALL LETTER C	c	63
0x64	LATIN SMALL LETTER D	d	64
0x65	LATIN SMALL LETTER E	e	65
0x66	LATIN SMALL LETTER F	f	66
0x67	LATIN SMALL LETTER G	g	67
0x68	LATIN SMALL LETTER H	h	68
0x69	LATIN SMALL LETTER I	i	69
0x6A L	ATIN SMALL LETTER J	j	6A
0x6B	LATIN SMALL LETTER K	k	6B
0x6C	LATIN SMALL LETTER L	l	6C
0x6D	LATIN SMALL LETTER M	m	6D
0x6E	LATIN SMALL LETTER N	n	6E
0x6F	LATIN SMALL LETTER O	o	6F
0x70	LATIN SMALL LETTER P	p	70
0x71	LATIN SMALL LETTER Q	q	71
0x72	LATIN SMALL LETTER R	r	72
0x73	LATIN SMALL LETTER S	s	73
0x74	LATIN SMALL LETTER T	t	74
0x75	LATIN SMALL LETTER U	u	75
0x76	LATIN SMALL LETTER V	v	76
0x77	LATIN SMALL LETTER W	w	77
0x78	LATIN SMALL LETTER X	x	78
0x79	LATIN SMALL LETTER Y	y	79
0x7A	LATIN SMALL LETTER Z	z	7A
0x7B	LATIN SMALL LETTER A WITH DIAERESIS	ä	E4
0x7C	LATIN SMALL LETTER O WITH DIAERESIS	ö	F6
0x7D	LATIN SMALL LETTER N WITH TILDE	ñ	F1
0x7E	LATIN SMALL LETTER U WITH DIAERESIS	ü	FC
0x7F	LATIN SMALL LETTER A WITH GRAVE	à	E0

UCS2 ENCODING

UCS2 is the Unicode format required for SMS, as opposed to the later format UTF-16. Since each UCS2 character requires 2 bytes, the SMS message length is reduced to 70 characters: 140 bytes / 2 bytes = 70 characters. You must also set the correct Data Coding Scheme value, 0 x 08 or 8 in the case of UCS2. UCS2 encoding allows the use of emoticons in SMS and these are treated as characters so you can write it in your SMS as any other character. Unicode messages can be concatenated. The concatenation headers reduce the characters available for content as follows:

Number of SMS	Maximum Message Length
1	70 characters.
2	134 characters.
3	201 characters.
4	268 characters.
5	335 characters.
6	402 characters.
7	469 characters.
8	536 characters.

GET REPORTS (SMS LINK)

Once you have submitted a message and the message has been delivered to the handset, the operator responds with a delivery report. It could take seconds or 48 hours to receive the delivery report from the operator, depending on the network. In addition, SMS Link can send you reports whenever your client will open the URL in your message.

NOTE
To use this method you need to specify the url callback in the param "report_url" when
you send the message.

REQUEST TO YOUR SERVER

When we receive delivery reports we will send to your server instantly in batches, so each request can contain up to 1,000 delivery reports in a JSON format

DLR REQUEST

PARAMETERS

sms_id	The message id.
from	The sender of the message you sent.
to	The destination number of the message you sent.
custom	The custom value of the message you sent.
sms_date	The date & time of the message you sent in the format: YYYY-MM-DD HH:MM:SS
status	The status of the message, check the following table to see possible values.
dlr_date	The date & time of the status.

JSON

[
    {
        "sms_id":"034d2acec0eb44af842de6a00bf4d934",
        "from":"SUPERGOL",
        "to":"34666666666",
        "custom":"YourReferenceID-774843",
        "sms_date":"2015-06-02 01:43:47",
        "status":"DELIVRD",
        "dlr_date":"2015-06-02 01:43:50"
    },
    {
        "sms_id":"034d2acec0eb44af842de6a00bf4d892",
        "from":"SUPERGOL",
        "to":"34666666666",
        "custom":"YourReferenceID-774849",
        "sms_date":"2015-06-02 01:43:47",
        "status":"DELIVRD",
        "dlr_date":"2015-06-02 01:43:49"
    }
]

Two delivery reports sent

STATUS VALUES

DELIVRD	Message delivered to destination.
ACCEPTD	Message is in accepted state, this state is temporary.
EXPIRED	Message validity period has expired, the expiration of a message is 48 hours if not specified.
DELETED	Message has been deleted due to the operator's reasons.
UNDELIV	Message wasn't delivered by SMSC, expiration, not reachable, operator problems, portability...
UNKNOWN	Message is in unknown state, the operator is trying, maybe the cellphone is turned off.

LINK OPEN REQUEST

PARAMETERS

sms_id	The message id.
msisdn	The destination number of the message you sent and who has opened the landing page.
timestamp	The datetime when your client has clicked the link in the format: YYYY-MM-DD HH:MM:SS.
ip	The city from the landing page has been opened.

JSON

{
        "034d2acec0eb44af842de6a00bf4d934":
		{
		"msisdn":"34666666666",
		"timestamp":"2017-08-07 16:41:57",
		"ip":"8.8.8.8",
	}
}

YOUR SERVER RESPONSE

In order to accept the delivery reports, your server must respond with HTTP status code 200 OK. If you cannot process the data at this time, for example, due to a database problem, you can return any other error such as status code 500. If a status code other than 200 is received, the request will be retried every 30 minutes for a period of 6 hours.

RECEIVE SMS

To get started the first thing you need to do is buying a virtual number. This you can do in the panel.

NOTE
To use this method you need to specify the url callback in your account.

REQUEST TO YOUR SERVER

When we receive sms from the operator we will send it to your server instantly in batches, so each request can contain up to 1,000 messages in a JSON format.

PARAMETERS

sms_id	The message id.
from	The sender of the originator.
to	The destination number, this is your virtual number.
text	The content of the message.
sms_date	Date & time when we received the message from the operator, in the format YYYY-MM-DD HH:MM:SS.

JSON

[
    {
        "sms_id":"034d2acec0eb44af842de6a00bf4d934",
        "from":"34666666666",
        "to":"34666666667",
        "text":"Hello 1!",
        "sms_date":"2015-06-02 01:43:47"
    },
    {
        "sms_id":"034d2acec0eb44af842de6a00bf4d892",
        "from":"34666666666",
        "to":"34666666667",
        "text":"Hello 2!",
        "sms_date":"2015-06-02 01:45:03"
    }
]

Two messages sent to your server

YOUR SERVER RESPONSE

In order to accept the incoming messages, your server must respond with HTTP status code 200 OK. If you cannot process the data at this time, for example, due to a database problem, you can return any other error such as status code 500. If a status code other than 200 is received, the request will be retried every 30 minutes for a period of 6 hours

HLR SERVICE (LOOKUP)

With this method you can verify a mobile number in international format (msisdn). It will return the status of the desired number, including its validity, network and succint portability information. The HLR validation has a cost of 0.005€ per number.

ENDPOINT

https://api.gateway360.com/api/hlr/request

REQUEST

PARAMETERS

api_key	Your API Key.
msisdn	A mobile number in msisdn format.
	Mandatory

JSON

{
" api_key ": "399d2b438a53ebed3db8a7d52107f846" ,
" msisdn ": "34666666667"
}

PHP

$request = '{
"api_key":"399d2b438a53ebed3db8a7d52107f846",
"msisdn":"34666666667"
}' ;
$headers = array( 'Content-Type: application/json' );
$ch = curl_init( 'https://api.gateway360.com/api/hlr/request' );
curl_ setopt ( $ch , CURLOPT_POST, 1 );
curl_ setopt ( $ch , CURLOPT_RETURNTRANSFER, true );
curl_ setopt ( $ch , CURLOPT_HTTPHEADER, $headers );
curl_ setopt ( $ch , CURLOPT_POSTFIELDS, $request );
$result = curl_ exec ( $ch );
if (curl_errno( $ch ) != 0 ){
die( "curl error: " .curl_errno( $ch ));
}

JAVA

/** Imports */
import org.apache.http.HttpResponse;
import org.apache.http.client.HttpClient;
import org.apache.http.client.methods.HttpPost;
import org.apache.http.entity.StringEntity;
import org.apache.http.impl.client.HttpClientBuilder;
/** End imports */
HttpClient httpClient = HttpClientBuilder.create().build();
HttpPost request = new HttpPost( "https://api.gateway360.com/api/hlr/request" );
StringEntity params = new StringEntity(
"{" +
" \"api_key\":\"399d2b438a53ebed3db8a7d52107f846\"," +
" \"msisdn\":\"34666666667\"" +
"}" );
request.addHeader( "content-type" , "application/json" );
request.addHeader( "Accept" , "application/json" );
request.setEntity(params);
HttpResponse response = httpClient.execute(request);

RESPONSE

PARAMETERS

status	Status of request - either "ok" or "error"
msisdn	Requested number.
success	If the number lookup was successful. True or false.
mccmnc	Mobile Country Code (first 3 characters) and Mobile Network Code.
original_network	Mobile network the number belongs to.
error_id	In case of status being "error", this param will contain the error id.
error_msg	In case of status being "error", this param will contain additional information. Should only be used for debugging.

EXAMPLES

200 OK

{
 " status ": "ok" ,
 " result ":
 {
 "msisdn":"34666666666",
 "success":true,
 "mccmnc":"21403",
 "original_network":"MNO - Vodafone Espana",
 "ported":false
 }
}

One number lookup without portability

200 OK

{
 " status ": "ok" ,
 " result ":
 {
 "msisdn":"34666666666",
 "success":true,
 "mccmnc":"21403",
 "original_network":"MNO - Movistar (Telefonica Moviles Espana)",
 "ported":true,
 "ported_network":"MNO - Orange Espana"
 }
}

One number lookup with portability

200 OK

{
 " status ": "ok" ,
 " result ":
 {
 "msisdn":"34666666665",
 "success":false
 }
}

One number lookup about a number that is incorrect

400 Bad Request

{
 " status ": "error" ,
 " error_id ": "JSON_PARSE_ERROR" ,
 " error_msg ": "Your JSON was formatted incorrectly."
}

We couldn't process your request.

ERRORS

Error ID	Explanation
INVALID_CONTENT_TYPE	The content type must be: Content-Type: application/json
JSON_PARSE_ERROR	https://jsonlint.com/
MISSING_PARAMS	Your request is incomplete and missing some mandatory parameters.
UNAUTHORIZED	Your API key may be invalid, double-check that your API key was input correctly or see if the IP is blocked in your account API settings.
NOT_ENOUGH_BALANCE	Your account has no funds to process this request, add credits to your account and try again.
SERVICE_UNAVAILABLE	Service temporarily unavailable, try again later.

FACTOR AUTHENTICATION FLOW

Two-factor authentication (also known as 2FA) is a method of confirming a User's claimed identity by utilizing a combination of two different components. These components may be something that the User knows, something that the User possesses or something that is inseparable from the User (phone). In the next image we can see how the flow works in 2FA:

FLOW

In this image we can see the flow process:

1. The User specify his number in your App.
2. Your App sends a Request PIN to our platform. 2.1 (optional) Te platform make a HLR request to the Operator to check if the number is valid. This step is optional, if you don't want us to make a HLR request you just have to specify in the params of the step 2. 2.2 (optional) The Operator responds immediately with the results of the HLR Lookup. This step is optional, we recommend to do this step because in case it is an invalid number all the flow will stop in the step 3, so you can save money because we don't need to send the SMS with the PIN.

3. The platform responds to your request with the results, in case we did a HLR Lookup and It was an invalid number we will let you know in this reply, in case the number is valid we will continue with the flow.
4. The platform sends the SMS with the PIN to the Operator.
5. The Operator sends the SMS with the PIN to the User.
6. The Operator sends the Delivery Report to our platform.
7. (optional) The platform sends the Delivery Report to your App. The Delivery Report tells you if the message was delivered or not. This param is optional, you can specify in the step 2 in what URL do you want to receive the Delivery Report. Check format here.
8. User enters the PIN in your App.
9. Your App sends to our platform a Verify PIN request.
10. The platform responds with the result of the verification, only one time is possible to be verified. In the step 2 you can specify expiration, number of tries...

REQUEST PIN

Use this method to start the authentication process. Submit a mobile number in international format (MSISDN) to make the system send a verification SMS with a PIN code to that user on your behalf. You will later be able to verify the user's identity with that PIN code. If you send multiple requests for the same number, only the last PIN code generated will be valid, i.e. only the last SMS will allow the user to complete the authentication process.

ENDPOINT

https://api.gateway360.com/api/2fa/request

REQUEST

Parameters

api_key

Your API Key.

msisdn

Mobile number to verify in international format (must include country calling code).

sender

Sender field for the SMS (max 15 numeric or 11 alphanumeric characters).

hlr_lookup

Perform a HLR lookup to guarantee the validity of the MSISDN provided. Use this parameter to avoid the SMS being sent to invalid numbers. If set to 1 the operation will fail if the HLR query fails. Possible values 1 or 0. Defaults to 1.

sms_text

Text for the SMS. If specified, it must contain the placeholder string {PIN} exactly once, to be replaced by the generated PIN code. Max SMS length is 160 characters minus the length of the PIN code.

report_url

Callback url to receive the SMS delivery report (DLR). For details on the format of this dlr, see Get Reports (Callback). Note that this delivery report only contains the status of the SMS sent to the user, not the actual verification process.

pin_params

type	Type of characters for the generated PIN code. Allowed values are numeric, alpha and alphanumeric. Letters will always be uppercase. Defaults to numeric.
length	Length of the generated PIN code. Between 4 and 16. Defaults to 6.
expires_in	Seconds until the PIN code expires and is rendered invalid. 0 for unlimited validity (not recommended). Defaults to 3600 (1 hour).
max_tries	Maximum number of failed confirmation attempts before the code is rendered invalid permanently. 0 for unlimited retries (not recommended). Defaults to 3.

JSON

{
    "api_key":"399d2b438a53ebed3db8a7d52107f846",
    "msisdn":"34666666111",
    "sender":"GOOD PIZZA",
    "hlr_lookup":1
}

PHP

$request = '{
    "api_key":"399d2b438a53ebed3db8a7d52107f846",
    "msisdn":"34666666111",
    "sender":"GOOD PIZZA",
    "hlr_lookup":1
}';
        	
$headers = array('Content-Type: application/json');        	

$ch = curl_init('https://api.gateway360.com/api/2fa/request');
curl_setopt($ch, CURLOPT_POST, 1);
curl_setopt($ch, CURLOPT_RETURNTRANSFER,true);
curl_setopt($ch, CURLOPT_HTTPHEADER, $headers);
curl_setopt($ch, CURLOPT_POSTFIELDS, $request);

$result = curl_exec($ch);
 
if (curl_errno($ch) != 0 ){
	die("curl error: ".curl_errno($ch));
}

Java

/** Imports */
import org.apache.http.HttpResponse;
import org.apache.http.client.HttpClient;
import org.apache.http.client.methods.HttpPost;
import org.apache.http.entity.StringEntity;
import org.apache.http.impl.client.HttpClientBuilder;
/** End imports */


HttpClient httpClient = HttpClientBuilder.create().build();
HttpPost request = new HttpPost("https://api.gateway360.com/api/2fa/request");

StringEntity params = new StringEntity(
"{" +
"    \"api_key\":\"399d2b438a53ebed3db8a7d52107f846\"," +
"    \"msisdn\":\"34666666111\"," +
"    \"sender\":\"GOOD PIZZA\"," +
"    \"hlr_lookup\":1" +
"}");

request.addHeader("content-type", "application/json");
request.addHeader("Accept","application/json");
request.setEntity(params);
HttpResponse response = httpClient.execute(request);
.asString();

RESPONSE

Parameters

status	Final status of request - either "ok" or "error"
error_id	In case of status being "error", this will indicate the error code.
error_msg	In case of status being "error", this param will contain additional information. Should only be used for debugging.

Example 1

200 OK

{
    "status":"ok"
}

Two messages successfully processed

Example 2

200 OK

{
    "status":"error",
    "error_id":"INVALID_NUMBER",
    "error_msg":"HLR query returned error."
}

We didn't continue processing your request because the MSISDN wasn't valid.

Example 3

401 Unauthorized

{
    "status":"error",
    "error_id":"UNAUTHORIZED",
    "error_msg":"Your API key may be invalid or your IP is blocked."
}

We didn't continue processing your request because your API Key wasn't valid.

Example 3

400 Bad Request

{
    "status":"error",
    "error_id":"JSON_PARSE_ERROR",
    "error_msg":"Your JSON was formatted incorrectly."
}

We couldn't process your request.

ERRORS

Error ID Explanation
INVALID_CONTENT_TYPE	The content type must be: Content-Type: application/json
JSON_PARSE_ERROR	Your JSON was formatted incorrectly or was considered otherwise improper or incomplete. Check it here.
MISSING_PARAMS	Your request is incomplete and missing some mandatory parameters.
BAD_PARAMS	One or more of your parameters has incorrect format or value.
UNAUTHORIZED	Your API key may be invalid, double-check that your API key was input correctly or see if the IP is blocked in your account API settings.
INVALID_HLR_LOOKUP_PARAM	Invalid hlr_lookup param provided.
INVALID_PIN_PARAMS	Invalid pin configuration parameters provided.
INVALID_SMS_TEXT	The SMS text was deemed invalid. Either too long or mising the {PIN} placeholder.
INVALID_SENDER	The sender address (from parameter) was not allowed for this message.
INVALID_NUMBER	HLR query returned error. The number must be in MSISDN format. Check format here.
NOT_ENOUGH_BALANCE	Your account has no funds to process this request, add credits to your account and try again.
UNKNOWN_ERROR	The system threw an unknown error.

VERIFY PIN

Use this method to verify the PIN code provided by a user. Submit the number (msisdn) along the PIN code that was previously delivered to them via SMS with the 'Request' method to verify against our records.

In order for verification to succeed, you must provide a valid MSISDN-PIN pair that has not expired nor exhausted its allowed maximum validation attempts, as per the settings specified with the 'Request' method.

If verification fails a number of times greater than was specified with the max_tries setting (3 by default), the PIN code will be rendered invalid

ENDPOINT

https://api.gateway360.com/api/2fa/verify

REQUEST

Parameters

api_key	Your API Key.
msisdn	A mobile number that has previously requested verification.
pin	The verification pin received by the user.

JSON

{
    "api_key":"399d2b438a53ebed3db8a7d52107f846",
    "msisdn":"34666666111",
    "pin":"581365"
}

PHP

$request = '{
    "api_key":"399d2b438a53ebed3db8a7d52107f846",
    "msisdn":"34666666111",
    "pin":"581365"
}';
        	
$headers = array('Content-Type: application/json');        	

$ch = curl_init('https://api.gateway360.com/api/2fa/verify');
curl_setopt($ch, CURLOPT_POST, 1);
curl_setopt($ch, CURLOPT_RETURNTRANSFER,true);
curl_setopt($ch, CURLOPT_HTTPHEADER, $headers);
curl_setopt($ch, CURLOPT_POSTFIELDS, $request);

$result = curl_exec($ch);
 
if (curl_errno($ch) != 0 ){
	die("curl error: ".curl_errno($ch));
}

Java

/** Imports */
import org.apache.http.HttpResponse;
import org.apache.http.client.HttpClient;
import org.apache.http.client.methods.HttpPost;
import org.apache.http.entity.StringEntity;
import org.apache.http.impl.client.HttpClientBuilder;
/** End imports */


HttpClient httpClient = HttpClientBuilder.create().build();
HttpPost request = new HttpPost("https://api.gateway360.com/api/2fa/verify");

StringEntity params = new StringEntity(
"{" +
"    \"api_key\":\"399d2b438a53ebed3db8a7d52107f846\"," +
"    \"msisdn\":\"34666666111\"," +
"    \"pin\":\"581365\"" +
"}");

request.addHeader("content-type", "application/json");
request.addHeader("Accept","application/json");
request.setEntity(params);
HttpResponse response = httpClient.execute(request);

.asString();

RESPONSE

Parameters

status	Final request status - either "ok" or "error"
result	In case of status being "ok", result will contain details about the operation
	verified	true or false
	previously_verified	Only if verified is true. Indicates whether the PIN has already been verified at least once
	tries_remaining	Only if verified is false and the max_tries setting is not 0. Indicates the number of attempts remaining to verify the specified msisdn.
	message	A human readable message explaining the obtained result.
error_id	In case of status being "error", this param will contain the error id.
error_msg	In case of status being "error", this param will contain additional information. Should only be used for debugging

Examples

200 OK

{
" status ": "ok" ,
" result ":
{
"verified":true,
"previously_verified":false,
"message":"PIN code verified."
 }
}

User successfully verified

200 OK

{
" status ": "ok" ,
" result ":
{
"verified":false,
"tries_remaining":2,
"message":"Invalid PIN code."
 }
}

Unsuccesful verification. 2 Tries remaining.

401 Unauthorized

{
 " status ": "error" ,
 " error_id ": "UNAUTHORIZED" ,
 " error_msg ": "Your API key may be invalid or your IP is blocked."
}

We didn't continue processing your request because your API Key wasn't valid.

400 Bad Request

{
 " status ": "error" ,
 " error_id ": "INVALID_CONTENT_TYPE" ,
 " error_msg ": "Invalid Content-Type; must be application/json."
}

We couldn't process your request.

ERRORS

Error ID	Explanation
INVALID_CONTENT_TYPE	The content type must be: Content-Type: application/json
JSON_PARSE_ERROR	https://jsonlint.com/
MISSING_PARAMS	Your request is incomplete and missing some mandatory parameters.
BAD_PARAMS	One or more of your parameters has incorrect format or value.
UNAUTHORIZED	Your API key may be invalid, double-check that your API key was input correctly or see if the IP is blocked in your account API settings.
RECORD_NOT_FOUND	No valid record found for the specified MSISDN-PIN pair.
NOT_VERIFIED	The verification pin is invalid.

ACCOUNT

GET BALANCE

Check your account balance or a subaccount balance.

ENDPOINT

https://api.gateway360.com/api/3.0/account/get-balance

REQUEST

PARAMETERS

api_key	Your API Key

JSON

{

" api_key ": "399d2b438a53ebed3db8a7d52107f846"

}

PHP

$request = '{

"api_key":"399d2b438a53ebed3db8a7d52107f846"

}' ; $headers = array( 'Content-Type: application/json' ); $ch = curl_init( 'https://api.gateway360.com/api/3.0/account/get-balance' ); curl_ setopt ( $ch , CURLOPT_POST, 1 ); curl_ setopt ( $ch , CURLOPT_RETURNTRANSFER, true ); curl_ setopt ( $ch , CURLOPT_HTTPHEADER, $headers ); curl_ setopt ( $ch , CURLOPT_POSTFIELDS, $request ); $result = curl_ exec ( $ch ); if ( !curl_errno( $ch ) )

$result = json_decode( $result );

else

$result = curl_error( $ch );

print _r( $result );

JAVA

/** Imports */ import org.apache.http.HttpResponse; import org.apache.http.client.HttpClient; import org.apache.http.client.methods.HttpPost; import org.apache.http.entity.StringEntity; import org.apache.http.impl.client.HttpClientBuilder; /** End imports */ HttpClient httpClient = HttpClientBuilder.create().build(); HttpPost request = new HttpPost( "https://api.gateway360.com/api/3.0/account/ge t-balance" ); StringEntity params = new StringEntity( "{" + " \"api_key\":\"399d2b438a53ebed3db8a7d52107f846\"" + "}" ); request.addHeader( "content-type" , "application/json" ); request.addHeader( "Accept" , "application/json" ); request.setEntity(params); HttpResponse response = httpClient.execute(request);

RESPONSE

PARAMETERS

status	The sending status of request - either "ok", "error"
result	Object with the result.
	balance	The balance amount of your account, not that it's with 4 decimals, Ex: 155.2493
	currency	Either EUR, USD, GBP, CREDITS, SMS, ...
error_id	In case the status values "error" we will indicate you here the error id.
error_msg	In case the status values "error" this param has additional information. This param should be use just for debugging.

EXAMPLE 1

200 OK

{

" status ": "ok" ,
" result ": {
"balance":"350.1234",
"currency":"EUR"
}

}

Your account has 350,12 €

ERRORS

Error ID	Explanation
INVALID_CONTENT_TYPE	The content type must be: Content-Type: application/json
JSON_PARSE_ERROR	Your JSON was formatted incorrectly or was considered otherwise improper or incomplete. https://jsonlint.com/
MISSING_PARAMS	Your request is incomplete and missing some mandatory parameters
UNAUTHORIZED	Your API key may be invalid, double-check that your API key was input correctly or see if your current IP is blocked in your account API settings.

GET PRICING

Check your account pricing

Pricing for a given country

ENDPOINT

https://api.gateway360.com/api/3.0/account/pricing/sms/get-country-pricing

REQUEST

PARAMETERS

api_key	Your API Key.
country_code	A country in ISO alpha2 format. If the parameter isn't passed, all countries will be returned
	Mandatory
	Optional

JSON

{
 " api_key ": "399d2b438a53ebed3db8a7d52107f846" ,
 " country_code ": "ES" ,
}

PHP

$request = '{
 "api_key":"399d2b438a53ebed3db8a7d52107f846",
 "country_code":"ES",
}' ;
$headers = array( 'Content-Type: application/json' ); 
$ch = curl_init( 'https://api.gateway360.com/api/3.0/account/pricing/sms/get-cou
ntry-pricing' );
curl_ setopt ( $ch , CURLOPT_POST, 1 );
curl_ setopt ( $ch , CURLOPT_RETURNTRANSFER, true );
curl_ setopt ( $ch , CURLOPT_HTTPHEADER, $headers );
curl_ setopt ( $ch , CURLOPT_POSTFIELDS, $request );
$result = curl_ exec ( $ch );
if ( !curl_errno( $ch ) )
 $result = json_decode( $result );
else
 $result = curl_error( $ch );

print _r( $result );

JAVA

/** Imports */
import org.apache.http.HttpResponse;
import org.apache.http.client.HttpClient;
import org.apache.http.client.methods.HttpPost;
import org.apache.http.entity.StringEntity;
import org.apache.http.impl.client.HttpClientBuilder;
/** End imports */
HttpClient httpClient = HttpClientBuilder.create().build();
HttpPost request = new HttpPost( "https://api.gateway360.com/api/3.0/account/ge
t-balance" );
StringEntity params = new StringEntity(
"{" +
" \"api_key\":\"399d2b438a53ebed3db8a7d52107f846\"" +
" \"country_code\":\"ES\"" +
"}" );
request.addHeader( "content-type" , "application/json" );
request.addHeader( "Accept" , "application/json" );
request.setEntity(params);
HttpResponse response = httpClient.execute(request);

RESPONSE

PARAMETERS

status	Status of request - either "ok" or "error"
name	Name of the country.
prefix	Prefix for that country.
networks	Available networks for that country.
code	Mobile Country Code (first 3 characters) and Mobile Network Code.
network	Specific network.
price	Price for that network.
error_id	In case of status being "error", this param will contain the error id.
error_msg	In case of status being "error", this param will contain additional information. Should only be used for debugging.

EXAMPLE

200 OK

{
 " status ": "ok" ,
 " result ": {
 "ES":{
"name":"Spain",
"prefix":"34",
"networks":{
"0":{
"code":"21401",
"network":"MNO - Vodafone Espana",
"price":"0.0520"
},
"1":{
"code":"21403",
"network":"MNO - Orange Espana",
"price":"0.0520"
},
"2":{
"code":"21407",
"network":"MNO - Movistar (Telefonica Moviles Esp
ana)",
"price":"0.0520"
},
"3":{
"code":"21404",
"network":"MNO - Yoigo (Xfera Moviles)",
"price":"0.0520"
}
}
}
 }
}

ERRORS

Error ID	Explanation
INVALID_CONTENT_TYPE	The content type must be: Content-Type: application/json
JSON_PARSE_ERROR	Your JSON was formatted incorrectly or was considered otherwise improper or incomplete. https://jsonlint.com/
MISSING_PARAMS	Your request is incomplete and missing some mandatory parameters.
UNAUTHORIZED	Your API key may be invalid, double-check that your API key was input correctly or see if your current IP is blocked in your account API settings.

Pricing for a given prefix

ENDPOINT

https://api.gateway360.com/api/3.0/account/pricing/sms/get-prefix-pricing

REQUEST

JSON

{
 " api_key ": "399d2b438a53ebed3db8a7d52107f846" ,
 " prefix ": "34" ,
}

PHP

$request = '{
 "api_key":"399d2b438a53ebed3db8a7d52107f846",
 "prefix":"34",
}' ;
$headers = array( 'Content-Type: application/json' );
$ch = curl_init( 'https://api.gateway360.com/api/3.0/account/pricing/sms/get-pre
fix-pricing' );
curl_ setopt ( $ch , CURLOPT_POST, 1 );
curl_ setopt ( $ch , CURLOPT_RETURNTRANSFER, true );
curl_ setopt ( $ch , CURLOPT_HTTPHEADER, $headers );
curl_ setopt ( $ch , CURLOPT_POSTFIELDS, $request );
$result = curl_ exec ( $ch );
if ( !curl_errno( $ch ) )
 $result = json_decode( $result );
 else
 $result = curl_error( $ch );
print _r( $result );

JAVA

/** Imports */
import org.apache.http.HttpResponse;
import org.apache.http.client.HttpClient;
import org.apache.http.client.methods.HttpPost;
import org.apache.http.entity.StringEntity;
import org.apache.http.impl.client.HttpClientBuilder;
/** End imports */
HttpClient httpClient = HttpClientBuilder.create().build();
HttpPost request = new HttpPost( "https://api.gateway360.com/api/3.0/account/ge
t-balance" );
StringEntity params = new StringEntity(
"{" +
" \"api_key\":\"399d2b438a53ebed3db8a7d52107f846\"" +
" \"prefix\":\"34\"" +
"}" );
request.addHeader( "content-type" , "application/json" );
request.addHeader( "Accept" , "application/json" );
request.setEntity(params);
HttpResponse response = httpClient.execute(request);

RESPONSE

status	Status of request - either "ok" or "error"
name	Name of the country.
prefix	Prefix for that country
networks	Available networks for that country
code	Mobile Country Code (first 3 characters) and Mobile Network Code.
network	Specific network.
price	Price for that network.
error_id	In case of status being "error", this param will contain the error id
error_msg	In case of status being "error", this param will contain additional information. Should only be used for debugging.

EXAMPLE

200 OK

{
 " status ": "ok" ,
 " result ": {
 "ES":{
"name":"Spain",
"prefix":"34",
"networks":{
"0":{
"code":"21401",
"network":"MNO - Vodafone Espana",
"price":"0.0520"
},
"1":{
"code":"21403",
"network":"MNO - Orange Espana",
"price":"0.0520"
},
"2":{
"code":"21407",
"network":"MNO - Movistar (Telefonica Moviles Esp
ana)",
"price":"0.0520"
},
"3":{
"code":"21404",
"network":"MNO - Yoigo (Xfera Moviles)",
"price":"0.0520"
}
}
}
 }
}

ERRORS

Error ID	Explanation
INVALID_CONTENT_TYPE	The content type must be: Content-Type: application/json
JSON_PARSE_ERROR	Your JSON was formatted incorrectly or was considered otherwise improper or incomplete. https://jsonlint.com/
MISSING_PARAMS	Your request is incomplete and missing some mandatory parameters
UNAUTHORIZED	Your API key may be invalid, double-check that your API key was input correctly or see if your current IP is blocked in your account API settings.